Alexander tuba at BBC

The bulk of the musical talk
Post Reply
Ace
5 valves
5 valves
Posts: 1395
Joined: Fri Mar 19, 2004 12:46 am
Location: Berkeley, CA

Alexander tuba at BBC

Post by Ace »

Check out the six valve (4+2) Alexander CC tuba at Baltimore Brass Company. I've never heard of a six valve CC. Are there others in tuba history?

http://www.baltimorebrass.net/pic.php?id=232
User avatar
MartyNeilan
6 valves
6 valves
Posts: 4876
Joined: Fri Mar 19, 2004 3:06 am
Location: Practicing counting rests.

Post by MartyNeilan »

I think a new 6 valve Alex CC was sold within the last year through LowBrassWerks / Hornguys.com
Adjunct Instructor, Trevecca Nazarene University
Ted Cox
pro musician
pro musician
Posts: 130
Joined: Tue Mar 30, 2004 9:38 am
Location: Oklahoma City
Contact:

Post by Ted Cox »

My one and only C tuba is an Alexander, which I play on in the Oklahoma City Philharmonic. It was made in 1964 and back then, it cost $450, hard case and mouthpiece included which I still have. The lead pipe on Alex's are long and when you ordered a horn, you could add a fifth valve and a sixth valve for only $45 per valve and choose which length valve you wanted. My horn has a fifth valve which is a 3/4 step valve, or a very flat half step. This may seem odd, but it works perfectly for Db and Gb below the staff, using 4 and 5. The only other notes I use it for is sometimes low E and always for low Eb and D. I have to use a false tone for low Db, 2 and 3.
My horn is unusual in that it is made entirely out of solid nickel-silver. According to Anton Alexander, only 5 or 6 of these tubas were ever made. I've only ever seen two others. Although a little slower in response than the brass Alex's, you can push it very hard and the sound won't distort at all and it projects really well. Once upon a time, Alex's use to be the horn to play. Dave Kirk once described playing an Alex to me as a "journey in sound". He couldn't have been more right.
Most tubists don't want to take the time to learn how to play an Alex, but it really is a great journey.
Mark E. Chachich
3 valves
3 valves
Posts: 481
Joined: Thu Mar 25, 2004 6:07 pm
Location: Maryland

Post by Mark E. Chachich »

I tried the 6 valve Alexander at the Baltimore Brass Company. My opinions are as follows.

Overall: This is one of the best Alexanders that I have tried. I would go so far as to say that it is one of the best tubas that I have tried.
Sound: typical Alexander: big, rich, dark German sound etc...
Intonation: good, if you have a good ear you should be able to play this tuba in tune. I had no problem with intonation.
projection: it will project (Alexanders generally do this well), and it can also be played softly and gently
feel: this tuba has an open feel, but has enough back pressure to get feedback from the horn. Some Alexanders feel too open to me, I like a bit of back pressure.
response: All ranges and dynamics were even when I played this tuba.

My opinion is, if someone is looking for an Alexander 163 CC (or just an excellent CC tuba) this one is worth trying.

best,
Mark

P.S.
I have played an Alexander 163 for 31 years and have tried several. Also, I admit that the Alexander 163 CC is the tuba that I like the most and have played most of my jobs on.

Mark
Mark E. Chachich, Ph.D.
Principal Tuba, Bel Air Community Band
Life Member, Musicians' Association of Metropolitan Baltimore, A.F.M., Local 40-543
Life Member, ITEA
Post Reply