Tuba Stands and Storage
- kegmcnabb
- 3 valves

- Posts: 432
- Joined: Fri Jun 25, 2004 10:33 pm
- Location: Moving back to WI from NM! What am I thinking?
Tuba Stands and Storage
OK, guys, how do you all store your herd? Especially those of you with multiple horns and styles (uprights, recording bells, sousamaphones).
Do you always put them in cases? Best protection from kids, dogs, hurricanes and the like, but cases take up a lot of room.
Stood on bell in a corner or against the wall?
In tuba stands? Are these secure or do they add dents with whatever grabbing mechanism they have?
On shelves? On bell or prone?
Wall hangers?
Do you always put them in cases? Best protection from kids, dogs, hurricanes and the like, but cases take up a lot of room.
Stood on bell in a corner or against the wall?
In tuba stands? Are these secure or do they add dents with whatever grabbing mechanism they have?
On shelves? On bell or prone?
Wall hangers?
Last edited by kegmcnabb on Fri Oct 07, 2005 10:18 pm, edited 4 times in total.
- sc_curtis
- pro musician

- Posts: 597
- Joined: Sun Sep 18, 2005 11:47 pm
- Location: Houston, TX
- Contact:
Storage
I currently have two, 1 CC and 1 F. Both are laid down on the spare bed in the spare bedroom, which is also where I practice. This room is the only cat-free zone we have, so I also keep my gig bags and formal wear in there as well as all of my musically-related items and anything else I want to keep cat hair off of.
- Paul S
- 3 valves

- Posts: 397
- Joined: Fri Mar 19, 2004 12:12 am
- Location: St Marys, Ohio
- Contact:
I was always taught and fully believe that when you value your horn there are only two places for your tuba to ever be...
........in your hands or in its hard case.
........in your hands or in its hard case.
Paul Sidey, CCM '84
Principal Tubist, Grand Lake Symphony
B&S PT-606 CC - Yamaha YFB-621 F
SSH Mouthpieces http://sshmouthpieces.com/" target="_blank
Principal Tubist, Grand Lake Symphony
B&S PT-606 CC - Yamaha YFB-621 F
SSH Mouthpieces http://sshmouthpieces.com/" target="_blank
-
tubatooter1940
- 6 valves

- Posts: 2530
- Joined: Mon Mar 22, 2004 11:09 pm
- Location: alabama gulf coast
I have no case but my music room is a cat-free,kid-free place where my Eb dwells on it's stand ready to toot at a moment's notice.
Paul S is correct about cases and I am looking for one for my bell-front King. Traveling is worrisome but so far I have padded the horn and had no dents except for that gig at the yacht club where that cute waitress asked to play it because she missed her tuba from high school. I told her she could have a toot when we took a break. As we headed for the bathroom ,I saw her walking toward the bandstand. While in the bathroom,we heard a bump and a loud scream. We came out to find my tuba and stand over on it's side and the waitress crying inconsolably. My horn had a crease on one side of the bell that popped right out by hand.
I told her the tuba was O.K. and no stranger to dents but she cried even louder. She couldn't leave because she was working so she stayed at her station and cried nonstop. We tried teasing her mercilessly over the P.A. system but that really turned the waterworks on. We felt badly for her and she was so cute.
Paul S is correct about cases and I am looking for one for my bell-front King. Traveling is worrisome but so far I have padded the horn and had no dents except for that gig at the yacht club where that cute waitress asked to play it because she missed her tuba from high school. I told her she could have a toot when we took a break. As we headed for the bathroom ,I saw her walking toward the bandstand. While in the bathroom,we heard a bump and a loud scream. We came out to find my tuba and stand over on it's side and the waitress crying inconsolably. My horn had a crease on one side of the bell that popped right out by hand.
I told her the tuba was O.K. and no stranger to dents but she cried even louder. She couldn't leave because she was working so she stayed at her station and cried nonstop. We tried teasing her mercilessly over the P.A. system but that really turned the waterworks on. We felt badly for her and she was so cute.
- kegmcnabb
- 3 valves

