tuba shelves?

The bulk of the musical talk
Post Reply
User avatar
Donn
6 valves
6 valves
Posts: 5977
Joined: Fri Aug 19, 2005 3:58 pm
Location: Seattle, ☯

tuba shelves?

Post by Donn »

I have been getting a little grief over the proliferation of musical instruments in my household. Confined to only one little room, and with yet a little floor space to spare, but I have to admit it's a little crowded, and liable to get worse.

There would be more room in there, if everything didn't have to sit on the floor. Have any of you resourceful tubenet denizens managed to find or build shelves that work for large, somewhat heavy instruments?
User avatar
WakinAZ
Community Band Button-Masher
Posts: 1105
Joined: Sat Sep 02, 2006 4:03 pm
Location: Back Row

Post by WakinAZ »

Something like this might work: http://www.centralrestaurant.com/Super- ... 10649.html

Otherwise, the old bandroom cubbyhole setup might be good.

Eric
jdsalas
pro musician
pro musician
Posts: 100
Joined: Fri Mar 19, 2004 7:12 am
Location: Nacogdoches, TX
Contact:

Post by jdsalas »

You might check with Skip Gray at the University of Kentucky. He has a few custom made tuba shelfs in his studio and a few years ago had the tuba-euphonium storage room outfitted with the same type of shelfs. They were pretty efective in keeping a large amount of horns safely stored in a small room. Hope this helps.

J.
J.D. Salas, D.M.A.
Assistant Professor of Music -Tuba-Euphonium Studies
Stephen F. Austin State University
Nacogdoches, TX

salasjd@sfasu.edu" target="_blank

http://jdsalas.wordpress.com" target="_blank
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Post by Wyvern »

Would not some suitable robust hooks on the wall be the answer? Strong enough for tubas, but cushioned to avoid causing any damage.

I hang my old Haag Eb on the wall when not in use. Works fine for me.
User avatar
Dean E
5 valves
5 valves
Posts: 1019
Joined: Fri Mar 19, 2004 10:36 am
Location: Northern Virginia, USA
Contact:

Post by Dean E »

Try some hooks for bikes or for general garage storage. I bought mine at Sears, but they're also at Hechinger on line. You may need to nail or screw a backup support across the wall studs.
Image
http://www.hechinger.com/web/catalog/pr ... 87873C3321
Dean E
[S]tudy politics and war, that our sons may have liberty to study mathematics and philosophy. Our sons ought to study mathematics and philosophy . . . in order to give their children a right to study painting, poetry [and] music. . . . John Adams (1780)
User avatar
SplatterTone
5 valves
5 valves
Posts: 1906
Joined: Fri Jul 15, 2005 11:17 pm
Location: Tulsa, OK
Contact:

Post by SplatterTone »

I use the String Swing guitar hanger. I have everything from alto horn to Allora 186 and Miraphone 191 hanging from them.
http://tinyurl.com/23muzf
Good signature lines: http://tinyurl.com/a47spm
TubaSteve
bugler
bugler
Posts: 156
Joined: Mon May 09, 2005 2:38 pm
Location: SE Wisconsin

Post by TubaSteve »

It's funny how the long haired sheriff doesn't seem to feel the same way about needing 6 or 7 horns. She thinks that I have enough, but I am not so sure....I have used a bicycle hanger that I wrapped in pipe insulation and use to hang one of my sousaphones. I like the cubicle idea if you are handy with wood.
Steve
MW-25, 2-Reynolds 170 (BBb Recording Bass), Reynolds 180 (EEb Recording Bass) , 2-Reynolds 140 Sousaphones, Holton 350, others.....
Bob Mosso
bugler
bugler
Posts: 211
Joined: Wed Jan 12, 2005 2:01 pm
Location: southern California
Contact:

Post by Bob Mosso »

SplatterTone wrote:I use the String Swing guitar hanger.
I second this hanger, I've used it for a euph, guitars, violin, ... I suppose if you use the right screws and make sure you hit a stud it would handle a tuba.
User avatar
ken k
6 valves
6 valves
Posts: 2372
Joined: Sun Mar 21, 2004 11:02 pm
Location: out standing in my field....

Post by ken k »

if you can hang them from the wall, you have instant decorations. Just like TGI Fridays!

I use a garage wall bicycle rack, which I bought at Sears to hang my helicon on.

ken k

Image[/img]

Image
Last edited by ken k on Tue Oct 02, 2007 10:16 pm, edited 2 times in total.
B&H imperial E flat tuba
Mirafone 187 BBb
1919 Pan American BBb Helicon
1924 Buescher BBb tuba (Dr. Suessaphone)
2009 Mazda Miata
1996 Honda Pacific Coast PC800
jeopardymaster
4 valves
4 valves
Posts: 982
Joined: Thu Dec 08, 2005 4:22 pm
Location: Ft Thomas, KY

Tubacozy

Post by jeopardymaster »

I hang my gig bags on hooks, and if I owned a sousaphone I'd probably hang it up too, but not a tuba or a euphonium. Lacking any real skills in carpentry (or photography), for less than $100 I built a cozy for my tubas and euphonia, pictures below. Euphs are on top shelf, in bags and on their sides, along with my mutes.


http://i168.photobucket.com/albums/u168 ... e005-1.jpg

http://i168.photobucket.com/albums/u168 ... e001-1.jpg

http://i168.photobucket.com/albums/u168 ... age004.jpg
User avatar
ken k
6 valves
6 valves
Posts: 2372
Joined: Sun Mar 21, 2004 11:02 pm
Location: out standing in my field....

