To Kranz, or not to Kranz? That is the question...
- Peach
- 4 valves
- Posts: 701
- Joined: Thu Mar 17, 2005 8:42 am
- Location: London, UK
To Kranz, or not to Kranz? That is the question...
Curious about the addition of a Kranz on a given tuba bell.
Mira 191 has a Kranz and obviously rotors but the bell and bows are (I think) identical to the 1291 (Bb) with pistons and no Kranz.
There is a tradition for older tubas from European makers to have a Kranz but I always thought that was more to stabilise an otherwise very thin bell 'edge' from the making process.
So is the Kranz on the Mira 191doing anything much or is it more cosmetic?
And why is it extremely rare to find a Kranz on a piston horn?
Just pondering...
Thanks,
MP
Mira 191 has a Kranz and obviously rotors but the bell and bows are (I think) identical to the 1291 (Bb) with pistons and no Kranz.
There is a tradition for older tubas from European makers to have a Kranz but I always thought that was more to stabilise an otherwise very thin bell 'edge' from the making process.
So is the Kranz on the Mira 191doing anything much or is it more cosmetic?
And why is it extremely rare to find a Kranz on a piston horn?
Just pondering...
Thanks,
MP
Peach
- pjv
- 4 valves
- Posts: 879
- Joined: Sun Jul 11, 2004 4:39 am
Re: To Kranz, or not to Kranz? That is the question...
I think you hit the nail on the head; moreover, the 191 kranz looks like a fake kranz, slapped onto one side of the bell. Cosmetic, like you said, and not a real kranz.
As far as I can tell, the 191 is an American-style tuba but with rotary valves. Same bore as the 1291, same bows, and most important, same short US-tuba style mouthpipe.
You don't see a kranz on a piston tuba because piston tuba's aren't fabricated with German-style bells, even if they are German made.
Hopefully someone who REALLY knows will chime in. These are my conclusions from my limited observations. A technician has way more experience in this matter.
Btw, are you happy with your 191?
As far as I can tell, the 191 is an American-style tuba but with rotary valves. Same bore as the 1291, same bows, and most important, same short US-tuba style mouthpipe.
You don't see a kranz on a piston tuba because piston tuba's aren't fabricated with German-style bells, even if they are German made.
Hopefully someone who REALLY knows will chime in. These are my conclusions from my limited observations. A technician has way more experience in this matter.
Btw, are you happy with your 191?
- Peach
- 4 valves
- Posts: 701
- Joined: Thu Mar 17, 2005 8:42 am
- Location: London, UK
Re: To Kranz, or not to Kranz? That is the question...
Hi. I was, for a short time, looking at getting a lovely 5v goldbrass 191, but the deal wasn't to be.
This weekend I'm getting a 5v 1291 Bb however =)
This weekend I'm getting a 5v 1291 Bb however =)
Peach
- oedipoes
- 4 valves
- Posts: 765
- Joined: Wed Mar 26, 2008 3:47 pm
- Location: Belgium
Re: To Kranz, or not to Kranz? That is the question...
To replace the PBK, or in addition? (just curious)Peach wrote:Hi. I was, for a short time, looking at getting a lovely 5v goldbrass 191, but the deal wasn't to be.
This weekend I'm getting a 5v 1291 Bb however =)
- Peach
- 4 valves
- Posts: 701
- Joined: Thu Mar 17, 2005 8:42 am
- Location: London, UK
Re: To Kranz, or not to Kranz? That is the question...
Hey. So the PBK sadly went back for return. When I tried it out in the factory I loved it. It was raw brass. I had it plated and the leadpipe adjusted before I had them send it to me. Anyway, when I got it, it was mostly excellent, but there were some notes that were a real problem. I couldn't figure out what was causing it and had a couple of techs look it over with borescope etc etc. Anyway, in the end to avoid tearing it down at my expense and trying a bunch of leadpioes etc, Dietrich and I worked a deal to send it back. I'm sure someone's happily playing it now... =)
Peach
- Peach
- 4 valves
- Posts: 701
- Joined: Thu Mar 17, 2005 8:42 am
- Location: London, UK
Re: To Kranz, or not to Kranz? That is the question...
PS. Anyone have any thoughts on bell Kranz?
Peach
- windshieldbug
- Once got the "hand" as a cue
- Posts: 11512
- Joined: Tue Mar 01, 2005 4:41 pm
- Location: 8vb
Re: To Kranz, or not to Kranz? That is the question...
