Green spots on raw brass

The bulk of the musical talk
Post Reply
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Green spots on raw brass

Post by Wyvern »

What causes green spots to appear on raw brass tubas?

I have been told that playing the tuba out in the rain will cause them - is that true?

I have an old Hermann Haag (Swiss) raw brass Eb and just wonder what I should do to stop the dreaded green spots appearing.

Thanks.
tubeast
4 valves
4 valves
Posts: 819
Joined: Thu Feb 17, 2005 3:59 pm
Location: Buers, Austria

Post by tubeast »

Hey Jonathan,

that green stuff must be some product of oxidization in combination with contact to organic material (such as skin).
On days of hard playing, this will collect on my raw brass mouthpiece as well as form a green ring on my lips.

Back when I used to play this raw brass 3/4 BBb, green stuff would form on my hands where they touched the instrument.
Raw brass will get a greenish patina when left alone for long times.

Brass polish or lacquer will be your best friends at solving this.
Hans
Melton 46 S
1903 or earlier GLIER Helicon, customized Hermuth MP
2009 WILLSON 6400 RZ5, customized GEWA 52 + Wessex "Chief"
MW HoJo 2011 FA, Wessex "Chief"
djwesp
5 valves
5 valves
Posts: 1166
Joined: Sat Nov 27, 2004 11:01 pm

Post by djwesp »

Isn't this called Verdigris?


Either way, i don't think it bad for the horn. A lot like tarnish on silver from what I've been told.


If it is just an aesthetic thing polish it off, but i'd keep it for character.
User avatar
Chuck(G)
6 valves
6 valves
Posts: 5679
Joined: Fri Mar 19, 2004 12:48 am
Location: Not out of the woods yet.
Contact:

Post by Chuck(G) »

The green is the result of copper corrosion in the presence of water. The corrosion products can vary, depending upon what's on the tuba and what's in the air. Copper carbonate, for example, is the product of the reaction between copper and carbon dioxide in the presence of water. But other reaction products arising from air pollution or salts in your saliva are possible.

(P.S. Strictly speaking, verdigris is copper acetate, but the word is also used to describe the color, no matter how it's created).

It's pretty easy to use a metal polish to remove the spots.

You can retard the formation of green spots by applying a good paste wax to your tuba.
quinterbourne
4 valves
4 valves
Posts: 772
Joined: Tue Aug 16, 2005 5:52 pm
Location: Ontario, Canada

Post by quinterbourne »

Do the green spots rub off? I'm not sure exactly what you're talking about, but a greenish substance did develope on my bare brass tuba (which I have since sold). I would suggest you just wash the bare brass every month, just with water and a soft cloth. I always liked the feel of bare brass after wiping it down.
User avatar
Art Hovey
pro musician
pro musician
Posts: 1508
Joined: Sun May 02, 2004 12:28 am
Location: Connecticut

Post by Art Hovey »

Acid rain or salt water droplets (such as sweat or sea-water) will cause green spots on raw brass. If you ever take your tuba apart you will find that most of the inside is green. It's just corrosion, like rust on iron, but usually does not go as rapidly.
User avatar
iiipopes
Utility Infielder
Utility Infielder
Posts: 8580
Joined: Tue Sep 06, 2005 1:10 am

Post by iiipopes »

Case in point: the souzy I play had been stored under the seats in the crawl space of an auditorium for way too many years. Spilled cola-style soda pop, complete with sugar and phosphoric acid, had dripped through the bolt holes in the concrete floor that the seats are anchored to and left drip-splash-shaped green spots all over the horn. They cleaned up easily, with only a moderate rubbing.
Jupiter JTU1110
"Real" Conn 36K
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Post by Wyvern »

Chuck(G) wrote:You can retard the formation of green spots by applying a good paste wax to your tuba.
Chuck, Can you suggest what sort of paste wax would be best? I like that idea.
User avatar
Chuck(G)
6 valves
6 valves
Posts: 5679
Joined: Fri Mar 19, 2004 12:48 am
Location: Not out of the woods yet.
Contact:

Post by Chuck(G) »

Neptune wrote:
Chuck(G) wrote:You can retard the formation of green spots by applying a good paste wax to your tuba.
Chuck, Can you suggest what sort of paste wax would be best? I like that idea.
Well, since you're in the UK, I can recommend this patriotic wax:

Image

Developed by the good folks at the British Museum. Very tough stuff. I'd use it only on those spots where you'll be holding the tuba--any wax will impart a slight haze to shiny metals and you want your bell to continue to look glaringly spectacular (or is that specular?).
:)
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Post by Wyvern »

That sounds just the job - Thanks Chuck!
Post Reply