new 4 valve sousaphones for HS band

The bulk of the musical talk
User avatar
tubaguy9
4 valves
4 valves
Posts: 943
Joined: Sat Jul 29, 2006 6:07 pm
Location: I pitty da foo!
Contact:

Post by tubaguy9 »

DaTubaKid wrote:
TubaTinker wrote:
tubaguy9 wrote: Well, maybe they are... :x Our Jupiter Sousaphones have only 3 valves, and play better than our Yamaha YBB-321's. So, I guess that Jupiter is inconsistent... :(
Huh?
He never said what was bad about the Jupiter 4 valvers...just that they had a good low range...I wouldn't pass any judgements on that statement alone, cuz a horn with a good low register is fine with me!
No, he said that the sousa's don't play well at all He said the low range was the best thing they found on them.

But, I sorta understand what TubaTinker was saying. It may be a bit confusing that the 3 valver's may play better than the 4 valver's. Pay more, get less :( I think that sounds like a rip off...
I think I might end up as a grumpy old man when I get old...
User avatar
iiipopes
Utility Infielder
Utility Infielder
Posts: 8580
Joined: Tue Sep 06, 2005 1:10 am

Post by iiipopes »

The Jupiter 3-valve is a copy of the King 1250 so it plays alright. The Jupiter 4-valve is a totally different large bore design that is, in a word, hideous.
Jupiter JTU1110
"Real" Conn 36K
tubadaddy92
bugler
bugler
Posts: 51
Joined: Fri Aug 25, 2006 11:02 pm
Location: Cookeville, TN

Post by tubadaddy92 »

the ones we recieved have terrible tuning problems on most notes. you have to pull all the slides out close to all the way to get it somewhat in tune. personally im sticking to our conn 20k's and yamaha's.
User avatar
DaTubaKid
bugler
bugler
Posts: 225
Joined: Tue May 17, 2005 9:04 pm
Location: Chicago

Post by DaTubaKid »

Thanks for the clarification tubadaddy. You're first post was vague (at least to me). You could have been refering to anything, bad intonation, bad sound, bad in bed. All of those can be implied by playing badly :D
Colby Fahrenbacher
Principal Tuba, Danville Symphony Orchestra
Associate Tuba, Civic Orchestra of Chicago
User avatar
KevinMadden
3 valves
3 valves
Posts: 481
Joined: Mon Nov 20, 2006 2:50 pm
Location: Ledgewood, NJ / Lincoln, NE

Post by KevinMadden »

bloke wrote:I'd like to see those c. 145 lb. vandals negotiate this thing through one entire summer band camp...much less one sit-down rehearsal:


bloke "speaking of 'American' and '4-valve' sousaphones..."
all these high schools should just suck it up and get a REAL outdoor instrument, I'd like the see the above mentioned 145 lb vandals play a real contra
:twisted:

Image
Ithaca College, B.M. 2009
University of Nebraska - Lincoln, M.M. 2017, D.M.A. 2020
Wessex Artiste
Wessex "Grand" BBb, Wessex Solo Eb, Wessex Dulce
User avatar
iiipopes
Utility Infielder
Utility Infielder
Posts: 8580
Joined: Tue Sep 06, 2005 1:10 am

Post by iiipopes »

richland tuba 01 wrote:I would love to play contras. some high schools already do(carmel, avon, harlingen south)
Why? And feel like you're Atlas balancing the Earth all day? Just to have spit run back into your mouth from the leadpipe? Just to not only have a sore shoulder as you do occasionally from a souzy, but sore arms, elbows, etc. as well? To double your chiropractor bill because all the weight is unbalanced on one shoulder instead of at least coming around both sides of your body? To have a smaller bore which may impede the resonance of the instrument? To have a smaller bell to impede projection?

