French C Tuba
- danontuba
- lurker
- Posts: 13
- Joined: Thu Jan 25, 2018 6:45 pm
- Location: Brazil
French C Tuba
In a few days, I will be receiving a French C tuba to add to the collection. The instrument, made by Wessex, is based on a good french instrument from 1931 owned by Carl Kleinsteuber. If anyone is interested in this instrument, I encourage you to read his dissertation and see the videos below.
As I have not received it, I was curious if anyone has had a chance to play one and also if anyone can share a fingering chart for this particular instrument from Wessex. (at least where it begins to differ from a normal C tuba)
https://digital.library.unt.edu/ark:/67 ... einsteuber
https://youtu.be/313HdaUj0iE
https://youtu.be/HGIux_7_baA
As I have not received it, I was curious if anyone has had a chance to play one and also if anyone can share a fingering chart for this particular instrument from Wessex. (at least where it begins to differ from a normal C tuba)
https://digital.library.unt.edu/ark:/67 ... einsteuber
https://youtu.be/313HdaUj0iE
https://youtu.be/HGIux_7_baA
-
- bugler
- Posts: 57
- Joined: Mon Oct 25, 2010 4:50 am
- Location: Macedonia
Re: French C Tuba
I found this which has some fingerings
https://simonettitubacollection.com/ins ... 6-pistons/" target="_blank
https://simonettitubacollection.com/ins ... 6-pistons/" target="_blank
_______________________________________________________
Conn 20j - Gudrun
York Eb Sousaphone - Ellie Mae
King K-90 - Bazookaphone
Červeny Bb helicon - Brandon
Ultratone P-R - Blatmobile
Eb tuba - Commander Riker
Conn 20j - Gudrun
York Eb Sousaphone - Ellie Mae
King K-90 - Bazookaphone
Červeny Bb helicon - Brandon
Ultratone P-R - Blatmobile
Eb tuba - Commander Riker
- J.c. Sherman
- 6 valves
- Posts: 2116
- Joined: Mon Apr 11, 2005 1:11 pm
- Location: Cleveland
- Contact:
Re: French C Tuba
Tried one... it was fantastic beyond my hopes!
Now to find the scratch!
J.c.S.
Now to find the scratch!
J.c.S.
Instructor of Tuba & Euphonium, Cleveland State University
Principal Tuba, Firelands Symphony Orchestra
President, Variations in Brass
http://www.jcsherman.net
Principal Tuba, Firelands Symphony Orchestra
President, Variations in Brass
http://www.jcsherman.net
- danontuba
- lurker
- Posts: 13
- Joined: Thu Jan 25, 2018 6:45 pm
- Location: Brazil
Re: French C Tuba
These fingerings are for the original valve configuration. The Wessex French C tuba gave it a more "modern" valve configuration to make things easier. So, it will be different. As soon as I figure it out with the tuba, I will post here.iattp wrote:I found this which has some fingerings
"Valves: 6 piston valves (regular lengths 1-4), flat tone 5th (adjustable to flat ½ tone), 6th valve puts down into F"
-
- Deletedaccounts
- Posts: 1567
- Joined: Fri Mar 19, 2004 1:07 am
Re: French C Tuba
Here's a fingering chart for the TC236 with a LONG (whole tone) 5th valve setup: http://s000.tinyupload.com/?file_id=847 ... 7560797191" target="_blank" target="_blank
And here's a fingering chart for the same instrument with a SHORT (half step) 5th valve setup: http://s000.tinyupload.com/?file_id=925 ... 8589571742" target="_blank" target="_blank
Hope this helps!
And here's a fingering chart for the same instrument with a SHORT (half step) 5th valve setup: http://s000.tinyupload.com/?file_id=925 ... 8589571742" target="_blank" target="_blank
Hope this helps!
- danontuba
- lurker
- Posts: 13
- Joined: Thu Jan 25, 2018 6:45 pm
- Location: Brazil
Re: French C Tuba
Perfect!!! Thank you, UncleBeer!!
- Snake Charmer
- bugler
- Posts: 145
- Joined: Thu Sep 07, 2017 5:34 am
- Location: Schifferstadt, Germany
Re: French C Tuba
And welcome to the CETPAFCTOC (Crazy-enough-to-play-a-french-c-tuba-owners-club)!
- Snake Charmer
- bugler
- Posts: 145
- Joined: Thu Sep 07, 2017 5:34 am
- Location: Schifferstadt, Germany
Re: French C Tuba
And for all members of this club I recommend the use of the ErgoBrass support. It is really difficult to hold these 4.5 kgs of compact plumbing without any finger left! It is not really cheap but worth every dime, you can find it on
http://www.ergobrass.com" target="_blank" target="_blank
The euphonium plate fits perfect onto the Wessex, and will fit most other models as well. With this you can enjoy a hovering horn...stressless!
http://www.ergobrass.com" target="_blank" target="_blank
The euphonium plate fits perfect onto the Wessex, and will fit most other models as well. With this you can enjoy a hovering horn...stressless!
You do not have the required permissions to view the files attached to this post.
