olds BBb 4v
-
MikeMason
- 6 valves

- Posts: 2102
- Joined: Fri Mar 19, 2004 1:03 am
- Location: montgomery/gulf shores, Alabama
- Contact:
olds BBb 4v
Is this the one that is like a BBb version of a 2j? one on ebay right now. I still don't have a permanent solution for a quintet horn...
Pensacola Symphony
Troy University-adjunct tuba instructor
Yamaha yfb621 with 16’’ bell,with blokepiece symphony
Eastman 6/4 with blokepiece symphony/profundo
Troy University-adjunct tuba instructor
Yamaha yfb621 with 16’’ bell,with blokepiece symphony
Eastman 6/4 with blokepiece symphony/profundo
-
Chuck Jackson
- 5 valves

- Posts: 1811
- Joined: Fri Mar 19, 2004 8:33 pm
- Location: Las Vegas, NV
I don't think so. More like the Reynolds and one that was made in Fullerton(I really shouldn't try to remember this late at night). The bell looks really mashed up on it, but we have all seen the miracles money can buy. If you have a chance, try the Lidl 4 rotary BBb. Small, but not deceptively so. It has a nice, fat, sound and is light. Very well made and affordable. I believe Lee Stofer was handling these at one time. He doesn't deal in anything less than top notch instruments. Perfect quintet horn. Better low range than the 5J and ergonomically light years ahead of most horns. Happy Hunting.
Chuck
Chuck
I drank WHAT?!!-Socrates
- Chuck(G)
- 6 valves

- Posts: 5679
- Joined: Fri Mar 19, 2004 12:48 am
- Location: Not out of the woods yet.
- Contact:
This one looks like a 4 valve silverplate O-99.
If so, they're very similar to the 2j, but with a somewhat smaller bell (16", I believe). The bore (0.651?) is nearly the same as the 2j. They can be very sweet little instruments and not bad at all for quintet.
Assuming the bell can be rolled out without splitting, you could do much worse.
If so, they're very similar to the 2j, but with a somewhat smaller bell (16", I believe). The bore (0.651?) is nearly the same as the 2j. They can be very sweet little instruments and not bad at all for quintet.
Assuming the bell can be rolled out without splitting, you could do much worse.
- cjk
- 5 valves

- Posts: 1915
- Joined: Fri Mar 19, 2004 12:16 pm
Mike,
I'm 100% sure that if this is the tuba you're talking about, it is NOT a California-made Olds.

http://instruments.listings.ebay.com/Br ... ngItemList
The Olds brand name has been revived and is stamped on stuff made overseas.
This tuba has one of the model numbers from the "new" Olds stuff.
http://www.feolds.com/descriptions/desc ... htm#NO996S
I'm 100% sure that if this is the tuba you're talking about, it is NOT a California-made Olds.
http://instruments.listings.ebay.com/Br ... ngItemList
The Olds brand name has been revived and is stamped on stuff made overseas.
This tuba has one of the model numbers from the "new" Olds stuff.
http://www.feolds.com/descriptions/desc ... htm#NO996S
- Chuck(G)
- 6 valves

- Posts: 5679
- Joined: Fri Mar 19, 2004 12:48 am
- Location: Not out of the woods yet.
- Contact:
-
r smith
- bugler

- Posts: 71
- Joined: Wed Nov 24, 2004 3:02 am
- Location: North Vancouver, Canada
- Contact:
Re Lidl Tuba
If you have a chance, try the Lidl 4 rotary BBb. Small, but not deceptively so. It has a nice, fat, sound and is light. Very well made and affordable. I believe Lee Stofer was handling these at one time. He doesn't deal in anything less than top notch instruments. Perfect quintet horn. Better low range than the 5J and ergonomically light years ahead of most horns. Happy Hunting.
Agree. The Lidl is a very easy blowing - full sounding - light Instrument.
Ron
Agree. The Lidl is a very easy blowing - full sounding - light Instrument.
Ron