And those are the good points to contras.
Jupiter JTU1110
"Real" Conn 36K
User avatar
KevinMadden
3 valves
3 valves
Posts: 481
Joined: Mon Nov 20, 2006 2:50 pm
Location: Ledgewood, NJ / Lincoln, NE

Post by KevinMadden »

Image

.689" bore
21" Bell
26 Lbs.

not that much smaller than the 4 valve Dynasty Souzy ...

.730 " bore
26" bell
30 Lbs.

and its 100% directional!!!
Ithaca College, B.M. 2009
University of Nebraska - Lincoln, M.M. 2017, D.M.A. 2020
Wessex Artiste
Wessex "Grand" BBb, Wessex Solo Eb, Wessex Dulce
User avatar
Dan Schultz
TubaTinker
TubaTinker
Posts: 10424
Joined: Thu Mar 18, 2004 10:46 pm
Location: Newburgh, Indiana
Contact:

Post by Dan Schultz »

KevinMadden wrote:Image

.689" bore
21" Bell
26 Lbs.

not that much smaller than the 4 valve Dynasty Souzy ...

.730 " bore
26" bell
30 Lbs.

and its 100% directional!!!
And a sousa is not!??
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
User avatar
KevinMadden
3 valves
3 valves
Posts: 481
Joined: Mon Nov 20, 2006 2:50 pm
Location: Ledgewood, NJ / Lincoln, NE

Post by KevinMadden »

TubaTinker wrote: And a sousa is not!??
okay, edit, they both are...
Ithaca College, B.M. 2009
University of Nebraska - Lincoln, M.M. 2017, D.M.A. 2020
Wessex Artiste
Wessex "Grand" BBb, Wessex Solo Eb, Wessex Dulce
User avatar
Dan Schultz
TubaTinker
TubaTinker
Posts: 10424
Joined: Thu Mar 18, 2004 10:46 pm
Location: Newburgh, Indiana
Contact:

Post by Dan Schultz »

KevinMadden wrote:
TubaTinker wrote: And a sousa is not!??
okay, edit, they both are...
:-) Sorry... didn't mean to be augumentive, but being an old guy who played in high school and military bands in the 60's... I never quite got used to the idea of using contra bugles. Now, at 60 years of age, I wouldn't ever consider putting one of those beasts on my shoulder. They are fun to fix when they collide on the field, though.

Dan 'who still has a couple of souzys' Schultz
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
User avatar
iiipopes
Utility Infielder
Utility Infielder
Posts: 8580
Joined: Tue Sep 06, 2005 1:10 am

Post by iiipopes »

Oh, yes -- another good point I forgot about contras: job security for brass repairmen.
Jupiter JTU1110
"Real" Conn 36K
User avatar
sinfonian
3 valves
3 valves
Posts: 265
Joined: Fri Mar 19, 2004 8:30 am
Location: Northwest Suburbs of Chicago

Post by sinfonian »

KevinMadden wrote:


.689" bore
21" Bell
26 Lbs.

not that much smaller than the 4 valve Dynasty Souzy ...

.730 " bore
26" bell
30 Lbs.

and its 100% directional!!!
Since this is for a G contra wouldn't the extra tubing on the Contra for a BBb make it a similar weight to the Sousaphone?
David C. Ellis
Phi Mu Alpha Sinfonia-Alpha Lambda Chapter
Crystal Lake Concert Band
Northwest Symphony Orchestra
Woodstock City Band
McHenry County College Band
Wessex TE665 "Tubby" Eb
Kanstul 90S CC For Sale
User avatar
KevinMadden
3 valves
3 valves
Posts: 481
Joined: Mon Nov 20, 2006 2:50 pm
Location: Ledgewood, NJ / Lincoln, NE

Post by KevinMadden »

sinfonian wrote:
KevinMadden wrote:


.689" bore
21" Bell
26 Lbs.

not that much smaller than the 4 valve Dynasty Souzy ...