Thought:
I have horns with and without and my suspicion is that it works just like lacquer, silver and raw brass. It DOES, in fact, make a difference within a 10’ radius, but any further than that it’s simply the bore profile.
I have horns with and without and my suspicion is that it works just like lacquer, silver and raw brass. It DOES, in fact, make a difference within a 10’ radius, but any further than that it’s simply the bore profile.
Instead of talking to your plants, if you yelled at them would they still grow, but only to be troubled and insecure?
- Peach
- 4 valves
- Posts: 701
- Joined: Thu Mar 17, 2005 8:42 am
- Location: London, UK
Re: To Kranz, or not to Kranz? That is the question...
?windshieldbug wrote:Thought:
I have horns with and without and my suspicion is that it works just like lacquer, silver and raw brass. It DOES, in fact, make a difference within a 10’ radius, but any further than that it’s simply the bore profile.
Peach
- oedipoes
- 4 valves
- Posts: 765
- Joined: Wed Mar 26, 2008 3:47 pm
- Location: Belgium
Re: To Kranz, or not to Kranz? That is the question...
To your question, I think it does make a difference...
The Miraphone Hagen for example is without kranz for some reason.
The Miraphone Hagen for example is without kranz for some reason.
- pjv
- 4 valves
- Posts: 879
- Joined: Sun Jul 11, 2004 4:39 am
- pjv
- 4 valves
- Posts: 879
- Joined: Sun Jul 11, 2004 4:39 am
Re: To Kranz, or not to Kranz? That is the question...
maybe a more informative read
viewtopic.php?f=2&t=44946&start=0" target="_blank
viewtopic.php?f=2&t=44946&start=0" target="_blank
- Dan Schultz
- TubaTinker
- Posts: 10424
- Joined: Thu Mar 18, 2004 10:46 pm
- Location: Newburgh, Indiana
- Contact:
Re: To Kranz, or not to Kranz? That is the question...
I've always regarded a garland as just a different way to build a bell rim. I'm just guessing that you can order from Miraphone either way... especially in the case of the 1291 and 191 horns which I believe share the same bell profile. The 'fake' garland could be and afterthought to knock off overtones.
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
- imperialbari
- 6 valves
- Posts: 7461
- Joined: Fri Mar 19, 2004 3:47 am
Re: To Kranz, or not to Kranz? That is the question...
Within the horn world the Kranz originally was used to prevent instruments with thin, hammered bell flares from breaking up too early in the dynamic bandwidth.
Klaus
Klaus
- Dan Schultz
- TubaTinker
- Posts: 10424
- Joined: Thu Mar 18, 2004 10:46 pm
- Location: Newburgh, Indiana
- Contact:
Re: To Kranz, or not to Kranz? That is the question...
I would have said that instead of 'garland' but my stupid spell check would not let me!bloke wrote:In Mainz, they always use a kranz.
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
- imperialbari
- 6 valves
- Posts: 7461
- Joined: Fri Mar 19, 2004 3:47 am
Re: To Kranz, or not to Kranz? That is the question...
That is a positive side effect.bloke wrote:...and I always thought that the purpose was to add strength to a brass instrument's bell's edge.
Spun bells have thicker walls at the edge than where the bell is joined to the stack. Less need for a garland there.
Bells with gussets may also be hammered, but the thinning is less radical. That was the old British way of making low brass bells. No garlands in that tradition.
Also in other places there is a connection between acoustic design and structural strengthening.
While I waited 3 months for my Besson 981 to be made during the spring of 1999, I loaned a sample of same size Eb tuba out of Besson’s 700-series. No compensating system and less wire attached to the outside of the 1st branchand top bow. The benefit for the model intended for students was less weight and an easier response. Only the range was very uneven. Ab on top of the bass stave would be much louder than the surrounding notes without me pushing that note at all.
The 981 has the wire going higher up onto the top bow, and does not have these uneven notes sticking out. It is a little less responsive, but it then is much more controllable. Besson used pneumatic expansion and forming inside a mold for their bows. That is bound to let the outer perimeter of the bows have thinner walls than the inner perimeters, so the guard strip would dampen theamplitude of thin metal very easily set into oscillation.
Same toes for bottom bow guards and for the guards and wires on the fat knee of sousaphone bells.
Tuba Exchange, at least 20 years ago, sold Miraphone 186 BBb tubas made to their own specs. No garland, no nickel silver outer slides. Immediate effect was a lower price, but my strong suspicion would be that these tubas also were very responsive, which I would consider a benefit for student instruments, even if they also may have been less durable in school environments.