- J.c. Sherman
- 6 valves
- Posts: 2116
- Joined: Mon Apr 11, 2005 1:11 pm
- Location: Cleveland
- Contact:
Re: French C Tuba
The 3rd can also be pulled to the traditional 2-tone pitch, as well as the 5th being able to be configured to the "Transpositeaur" (sp?).danontuba wrote:These fingerings are for the original valve configuration. The Wessex French C tuba gave it a more "modern" valve configuration to make things easier. So, it will be different. As soon as I figure it out with the tuba, I will post here.iattp wrote:I found this which has some fingerings
"Valves: 6 piston valves (regular lengths 1-4), flat tone 5th (adjustable to flat ½ tone), 6th valve puts down into F"
Instructor of Tuba & Euphonium, Cleveland State University
Principal Tuba, Firelands Symphony Orchestra
President, Variations in Brass
http://www.jcsherman.net
Principal Tuba, Firelands Symphony Orchestra
President, Variations in Brass
http://www.jcsherman.net
- binlove
- bugler
- Posts: 71
- Joined: Sun Feb 15, 2015 4:05 am
Re: French C Tuba
Is this link still working? I'm getting an error, and I'd really like to get these charts.UncleBeer wrote:Here's a fingering chart for the TC236 with a LONG (whole tone) 5th valve setup: http://s000.tinyupload.com/?file_id=847 ... 7560797191" target="_blank" target="_blank" target="_blank" target="_blank
And here's a fingering chart for the same instrument with a SHORT (half step) 5th valve setup: http://s000.tinyupload.com/?file_id=925 ... 8589571742" target="_blank" target="_blank" target="_blank" target="_blank
Hope this helps!
- bort
- 6 valves
- Posts: 11222
- Joined: Wed Sep 22, 2004 11:08 pm
- Location: Minneapolis, Minnesota
Re: French C Tuba
Works for me... PM me your email address and I'll send them to you.
- binlove
- bugler
- Posts: 71
- Joined: Sun Feb 15, 2015 4:05 am
Re: French C Tuba
bort wrote:Works for me... PM me your email address and I'll send them to you.
Thanks bort. Just sent it over.
- bort
- 6 valves
- Posts: 11222
- Joined: Wed Sep 22, 2004 11:08 pm
- Location: Minneapolis, Minnesota
Re: French C Tuba
Ditto!
-
- Deletedaccounts
- Posts: 1567
- Joined: Fri Mar 19, 2004 1:07 am
Re: French C Tuba
Links still works for me. Read the page though, as it produces a download link for the charts.binlove wrote: Is this link still working? I'm getting an error, and I'd really like to get these charts.
-
- bugler
- Posts: 88
- Joined: Sat Apr 22, 2017 5:18 am
Re: French C Tuba
Have anyone found decent mutes for these ones?
Ola
Ola
-
- 6 valves
- Posts: 2632
- Joined: Sun Jul 19, 2009 1:57 pm
- Location: Chicago
Re: French C Tuba
I'd be interested in a comparison video between one of these and a euph with the same size mp, if anyone's up for it...
- Snake Charmer
- bugler
- Posts: 145
- Joined: Thu Sep 07, 2017 5:34 am
- Location: Schifferstadt, Germany
Re: French C Tuba
Having a french tuba I sold my euph long ago, so no chance!
#J.c.S: The idea of the "transpositeur" is: just press number five an play a half step lower in strange keys without awkward fingerings. Unfortunately the most original music for this horn has a lot of sharps written, so you have to think. For me it is easier to finger the right key and have the lowered half-step on five for in-tune combinations with 4 and 6, in quick combinations sometimes with 3 or 12. Yes, and I pulled out my third slide so that I have no difference between my old and new horn.
Brand new on air:
https://youtu.be/sljgjXNUo9Y" target="_blank" target="_blank" target="_blank
The proper fingering chart for tradional layout, just forget all combinations with more than 3 valves over CC (as shown in every chart...)
For my little tuba I have a nice mute from Schlipf (http://www.tuba-mute.com" target="_blank" target="_blank" target="_blank), it was a prototype he had made for some saxhorn. He was glad to get some money for it and it works great on my Courtois and on my Wessex. It is the Mnozil model, which can be adjusted for playing or as a practice mute and can be transported in the bell. When asked he may produce some more of it.
#J.c.S: The idea of the "transpositeur" is: just press number five an play a half step lower in strange keys without awkward fingerings. Unfortunately the most original music for this horn has a lot of sharps written, so you have to think. For me it is easier to finger the right key and have the lowered half-step on five for in-tune combinations with 4 and 6, in quick combinations sometimes with 3 or 12. Yes, and I pulled out my third slide so that I have no difference between my old and new horn.
Brand new on air:
https://youtu.be/sljgjXNUo9Y" target="_blank" target="_blank" target="_blank
The proper fingering chart for tradional layout, just forget all combinations with more than 3 valves over CC (as shown in every chart...)
For my little tuba I have a nice mute from Schlipf (http://www.tuba-mute.com" target="_blank" target="_blank" target="_blank), it was a prototype he had made for some saxhorn. He was glad to get some money for it and it works great on my Courtois and on my Wessex. It is the Mnozil model, which can be adjusted for playing or as a practice mute and can be transported in the bell. When asked he may produce some more of it.