.730 " bore
26" bell
30 Lbs.

and its 100% directional!!!
Since this is for a G contra wouldn't the extra tubing on the Contra for a BBb make it a similar weight to the Sousaphone?
no I believe the G's are bigger, Contra and Bari bugles go down to G, call them GG if you will
Ithaca College, B.M. 2009
University of Nebraska - Lincoln, M.M. 2017, D.M.A. 2020
Wessex Artiste
Wessex "Grand" BBb, Wessex Solo Eb, Wessex Dulce
User avatar
Bandmaster
4 valves
4 valves
Posts: 778
Joined: Sat May 15, 2004 3:33 am
Location: Upland, CA
Contact:

Post by Bandmaster »

KevinMadden wrote:
sinfonian wrote:
KevinMadden wrote:


.689" bore
21" Bell
26 Lbs.

not that much smaller than the 4 valve Dynasty Souzy ...

.730 " bore
26" bell
30 Lbs.

and its 100% directional!!!
Since this is for a G contra wouldn't the extra tubing on the Contra for a BBb make it a similar weight to the Sousaphone?
no I believe the G's are bigger, Contra and Bari bugles go down to G, call them GG if you will
Yes, the GG bugle is pitched a step and a half lower than a BBb tuba, so it should have tubing that is corespondingly longer. According to Kanstul's website the big GG Contrabass Bugle weights 2 lbs more than the big BBb Marching Tuba. Each has 3 valves with .689 bore and a 21" detachable bell. The GG weights 26 lbs and the BBb weights 24 lbs.
Dave Schaafsma
Image
1966 Holton 345 | 1955 York-Master | 1939 York 716 | 1940 York 702 | 1968 Besson 226 | 1962 Miraphone 186 | 1967 Olds | 1923 Keefer EEb | 1895 Conn Eb | 1927 Conn 38K | 1919 Martin Helicon
User avatar
iiipopes
Utility Infielder
Utility Infielder
Posts: 8580
Joined: Tue Sep 06, 2005 1:10 am

Post by iiipopes »

That would make the contra GG bugle @ 21 feet, 9 inches long from mouthpiece to bell rim, give or take a few inches. Unless the valve block is really far upstream close to the mouthpiece, with a really short leadpipe, that makes a .687 bore awfully small for such a large instrument.
Jupiter JTU1110
"Real" Conn 36K
User avatar
Bandmaster
4 valves
4 valves
Posts: 778
Joined: Sat May 15, 2004 3:33 am
Location: Upland, CA
Contact:

Post by Bandmaster »

Bob1062 wrote:
KevinMadden wrote:Image

.689" bore
21" Bell
26 Lbs.

not that much smaller than the 4 valve Dynasty Souzy ...

.730 " bore
26" bell
30 Lbs.

and its 100% directional!!!

I wonder if they'd make a 4 valve concert version of it! Or even 3 valves. 8)
A concert GG tuba???? :shock: No they don't, but I have played their one and only prototype 4 valve GG Contra Grande. It's even heavier, but it sure sounded good.
Dave Schaafsma
Image
1966 Holton 345 | 1955 York-Master | 1939 York 716 | 1940 York 702 | 1968 Besson 226 | 1962 Miraphone 186 | 1967 Olds | 1923 Keefer EEb | 1895 Conn Eb | 1927 Conn 38K | 1919 Martin Helicon
User avatar
iiipopes
Utility Infielder
Utility Infielder
Posts: 8580
Joined: Tue Sep 06, 2005 1:10 am

Post by iiipopes »

And they'll sound that way for about two seasons.

Sorry, I don't mean to be a grouch, but souzys just have hard lives; it's the nature of the beast.

And I don't know why people insist on carrying around the extra weight of a 4th valve. On a pre-Macmillian Conn 14 or 20, or pre-cyborg King 1250, you can make the top loop of the 1st valve slide movable, so you have perfect intonation down to low E nat, and if you need more, all three have perfect false pedal Eb with good tone. And the rebuild and lacquer is about 1/2 the cost of a new one, and it will last longer again.

I see no need for the time, expense, weight, or bother about a 4th valve on a souzy.

