A mouthpiece angular sweet spot... really?

The bulk of the musical talk
User avatar
Ken Crawford
4 valves
4 valves
Posts: 722
Joined: Sat Jun 23, 2012 10:45 am
Location: Rexburg, ID

Re: A mouthpiece angular sweet spot... really?

Post by Ken Crawford »

No. That is beyond silly. Don't give it another thought.
User avatar
windshieldbug
Once got the "hand" as a cue
Once got the "hand" as a cue
Posts: 11511
Joined: Tue Mar 01, 2005 4:41 pm
Location: 8vb

Re: A mouthpiece angular sweet spot... really?

Post by windshieldbug »

The person mentioned should clean their mouthpiece more regularly! :shock:
Instead of talking to your plants, if you yelled at them would they still grow, but only to be troubled and insecure?
User avatar
bort
6 valves
6 valves
Posts: 11222
Joined: Wed Sep 22, 2004 11:08 pm
Location: Minneapolis, Minnesota

Re: A mouthpiece angular sweet spot... really?

Post by bort »

Unless it's asymmetrical, like a wedge or the parduba double cup (right?)
User avatar
Worth
3 valves
3 valves
Posts: 451
Joined: Sat Jan 19, 2013 7:44 am

Re: A mouthpiece angular sweet spot... really?

Post by Worth »

For most of us its Voodoo but some people are hung up on the whole Feng Shui of their setup I suppose.
2014 Wisemann 900 with Laskey 30H
~1980 Cerveny 4V CC Piggy
1935 Franz Schediwy BBb
1968 Conn 2J (thinking of selling)
User avatar
proam
bugler
bugler
Posts: 123
Joined: Wed Sep 23, 2015 8:19 pm

Re: A mouthpiece angular sweet spot... really?

Post by proam »

Some call it “clocking” the mouthpiece. Some believe that a mouthpiece has an optimal “clock position” within the receiver.

While I had some success as a trumpet player, I could never tell a difference myself. But some who believe in clocking their mouthpiece are much, much better players than I ever was so what do I know.

https://www.trumpetherald.com/forum/vie ... p?t=141951" target="_blank
Three Valves
6 valves
6 valves
Posts: 4230
Joined: Wed Jan 07, 2015 9:44 am
Location: With my fellow Thought Criminals

Re: A mouthpiece angular sweet spot... really?

Post by Three Valves »

Why not mark the piece and pipe to make sure it is consistently clocked correctly after the sweet spot is found?

Or does the sweet spot move?

Like the G-spot... 8)
I am committed to the advancement of civil rights, minus the Marxist intimidation and thuggery of BLM.
User avatar
proam
bugler
bugler
Posts: 123
Joined: Wed Sep 23, 2015 8:19 pm

Re: A mouthpiece angular sweet spot... really?

Post by proam »

They do mark it.
timothy42b
3 valves
3 valves
Posts: 466
Joined: Thu Sep 10, 2009 9:57 pm

Re: A mouthpiece angular sweet spot... really?

Post by timothy42b »

Yes, this is well known. As mentioned, it's called clocking.

Musicians are a superstitious lot.

The theory is that mouthpieces aren't perfectly manufactured, and inaccuracies may lead to an optimal position.

I don't buy it myself. But you must NEVER argue with true believers.

Yes, I've tried it. I've never been able to tell any difference. However, there is something to not varying from an established starting ritual.
WillDellinger
bugler
bugler
Posts: 62
Joined: Wed Oct 26, 2011 3:41 pm

Re: A mouthpiece angular sweet spot... really?

Post by WillDellinger »

I've heard of this before. It seems crazy, but it sure is fun to read about.

Somebody on trumpet herald thinks it could be due to the mix of copper and zinc not being uniform throughout the brass. Hopefully Joe's suppliers mix the chromium into the stainless really well :shock:
User avatar
windshieldbug
Once got the "hand" as a cue
Once got the "hand" as a cue
Posts: 11511
Joined: Tue Mar 01, 2005 4:41 pm
Location: 8vb

Re: A mouthpiece angular sweet spot... really?

Post by windshieldbug »

bloke wrote:Find the best spot, and put a nice file mark there so that you can easily find it again.

Then make sure it aligns with your Mohawk...

8)
Instead of talking to your plants, if you yelled at them would they still grow, but only to be troubled and insecure?
Three Valves
6 valves
6 valves
Posts: 4230
Joined: Wed Jan 07, 2015 9:44 am
Location: With my fellow Thought Criminals

Re: A mouthpiece angular sweet spot... really?

Post by Three Valves »

I had a steel nose ring. When I changed it to copper, my playing improved significantly, my hair stopped falling out and the lead was restored in my pencil. :shock:
I am committed to the advancement of civil rights, minus the Marxist intimidation and thuggery of BLM.
User avatar
Ken Crawford
4 valves
4 valves
Posts: 722
Joined: Sat Jun 23, 2012 10:45 am
Location: Rexburg, ID

Re: A mouthpiece angular sweet spot... really?

