Used set of MAW valves, used about 2+ years in a MW 2250. I switched them out because I feel the 2250 already is plenty free blowing. $950 located in Hopewell, VA.
MAW valves FS SOLD
Forum rules
This forum is for buying or selling your personal equipment. Sponsored selling is allowed as well. All ads are required to have the following information: Price (even for trades), brand, model, and location (City and State, for instruments, not accessories). It is acceptable to link to an external ad if you are promoting a sale of your personal equipment. No Ebay auctions, but "Buy It Now" listings are fine. Photos are HIGHLY suggested as well, and may be hosted on Google Drive, or elsewhere. If you see an ad that does not meet these criteria, please report it.
This forum is for buying or selling your personal equipment. Sponsored selling is allowed as well. All ads are required to have the following information: Price (even for trades), brand, model, and location (City and State, for instruments, not accessories). It is acceptable to link to an external ad if you are promoting a sale of your personal equipment. No Ebay auctions, but "Buy It Now" listings are fine. Photos are HIGHLY suggested as well, and may be hosted on Google Drive, or elsewhere. If you see an ad that does not meet these criteria, please report it.
- jtuba
- pro musician
- Posts: 711
- Joined: Fri Mar 19, 2004 8:35 am
- Location: Norfolk, VA
MAW valves FS SOLD
Last edited by jtuba on Sun Dec 09, 2018 6:43 pm, edited 1 time in total.
- jtuba
- pro musician
- Posts: 711
- Joined: Fri Mar 19, 2004 8:35 am
- Location: Norfolk, VA
- jtuba
- pro musician
- Posts: 711
- Joined: Fri Mar 19, 2004 8:35 am
- Location: Norfolk, VA
- jtuba
- pro musician
- Posts: 711
- Joined: Fri Mar 19, 2004 8:35 am
- Location: Norfolk, VA
-
- lurker
- Posts: 11
- Joined: Tue Feb 16, 2016 2:29 am
Re: MAW valves FS
How could I find out if these will fit a VMI Neptune? I know they are pretty universal and B&S and Meinl use the same valve blocks for a lot of things, I am just curious if there is a fool proof method?
- jtuba
- pro musician
- Posts: 711
- Joined: Fri Mar 19, 2004 8:35 am
- Location: Norfolk, VA
Re: MAW valves FS
I did just the "pay-receive-try...." for another member of the forum and am willing to do so again. Thanks.bloke wrote:A couple of careful measurements with $15 Chinese calipers should tell the story...OR ($7.50 one-way or $15 round-trip) Priority Mail postage (pay - receive - try - keep-or-return-for-refund) should accomplish the same thing.TubaMerle98 wrote:How could I find out if these will fit a VMI Neptune? I know they are pretty universal and B&S and Meinl use the same valve blocks for a lot of things, I am just curious if there is a fool proof method?
Not attempting to be a wise-guy, I would point out that this is less than the cost of two tickets to see a bad movie.
-
- lurker
- Posts: 11
- Joined: Tue Feb 16, 2016 2:29 am
Re: MAW valves FS
Would the inside diameter of the valve casing be sufficient? Or should I look at different dimensions too?
- jtuba
- pro musician
- Posts: 711
- Joined: Fri Mar 19, 2004 8:35 am
- Location: Norfolk, VA
- The Big Ben
- 6 valves
- Posts: 3169
- Joined: Sat Dec 16, 2006 11:54 am
- Location: Port Townsend, WA
Re: MAW valves FS
Properly fitting valves need to be within +/- .0001" top to bottom so you will need to ake that into allowance. Would seem that the pistons and cylinders need to be at the same place at the same time with qualified personnel to evaluate the fit and, if necessary, to adjust the fit.TubaMerle98 wrote:Would the inside diameter of the valve casing be sufficient? Or should I look at different dimensions too?