I'm glad you have your new ones to enjoy for the time being.
Jupiter JTU1110
"Real" Conn 36K
User avatar
MartyNeilan
6 valves
6 valves
Posts: 4876
Joined: Fri Mar 19, 2004 3:06 am
Location: Practicing counting rests.

Post by MartyNeilan »

bloke wrote:bloke "but many perceive fiberglass sousaphones to be 'bad'...and nobody asked me"
What do you think of those Yamaha fiberblass/resin things? I remember when they first came out in the 80's they were highly thought of, but I have heard little about them since.
Adjunct Instructor, Trevecca Nazarene University
User avatar
Billy M.
4 valves
4 valves
Posts: 668
Joined: Sat Mar 20, 2004 12:23 pm
Location: Pensacola, Florida USA
Contact:

Post by Billy M. »

:: sigh :: I remember the days of my King 2350 sousaphone. Man, the sound on that horn was so sweet it just wasn't fair.

No matter how many different sousaphones I've heard, the King always has and seemingly always WILL have the sweetest sound of all.
Romans 3:23-24

Billy Morris
Rudolf Meinl Model 45, Musikmesse Horn
Boosey & Hawkes Imperial Eb (19" Bell)
1968 Besson New Standard Eb (15" Bell)
Lee Stofer
4 valves
4 valves
Posts: 935
Joined: Mon Mar 22, 2004 7:50 am

Post by Lee Stofer »

It bothers me that so many subjective and sometimes downright ignorant things are said concerning sousaphones.

Sousaphones are tubas, and as such, a fine musical instrument when used and cared-for like a fine musical instrument. The Sousa Band sousaphones had 4 valves, but they only marched once or twice ever. Those instruments were designed to be played in a concert band. The valveset is by far the heaviest part of an instrument, so adding a 4th valve to an instrument to carry on your shoulder is more of a liability than an asset. The Brazilian-made instruments that sport a 4th valve, yet weigh less than many 3-valve sousaphones, have shed weight elsewhere, in the form of paper-thin tubing, flimsy braces, omitting the steel bell rim wire, paring-down the size of guard moldings or eliminating them, or a combination of all of the above. Does this sound like a good design decision for an instrument that will spend hours in use in a stadium, in the stands, and on a parade field, not to mention bus rides and use/abuse by teenagers?

Buescher, Conn, Distin, Holton, King, Martin, Olds, Reynolds, Selmer and York all made fine sousaphones, a number of which survive to this day and play well. But, none of these (except a Taiwanese-made King and an occasional 20K from Cleveland, OH, that is not like its predecessors) are available from manufacturers any more. Why? Because of the prevailing economic atmosphere where we want more and more but are wanting to always pay less for it. That is why we see cheapened-down copies of great American sousaphones of the past being built in developing countries with cheap labor and being sold here, so we can have what we are asking for at ever-cheaper prices.

Inflation is real, and manufacturers can keep their prices low for only so long until it is no longer economically feasible to build a sousaphone in the US. If you were to translate the price of a first-quality American sousaphone built in 1950 to its' cost in 2007 U.S. Dollars, it would most likely fall in the $10,000 - $12,000US range now. If there were school systems and individuals across the US willing to spend $10,000 per sousaphone today, I'm convinced that you could pick from pro-quality models from at least 4 different manufacturers in the US and several others from other countries.

When I was in high school, our program could not afford a full set of both sousaphones and concert tubas, so we used 'naked lady' Conn sousaphones on Wenger stands indoors and no one complained. They were beautiful instruments that were well-cared-for, and no one complained about using them. We played rather well in-tune without 4 valves - this IS possible. If one got damaged at all, it was the responsibility of the student and his parents to get it repaired, and the band directors and band parents made sure that the responsible party was held accountable. Reporting to a rehearsal or performance with a non-functioning instrument was reflected in our grades, and vandalism to a school instrument was a good way to get an F for the year, suspension from school, and criminal charges.

When no one is held accountable, music programs fail.
Lee A. Stofer, Jr.
Post Reply