Post by Ken Crawford »

bloke wrote:Find the best spot, and put a nice file mark there so that you can easily find it again.
Making a file mark on the mouthpiece would change the whole thing. Use a permanent marker, but make sure to use a color that you want your sound to be like. One time I drew a red arrow on my mouthpiece pointing toward the lead pipe which helped to draw maximum projection out of my lips. If I want a dark sound I use a dark color, drawing circles on the outside of the mouthpiece, the size of which corresponding to the size I want my sound to be.
Oldschooltuba
bugler
bugler
Posts: 144
Joined: Thu Apr 20, 2017 9:37 pm

Re: A mouthpiece angular sweet spot... really?

Post by Oldschooltuba »

The sweet spot for me is mouthpiece on my face. Case closed
Eric Hunter
http://www.tubaforum.net/index.php" target="_blank
186CC 5U (gone)
Rudy Meinl 5/4 CC (gone)
Silver CC Piggy (gone)
Meinl Weston F Model 45 (Gone)
B&S 5/4 CC Prototype
Yamaha 822F
York 6/4 CC (yes a real York BAT)
User avatar
proam
bugler
bugler
Posts: 123
Joined: Wed Sep 23, 2015 8:19 pm

Re: A mouthpiece angular sweet spot... really?

Post by proam »

Ken Crawford wrote: Use a permanent marker, but make sure to use a color that you want your sound to be like.
Has to be green. :D

Does anyone else remember the early days of CDs when some advocated that using a green marker to make a line around the outside edge would significantly improve the playback audio quality?
User avatar
GC
5 valves
5 valves
Posts: 1800
Joined: Fri Mar 19, 2004 5:52 am
Location: Rome, GA (between Rosedale and Armuchee)

Re: A mouthpiece angular sweet spot... really?

Post by GC »

Oldschooltuba wrote:The sweet spot for me is mouthpiece on my face. Case closed
I use my forehead. That's were people tell me I sound best.
JP/Sterling 377 compensating Eb; Warburton "The Grail" T.G.4, RM-9 7.8, Yamaha 66D4; for sale > 1914 Conn Monster Eb (my avatar), ca. 1905 Fillmore Bros 1/4-size Eb, Bach 42B trombone
happyroman
3 valves
3 valves
Posts: 499
Joined: Tue Mar 30, 2004 12:12 pm
Location: Evanston, IL

Re: A mouthpiece angular sweet spot... really?

Post by happyroman »

Rex Martin told me about this years ago. The throat will be bored out at a very slight angle in each mouthpiece. There will very rarely (if ever) be perfectly straight through the shank. The idea is to make sure that slight imperfection is aligned a certain way (I don't remember how) and there will be a noticeable difference in how the mouthpiece plays and sounds.
Andy
Three Valves
6 valves
6 valves
Posts: 4230
Joined: Wed Jan 07, 2015 9:44 am
Location: With my fellow Thought Criminals

Re: A mouthpiece angular sweet spot... really?

Post by Three Valves »

I knew those Chinese were controlling the weather/climate!!
I am committed to the advancement of civil rights, minus the Marxist intimidation and thuggery of BLM.
User avatar
Art Hovey
pro musician
pro musician
Posts: 1506
Joined: Sun May 02, 2004 12:28 am
Location: Connecticut

Re: A mouthpiece angular sweet spot... really?

Post by Art Hovey »

Anybody remember the video of Vizzuti playing Carnival of Venice while "clocking" his trumpet 360 degrees?
He must have passed through his "sweet spot" in the process. Shall we listen closely to see which note it was on?
Drbuzzz
pro musician
pro musician
Posts: 82
Joined: Sun Mar 21, 2004 11:57 pm
Location: Hoover, AL
Contact:

Re: A mouthpiece angular sweet spot... really?

Post by Drbuzzz »

I wouldn't have believed it until I experienced it. I wouldn't call it a sweet spot as much as a timbre change and back pressure change. Therefore, certain pieces I like it in one spot, but for others, I need it spun elsewhere. For instance, in one position, the sound is brighter and the back pressure is low. Works great for very articulate pieces. Spun around (i.e. about 180 degrees), the sound is darker and the back pressure is more intense. Works great for very soft tonguing and soft slurs. I've noticed this phenomenon on every mouthpiece, on every horn. And the positions that work for one horn aren't the same positions for another horn. I don't know the science behind what's happening...don't care. As long as there's a change in sound (and feel), that's all that matters to me.

This was introduced to me at the Denver ITEC while I was watching Mickey Moore play the Yamayork. Wayne Tannabe was having him clock the mouthpiece. At first I called BS, but after I heard the difference (and it wasn't a "sweet spot", rather a difference), I couldn't wait to try it. So when I got to try the Yamayork, I did a little mouthpiece spin and was totally amazed. I was equally impressed with mouthpiece clocking as I was the Yamayork.
Andrew Miller
Alabama Symphony Orchestra
User avatar
windshieldbug
Once got the "hand" as a cue
Once got the "hand" as a cue
Posts: 11511
Joined: Tue Mar 01, 2005 4:41 pm
Location: 8vb

Re: A mouthpiece angular sweet spot... really?

Post by windshieldbug »

Just matters which angle the backbore was dropped on last... :shock: :D
Instead of talking to your plants, if you yelled at them would they still grow, but only to be troubled and insecure?
Post Reply