- joshealejo
- 3 valves
- Posts: 322
- Joined: Wed Feb 20, 2013 12:11 am
- Location: Lima-Peru
- Contact:
Re: French C Tuba
Greetings Mr. Helmut,Snake Charmer wrote:Having a french tuba I sold my euph long ago, so no chance!
#J.c.S: The idea of the "transpositeur" is: just press number five an play a half step lower in strange keys without awkward fingerings. Unfortunately the most original music for this horn has a lot of sharps written, so you have to think. For me it is easier to finger the right key and have the lowered half-step on five for in-tune combinations with 4 and 6, in quick combinations sometimes with 3 or 12. Yes, and I pulled out my third slide so that I have no difference between my old and new horn.
Brand new on air:
https://youtu.be/sljgjXNUo9Y" target="_blank" target="_blank" target="_blank" target="_blank" target="_blank" target="_blank
The proper fingering chart for tradional layout, just forget all combinations with more than 3 valves over CC (as shown in every chart...)
For my little tuba I have a nice mute from Schlipf (http://www.tuba-mute.com" target="_blank" target="_blank" target="_blank" target="_blank" target="_blank" target="_blank), it was a prototype he had made for some saxhorn. He was glad to get some money for it and it works great on my Courtois and on my Wessex. It is the Mnozil model, which can be adjusted for playing or as a practice mute and can be transported in the bell. When asked he may produce some more of it.
Thang you for the Fingering chart! Is almost the same what I use with my Courtois. But I wanted to ask you about your Courtois, as yours looks to bee older and the tubing seems to be a little bit fatter than mine one. Have you ever tryed the newer (yet old) model? Do you still have your Courtois?
Here is mine one!
Thank you so much, Sir!
Jose
Some stuff
- Snake Charmer
- bugler
- Posts: 145
- Joined: Thu Sep 07, 2017 5:34 am
- Location: Schifferstadt, Germany
Re: French C Tuba
Ola Jose,
unfortunately I never had a chance to try a newer Courtois (or any other brand). I was on the hunt for two years to get mine (#650) and as I found out it is a real one-off. It was made in 1940 under the german occupation for the front theater in Lille (northern France), for being played by french musicians for the german troops. Maybe the body of the instrument is older than 1940, at least it looks similar to #553 of the Utah Orchestra (1923) and the picture in the Watelle Method (1913), but the extraordinaire thing is the left hand valve cluster, which is identical to the right hand. I think there were no proper parts available in the nearly-closed factory back then... It has also the short mouthpipe with the main tuning slide after the valves. And yes. I still have it, you get a glimpse of it over my right shoulder in the video (when you know it!). I was looking for a 168, but when Wessex offered the new one I couldn't resist!
Cheers, Helmut
unfortunately I never had a chance to try a newer Courtois (or any other brand). I was on the hunt for two years to get mine (#650) and as I found out it is a real one-off. It was made in 1940 under the german occupation for the front theater in Lille (northern France), for being played by french musicians for the german troops. Maybe the body of the instrument is older than 1940, at least it looks similar to #553 of the Utah Orchestra (1923) and the picture in the Watelle Method (1913), but the extraordinaire thing is the left hand valve cluster, which is identical to the right hand. I think there were no proper parts available in the nearly-closed factory back then... It has also the short mouthpipe with the main tuning slide after the valves. And yes. I still have it, you get a glimpse of it over my right shoulder in the video (when you know it!). I was looking for a 168, but when Wessex offered the new one I couldn't resist!
Cheers, Helmut
- joshealejo
- 3 valves
- Posts: 322
- Joined: Wed Feb 20, 2013 12:11 am
- Location: Lima-Peru
- Contact:
Re: French C Tuba
Yes It seems to be completly horizontal, same as the 1-2-3 valve cluster. Very simillar to the one that Mr. Ofenloch have, yet different as you stated. I like much more "tuba-euphonium" shape It does have! May I ask what mouthpiece you use with It? I use a Loud LM27 and planning to get a Roger Bobo Tenor tuba and cut the shank, same as Mr. Kleinsteuber does. I have tryed to contact Wessex to see if they can sell the mouthpiece that comes with their french tuba with a shank turned down but with no succes, sadly.
Here are a couple of french tubas for sale in France for interested people.
Courtois 168
https://www.leboncoin.fr/instruments_de ... 16261.htm/" target="_blank" target="_blank
Couesnon
https://www.leboncoin.fr/instruments_de ... 40298.htm/" target="_blank" target="_blank
Note that the Couesnon seems to have a little more wide bottom bow too.
Jose
Here are a couple of french tubas for sale in France for interested people.
Courtois 168
https://www.leboncoin.fr/instruments_de ... 16261.htm/" target="_blank" target="_blank
Couesnon
https://www.leboncoin.fr/instruments_de ... 40298.htm/" target="_blank" target="_blank
Note that the Couesnon seems to have a little more wide bottom bow too.
Jose
Some stuff