- Posts: 432
- Joined: Fri Jun 25, 2004 10:33 pm
- Location: Moving back to WI from NM! What am I thinking?
Stands...
Yeah, I agree! Unfortunately, not all tubas come with cases and with older models they can be nearly impossible to accomodate.I was always taught and fully believe that when you value your horn there are only two places for your tuba to ever be...
........in your hands or in its hard case.
As several of you use stands can you tell me if they are gentle on your horn.
My Reynolds Eb (no case) came with a Wenger Tuba Tamer (which I don't use - anybody wanna buy one?) but I think that the only significant dent on the horn came from the bottom "hand" of the stand. The person who initially owned the horn used the Tamer but I figure taking the horn in and out of the stand is when the dents occurred. Are the newer stands better designed and gentler on our "babies"?
Also, which stands do you recomend?
Thanks
- windshieldbug
- Once got the "hand" as a cue

- Posts: 11516
- Joined: Tue Mar 01, 2005 4:41 pm
- Location: 8vb
- SplatterTone
- 5 valves

- Posts: 1906
- Joined: Fri Jul 15, 2005 11:17 pm
- Location: Tulsa, OK
- Contact:
Maestro Joe Solti here.wall hangers are for conductors
For everything up to the 3/4 tuba, I hang 'em on the wall on String Swing guitar hangers. The 4/4 tuba stands on its bell next to where I practice; a towell is wrapped around the bell and another draped over the bow. It's true I don't store it in its case. But that's OK ... It's a Chinese tuba.
Good signature lines: http://tinyurl.com/a47spm
- Tubaryan12
- 6 valves

- Posts: 2106
- Joined: Sat Nov 13, 2004 7:49 am
When my horn is not in the bag I use a Wenger Tuba Tamer. It's safely held and in perfect position if I want to play it and it's perfect because I can leave my Silent Brass installed until I have to go to practice so its the most convenient solution for me.
kegmcnabb: If I ever buy another horn I'll be giving you a call on the tamer
kegmcnabb: If I ever buy another horn I'll be giving you a call on the tamer
- Lew
- 5 valves

- Posts: 1700
- Joined: Fri Mar 19, 2004 4:57 pm
- Location: Annville, PA
Stands for some, and I need to find a "tuba tamer" for the rotary valve King because it's too big for any of the new stands that I have found. Here's what the practice room looks like:

The King 2341 and Besson 983 are in their gig bags when not in use. I only use their hards cases when traveling any distance. The cases are just too heavy to lug around for every day use.

The King 2341 and Besson 983 are in their gig bags when not in use. I only use their hards cases when traveling any distance. The cases are just too heavy to lug around for every day use.
Besson 983
Henry Distin 1897 BBb tuba
Henry Distin 1898 BBb Helicon
Eastman EBB226
Henry Distin 1897 BBb tuba
Henry Distin 1898 BBb Helicon
Eastman EBB226
- Tubaryan12
- 6 valves

- Posts: 2106
- Joined: Sat Nov 13, 2004 7:49 am
- SplatterTone
- 5 valves

- Posts: 1906
- Joined: Fri Jul 15, 2005 11:17 pm
- Location: Tulsa, OK
- Contact:
I forgot to add that hanging them on the wall nicely compliments the display of your hub cap collection. It truly adds class, dignity, and character to your living room.
Good signature lines: http://tinyurl.com/a47spm
- Z-Tuba Dude
- 5 valves