Klaus
- imperialbari
- 6 valves
- Posts: 7461
- Joined: Fri Mar 19, 2004 3:47 am
Re: To Kranz, or not to Kranz? That is the question...
Of course not. If no Kranz there would be one of the severral other types of edge reinforcement. The Kranz only being the variant covering the most of the rim area and providing most stiffness.
Klaus
Klaus
- pjv
- 4 valves
- Posts: 879
- Joined: Sun Jul 11, 2004 4:39 am
Re: To Kranz, or not to Kranz? That is the question...
Not to mention the damage mid 20thC music could have on your instrument; plopping mpc's, banging on your valves, scrapping the bell across the floor, ticking with a ring on the instrument, slapping your hand on the bell, etc.
Glad we made it to the 21stC were we only have to play massively loud low notes at every single climax.
Glad we made it to the 21stC were we only have to play massively loud low notes at every single climax.
- imperialbari
- 6 valves
- Posts: 7461
- Joined: Fri Mar 19, 2004 3:47 am
Re: To Kranz, or not to Kranz? That is the question...
Never came across a Conn VocaBell instrument, so I have never seen a bell edge without some sort of rounded reinforcement.
As for damages: In a school context they may be hard to avoid. But I have a hard time accepting damage that has been done intentionally.
I once saw a photo of a King BBb tuba owned by a US public school. The inner top bow was badly dented. Whereas the outer bow was intact. That damage could not have come from the tuba being toppled over. That inner top bow had been kicked with a hard boot.
With that attitude among students the choice of tuba style doesn’t really matter. My preferred solution to instrument care is about letting students buy their own instruments. (And then I also prefer piston tubas).
Klaus
As for damages: In a school context they may be hard to avoid. But I have a hard time accepting damage that has been done intentionally.
I once saw a photo of a King BBb tuba owned by a US public school. The inner top bow was badly dented. Whereas the outer bow was intact. That damage could not have come from the tuba being toppled over. That inner top bow had been kicked with a hard boot.
With that attitude among students the choice of tuba style doesn’t really matter. My preferred solution to instrument care is about letting students buy their own instruments. (And then I also prefer piston tubas).
Klaus
- imperialbari
- 6 valves
- Posts: 7461
- Joined: Fri Mar 19, 2004 3:47 am
Re: To Kranz, or not to Kranz? That is the question...
If I have touched banned topics, I am still unaware of which part of my post breaks any rule. I have not asked for any funding, nor hawked commercial stuff. Not even discussed politics. But as a retired teacher I still happen to have opinions on matters related to education.
Klaus
Klaus
- ken k
- 6 valves
- Posts: 2369
- Joined: Sun Mar 21, 2004 11:02 pm
- Location: out standing in my field....
Re: To Kranz, or not to Kranz? That is the question...
do you have one for sale? I have always wanted one of those puppies....bloke wrote:ok...
It seems to me that French (rolled) rims seem to be found more on thicker gauge (.6mm or thicker) bells, and kranz rims seems to be found more on thinner gauge (.5mm or thinner) bells.
Many French rims tend to have a copper/brass wire inside (or nothing at all) whereas more kranz rims tend to feature a steel wire inside.
Experience has shown me that the .5mm thickness tuba bells (kranz with steel wire) will still end up with more creases with equal levels of abuse.
This type of bell + rotary valves (tendency towards delicate mechanisms + vulnerable valve stems which are integral parts of the valve bodies themselves), I've consistently contended, is not the best choice (imo) for school use - particularly with post-mid-century-style parenting - combined with widespread juvenile substance abuse, etc. I don't argue with band directors, though, as they want what they want...and - at least - I've found a maker that builds the lever carriage brackets and braces in a titanic manner - out of double-thickness material - along with the large-size Minibal links, in conjunction with heavy-wall French (rolled) rim bells.
back to the topic (bell sheet metal thickness related to rim style choice)...
Conn "Vocabell" instruments' bells were even thicker, and - thus - rimless.
bloke " 'anyone here like to buy a Vocabell trombone...??"
kk
Yamaha YEB-381
Mirafone 187 BBb
1919 Pan American BBb Helicon
1924 Buescher BBb tuba (Dr. Suessaphone)
Black plastic Coolwind BBb tuba
2001 Mazda Miata
2006 Suzuki Burgman 650
Mirafone 187 BBb
1919 Pan American BBb Helicon
1924 Buescher BBb tuba (Dr. Suessaphone)
Black plastic Coolwind BBb tuba
2001 Mazda Miata
2006 Suzuki Burgman 650