163 CC Alexander with 3+2 valve set up

The bulk of the musical talk
Post Reply
ssbolas
bugler
bugler
Posts: 43
Joined: Wed May 09, 2018 9:26 pm

163 CC Alexander with 3+2 valve set up

Post by ssbolas »

Saw an interesting picture of an Alexander 163 with a valve set up that I have not seen before. Most CCs are 4+1 piston or 5 rotor with the 5th being with right thumb. Has anyone ever played a Alexander with the 3+2 set up?
Last edited by ssbolas on Wed Dec 05, 2018 5:08 pm, edited 1 time in total.
Frankentuba by Tabor
Former Navy Musician
Middle School Band Director
Spotsylvania, VA
User avatar
bort
6 valves
6 valves
Posts: 11222
Joined: Wed Sep 22, 2004 11:08 pm
Location: Minneapolis, Minnesota

Re: 163 CC Rudy with 3+2 valve set up

Post by bort »

Did you mean an Alexander 163?

Can you share the picture?
ssbolas
bugler
bugler
Posts: 43
Joined: Wed May 09, 2018 9:26 pm

Re: 163 CC Rudy with 3+2 valve set up

Post by ssbolas »

You are right, it is an Alexander.
Frankentuba by Tabor
Former Navy Musician
Middle School Band Director
Spotsylvania, VA
ssbolas
bugler
bugler
Posts: 43
Joined: Wed May 09, 2018 9:26 pm

Re: 163 CC Alexander with 3+2 valve set up

Post by ssbolas »

Frankentuba by Tabor
Former Navy Musician
Middle School Band Director
Spotsylvania, VA
Mark Horne
bugler
bugler
Posts: 203
Joined: Fri Apr 10, 2009 11:59 pm
Location: Texas Hill Country

Re: 163 CC Alexander with 3+2 valve set up

Post by Mark Horne »

This particular horn has a very odd set up with a conventional right hand 1,2,3. LH1 looks to be a normal 4th (1-3 combo). LH2 looks to be a long half step which would preclude playing a low Db with all 5 down.

I have an old Alexander 156 F that is a 3+3 - the valve set up is the same, except that LH3 is the long whole step enabling all the chromatic notes plus an alternate pedal F with all 6 down. Having the typical 4th valve in the left hand takes some getting used to. It also practically guarantees that you will not be able to move slides when playing in the low range.
Alexander 163 CC 5V, MW Thor, Mel Culbertson Neptune, B&S Symphonie F 6V
TheBerlinerTuba
3 valves
3 valves
Posts: 307
Joined: Tue Jun 01, 2004 6:45 pm

Re: 163 CC Alexander with 3+2 valve set up

Post by TheBerlinerTuba »

Hello ssbolas,

I believe the photos are from an Alexander 163 CC that was recently sold at an auction in France.
The setup with 3 valves RH and 2 valves LH are meant to emulate the same system used on Saxhorns in France. I have seen Alexanders in both CC and F, Hirsbrunners in CC and F and the occasional B&S F using this system. Usually the valves are tuned:
RH 1 = one whole tone
RH 2 = one half tone
RH 3 = either 1 1/2 or 2 tones
LH 4 = either a quart valve or a long whole tone
LH 5 = either a quint valve or a long half tone

Regards,
TheBerlinerTuba
User avatar
oedipoes
4 valves
4 valves
Posts: 765
Joined: Wed Mar 26, 2008 3:47 pm
Location: Belgium

Re: 163 CC Alexander with 3+2 valve set up

Post by oedipoes »

Indeed, probably made for the French or Belgian market.
I have played one, and know of 2 other Rudi 4/4CC's with the same (3+2 rotary) valve configuration in Belgium. 3rd is 2 whole tones and 5th a long half tone.
They were probably ordered to replace older Mahillon or Persy or some French brand CC tubas with 3+2 pistons in the same configuration.
Last edited by oedipoes on Thu Dec 06, 2018 3:21 pm, edited 1 time in total.
User avatar
bort
6 valves
6 valves
Posts: 11222
Joined: Wed Sep 22, 2004 11:08 pm
Location: Minneapolis, Minnesota

Re: 163 CC Alexander with 3+2 valve set up

Post by bort »

Didn't Thein used to make a 3 + 2 piston BBb?
User avatar
oedipoes
4 valves
4 valves
Posts: 765
Joined: Wed Mar 26, 2008 3:47 pm
Location: Belgium

Re: 163 CC Alexander with 3+2 valve set up

Post by oedipoes »

bort wrote:Didn't Thein used to make a 3 + 2 piston BBb?
Don't know, but Rudi did... it was discussed here: viewtopic.php?f=2&t=24944&start=20
The original pictures got lost on Tubenet, but I found them on my PC:
rudy piston 2.jpeg
rudy piston.jpeg
You do not have the required permissions to view the files attached to this post.
User avatar
bort
6 valves
6 valves
Posts: 11222
Joined: Wed Sep 22, 2004 11:08 pm
Location: Minneapolis, Minnesota

Re: 163 CC Alexander with 3+2 valve set up

Post by bort »

My mistake, it's in Eb:

https://thein-blechblasinstrumente.de/0 ... ba-5pv.php" target="_blank
User avatar
oedipoes
4 valves
4 valves
Posts: 765
Joined: Wed Mar 26, 2008 3:47 pm
Location: Belgium

Re: 163 CC Alexander with 3+2 valve set up

Post by oedipoes »

And this is a Hirsbrunner in 3+2 configuration (was also sold some time ago in France)
You do not have the required permissions to view the files attached to this post.
Post Reply