- Posts: 1329
- Joined: Fri Mar 19, 2004 7:08 am
- Location: Lurking in the shadows of NYC!
- Rick Denney
- Resident Genius
- Posts: 6650
- Joined: Mon Mar 22, 2004 1:18 am
- Contact:
Holton on bell.
B&S on bell.
Yamaha in case.
Miraphone on bell (because it's gig bag is shared with the B&S, which leaves the house frequently).
York Master in gig bag.
Conn 14K leaning against window.
Conn 48H on stand.
Olds trombone in case.
Besson euphonium in case.
Instruments in cases tend not to get practiced. I find that taking the instrument out of the case is the hardest step in practicing.
But my horns resting on bells do so on carpet, and leaning against a wall. And no kids. When kids visit, they all go in cases.
I have an old K&M display stand, but I find the instrument takes up more room space when I use it, and it's sized for a Miraphone and not quite up to snuff for the Holton.
Rick "who couldn't narrow it down enough to vote" Denney
B&S on bell.
Yamaha in case.
Miraphone on bell (because it's gig bag is shared with the B&S, which leaves the house frequently).
York Master in gig bag.
Conn 14K leaning against window.
Conn 48H on stand.
Olds trombone in case.
Besson euphonium in case.
Instruments in cases tend not to get practiced. I find that taking the instrument out of the case is the hardest step in practicing.
But my horns resting on bells do so on carpet, and leaning against a wall. And no kids. When kids visit, they all go in cases.
I have an old K&M display stand, but I find the instrument takes up more room space when I use it, and it's sized for a Miraphone and not quite up to snuff for the Holton.
Rick "who couldn't narrow it down enough to vote" Denney
-
TubaRay
- 6 valves

- Posts: 4109
- Joined: Mon Mar 22, 2004 4:24 pm
- Location: San Antonio, Texas
- Contact:
This I tell my students all the time. It's true, isn't it?Rick Denney wrote:Holton on bell.
Instruments in cases tend not to get practiced. I find that taking the instrument out of the case is the hardest step in practicing.
Rick "who couldn't narrow it down enough to vote" Denney
Ray Grim
The TubaMeisters
San Antonio, Tx.
The TubaMeisters
San Antonio, Tx.
- SplatterTone
- 5 valves

- Posts: 1906
- Joined: Fri Jul 15, 2005 11:17 pm
- Location: Tulsa, OK
- Contact:
This is what I use. I hang the euphonia, alto horn, and 3/4 tuba on them. The 4/4 hangs fine on it too, but I'm out of wall space in my little private hidey hole room, which has other junk in it, so the 4/4 sits on the floor (as does the bourbon bottle).anyone know a place that sells wall hangers for a 4/4 tubas?
http://www.stringswing.com/
I use the guitar hanger shown in the picture. I think it is what they list as their model CC01. It is well padded and has those rubber washer-like things that add a little extra holding security. Places like Musicians Friend, Sam Ash, etc. have them. They are commonly found in local music stores too. I mount them stoutly, using longer screws and making sure the screws are in the wall studs.
Good signature lines: http://tinyurl.com/a47spm
- kegmcnabb
- 3 valves

- Posts: 432
- Joined: Fri Jun 25, 2004 10:33 pm
- Location: Moving back to WI from NM! What am I thinking?
Amen, brotherTubaRay wrote:This I tell my students all the time. It's true, isn't it?Rick Denney wrote:Holton on bell.
Instruments in cases tend not to get practiced. I find that taking the instrument out of the case is the hardest step in practicing.
Rick "who couldn't narrow it down enough to vote" Denney
- kegmcnabb
- 3 valves

- Posts: 432
- Joined: Fri Jun 25, 2004 10:33 pm
- Location: Moving back to WI from NM! What am I thinking?
- SplatterTone
- 5 valves

- Posts: 1906
- Joined: Fri Jul 15, 2005 11:17 pm
- Location: Tulsa, OK
- Contact:
Now, the guitars go in the cases, DEFINITELY NOT on the wall.Boy, I sure can't figure out how you use a guitar hanger to hang a tuba.
Good signature lines: http://tinyurl.com/a47spm
- ThomasDodd
- 5 valves

- Posts: 1161
- Joined: Tue Mar 23, 2004 11:37 am
- Location: BFE, Mississippi