Re: Tubacozy

Post by ken k »

That is quite a nice collection you have jeopardymaster....

Not to change the subject, but I will anyway, what all do you have there?

ken k

(PS I added pix of my helicon rack to my post above)
jeopardymaster wrote:I hang my gig bags on hooks, and if I owned a sousaphone I'd probably hang it up too, but not a tuba or a euphonium. Lacking any real skills in carpentry (or photography), for less than $100 I built a cozy for my tubas and euphonia, pictures below. Euphs are on top shelf, in bags and on their sides, along with my mutes.


http://i168.photobucket.com/albums/u168 ... e005-1.jpg

http://i168.photobucket.com/albums/u168 ... e001-1.jpg

http://i168.photobucket.com/albums/u168 ... age004.jpg
B&H imperial E flat tuba
Mirafone 187 BBb
1919 Pan American BBb Helicon
1924 Buescher BBb tuba (Dr. Suessaphone)
2009 Mazda Miata
1996 Honda Pacific Coast PC800
User avatar
WakinAZ
Community Band Button-Masher
Posts: 1105
Joined: Sat Sep 02, 2006 4:03 pm
Location: Back Row

Re: Tubacozy

Post by WakinAZ »

ken k wrote:what all do you have there?
I second that, looks intriguing...**drool**

Eric
jeopardymaster
4 valves
4 valves
Posts: 982
Joined: Thu Dec 08, 2005 4:22 pm
Location: Ft Thomas, KY

a wee bit of tubaporn

Post by jeopardymaster »

Reading left to right,

Top shelf:

Conn 18I short action euphonium (detachable bell-up)
King marching baritone
Boosey & Hawkes "Imperial" euphonium

Middle shelf:

Besson 983 Eb
Kruspe F
Gnagey "YorKing" CC

Bottom shelf:

Mirafone 186 BBb
Mirafone 184 CC
VMI Neptune CC

Wife tells me "that's it." But I still hope to find room for a cimbasso someday.
User avatar
Donn
6 valves
6 valves
Posts: 5977
Joined: Fri Aug 19, 2005 3:58 pm
Location: Seattle, ☯

Post by Donn »

jeopardymaster wrote: Wife tells me "that's it." But I still hope to find room for a cimbasso someday.
Yeah, I'm under similar constraints, which is awkward because there's more on the way as I write this. I'm not a skilled cabinet maker myself, and I'm not sure the shelves I started some time back are even going to be structurally sound, but the main problem is just that there's a lot of work left on them, due to some decisions that sounded fun at the time like mortise and tenon joinery. They'll be big, though - plenty wide to lay a sousaphone on, without anything hanging over. I guess in the interest of domestic harmony, I better get down to the basement and get back to chopping mortises, but the institutional rack shelving idea is kind of interesting.
User avatar
MaryAnn
Occasionally Visiting Pipsqueak
Occasionally Visiting Pipsqueak
Posts: 3217
Joined: Fri Mar 19, 2004 9:58 am

Post by MaryAnn »

I like the idea of transparent shelves, to better appreciate the beauty of the contents.

I'm the long-haired sheriff in my house, and let's just say that there aren't any restrictions on the number or type of instruments, but I do object to spending money on worthless junk that doesn't work and never will. That's my only point of debate with the short-haired deputy.

MA
User avatar
keronarts
bugler
bugler
Posts: 45
Joined: Mon Jul 09, 2007 2:59 pm
Location: Deep in the woods ...

Post by keronarts »

I'd agree on this one with Dean and Ken K. You could use something like a hook/ hanging system and that would also be FAR less cumbersome and space-consuming than even a tidy set of shelves. Now also bear in mind that if they're "TOO tidy", they probably won't stand up to all that tuba weight you might be throwing at them. Solution: bicycle hooks -- screw 'em into the studs.

Bear with me a minute -- I'm assuming that you have non-existent carpentry skills. The types of hooks mentioned above should be available at Sears, Lowe's, Home Depot, etc. All you have to do is to screw them into WOODEN studs -- if you have metal studs, you should use some type of mounting board [1/2" plywood, OSB ...] the weight of the instrument[s] might be enough to pull that part of the wall away if all that's there is thin-gauge metal studding.

Get some coarse grade 2 1/2" min [3" would be better ...] sheet rock screws and BE SURE you hit the studs. The type of bike hook Dean shows may also need a plywood mounting board behind it [too close screw holes for normal 16" O.C. wall studs], but it's basically a good idea. The rear vertical tubing in this particular type may also need some padding over the metal so you do NOT scratch the horn. Same should be the case with ANY surface touching the horn with ANY hook -- LOTS of padding.

As to selection of hook type, the general idea of bicycle hooks makes most sense. They're the least expensive, and they're designed to hold up the round tubing of bicycles. Your tuba is also "ROUND TUBING" ... the battle's half-way won!

To find the studs, try it the Tom Silva way. He's the GC from This Old House fame. Use your knuckles, tap down the wall/ ceiling till you reach the highest, "non-hollow" sounds -- there are the studs. That's if you have no indication visually on the wall where the studs are by way of indicator screw-heads visible in an untaped/ unfinished wall. Voila! Test-screw to be sure it's solid. Don't forget where the joint compound is to cover any boo-boos that you leave.

Good padded hooks will probably be your cheapest/ easiest solution if you haven't yet committed to the more expensive, more space-consuming shelves. Best of luck ....
Post Reply