Hello!
Looking for ANY Kanstul tuba rotor valve and casing. Hopefully someone has one lying around somewhere or knows someone that has one lying around somewhere.
It doesn’t matter when or what size. Any Kanstul tuba rotor will do.
Thanks!!
Norm
Found!
-
- TubeNet Sponsor
- Posts: 64
- Joined: Thu Mar 04, 2010 9:33 pm
- Location: Louisville, KY
- Contact:
Found!
Last edited by 11annienorm on Thu Apr 15, 2021 11:06 pm, edited 3 times in total.
Norman Epley
Instrument Repair Tech
Owner: NRE Brassworks LLC
Instrument Repair Tech
Owner: NRE Brassworks LLC
-
- bugler
- Posts: 180
- Joined: Sun Sep 06, 2020 3:43 pm
Re: Looking for a Kanstul tuba rotor
Knowing the bore size would help. Do you want the early rotor style or the later "CR" style.
-
- TubeNet Sponsor
- Posts: 64
- Joined: Thu Mar 04, 2010 9:33 pm
- Location: Louisville, KY
- Contact:
Re: Looking for a Kanstul tuba rotor
It’s on the Model 80 F tuba. I can get you measurements very soon.
What’s an email for you and I can send pictures also.
Your help would be greatly appreciated.
Norm
What’s an email for you and I can send pictures also.
Your help would be greatly appreciated.
Norm
Norman Epley
Instrument Repair Tech
Owner: NRE Brassworks LLC
Instrument Repair Tech
Owner: NRE Brassworks LLC
-
- TubeNet Sponsor
- Posts: 64
- Joined: Thu Mar 04, 2010 9:33 pm
- Location: Louisville, KY
- Contact:
Re: Looking for a Kanstul tuba rotor
Bore is .725
Norman Epley
Instrument Repair Tech
Owner: NRE Brassworks LLC
Instrument Repair Tech
Owner: NRE Brassworks LLC
-
- bugler
- Posts: 180
- Joined: Sun Sep 06, 2020 3:43 pm
Re: Looking for a Kanstul tuba rotor
I don't have one. I was pointing out that you left out some pretty crucial information if you want help locating one of these. Just trying to help. There are several valves in different sizes.
Good luck!
Good luck!
-
- TubeNet Sponsor
- Posts: 64
- Joined: Thu Mar 04, 2010 9:33 pm
- Location: Louisville, KY
- Contact:
Re: Looking for ANY Kanstul tuba rotor
Thanks for the input. I should have been more clear.
I’m looking for any Kanstul tuba rotor.
Any style or size would be great. I can make just about anything fit with the project I have going on, but it just has to be a Kanstul rotor and casing.
I’m looking for any Kanstul tuba rotor.
Any style or size would be great. I can make just about anything fit with the project I have going on, but it just has to be a Kanstul rotor and casing.
Norman Epley
Instrument Repair Tech
Owner: NRE Brassworks LLC
Instrument Repair Tech
Owner: NRE Brassworks LLC
-
- bugler
- Posts: 130
- Joined: Wed Feb 26, 2020 11:30 am
- Location: North Indiana
Re: Looking for ANY Kanstul tuba rotor
What kinda project?11annienorm wrote: ↑Sat Apr 03, 2021 9:04 am Thanks for the input. I should have been more clear.
I’m looking for any Kanstul tuba rotor.
Any style or size would be great. I can make just about anything fit with the project I have going on, but it just has to be a Kanstul rotor and casing.
B&S PT-7PS
Yamaha Yeb-321
Yamaha Yeb-321
-
- TubeNet Sponsor
- Posts: 64
- Joined: Thu Mar 04, 2010 9:33 pm
- Location: Louisville, KY
- Contact:
Re: Found!
Restoration project. I’ll post on my page once I get the valves back from the platers.
Norman Epley
Instrument Repair Tech
Owner: NRE Brassworks LLC
Instrument Repair Tech
Owner: NRE Brassworks LLC