Wow--you don't see horns like those everyday! I love the authenticity of the s linkages on the valves. I have them on my Piggy as original equipment. They work great, and I have never been a fan of replacing them.
Both of those horns in the picture look like they have avoided major damage, too. Really cool!
Any fans of smaller tubas out there?
-
Tom Coffey
- 3 valves

- Posts: 389
- Joined: Wed Sep 15, 2010 11:40 pm
- Location: Cleveland
- proam
- bugler

- Posts: 123
- Joined: Wed Sep 23, 2015 8:19 pm
Re: Any fans of smaller tubas out there?
I am not sure how tubas are divided into 3/4, 7/8, 15/16, 4/4 etc. Weight? Height? Bore? Combination? Consensus opinion? Arbitrary?
I assume "smaller tuba" means less than 4/4? (The 15/16 is meant humorously, though I'm not positive that there isn't such a critter.)
Or is this one of those questions you don't ask ... you either know it intuitively or you just don't get it?
I have a Conn 5J and would guess it is a 4/4 but it might be 3/4? It has an 18" bell and stands about 36" high, I believe.
I assume "smaller tuba" means less than 4/4? (The 15/16 is meant humorously, though I'm not positive that there isn't such a critter.)
Or is this one of those questions you don't ask ... you either know it intuitively or you just don't get it?
I have a Conn 5J and would guess it is a 4/4 but it might be 3/4? It has an 18" bell and stands about 36" high, I believe.
- bigtubby
- 4 valves

- Posts: 747
- Joined: Mon Jan 07, 2013 9:43 pm
- Location: Ohio
Re: Any fans of smaller tubas out there?
I love both of these and RE: Tuben below feel fortunate to own them.Tom Coffey wrote:Wow--you don't see horns like those everyday! I love the authenticity of the s linkages on the valves. I have them on my Piggy as original equipment. They work great, and I have never been a fan of replacing them.
Both of those horns in the picture look like they have avoided major damage, too. Really cool!
The Schuster is all original excepting:
1. The cap was missing from the screw holding the 4th valve's stop arm. I purchased an appropriate period five pfennig piece on ebay, counterbored it and soldered it on.
2. The 4th valve slide is something that I fabricated. The original matches the 3rd slide in length and makes the 4th valve 2+3. Being used to 1+3 4th valve, this slide works better even though it looks a bit weird.
The Cerveny seems unusually near mint except:
1. I think that the 2nd valve slide is not original (they usually had the "thermometer bulb" slide and the color looks wrong.
2, The MTS has a curly queue that I think was added to drop it to modern pitch.
Given that I know of only one other functional BBb Cerveny tornister I can live with those unoriginal bits, especially since it is quite playable.
American sailboats, airplanes, banjos, guitars and flutes ...
Italian motorcycles and cars ...
German cameras and tubas ...
Life is Good.
Italian motorcycles and cars ...
German cameras and tubas ...
Life is Good.
-
Three Valves
- 6 valves

- Posts: 4230
- Joined: Wed Jan 07, 2015 9:44 am
- Location: With my fellow Thought Criminals
Re: Any fans of smaller tubas out there?
Loving the 3/4 tuba.
How much tuba does one need to get their lip back and play the second part at Tuba Christmas??

How much tuba does one need to get their lip back and play the second part at Tuba Christmas??
I am committed to the advancement of civil rights, minus the Marxist intimidation and thuggery of BLM.
-
Tom Coffey
- 3 valves

- Posts: 389
- Joined: Wed Sep 15, 2010 11:40 pm
- Location: Cleveland
Re: Any fans of smaller tubas out there?
The Schuster and the Cerveny have that old-world mojo phenomenon happening, in multiples! There is something reassuring about history being carried forward in a living way like this. Congratulations on finding and maintaining those horns!