This question is probably just to satisfy my own curiosity, since my school probably won't let me do this, but...
I like to think that I am a pretty good tuba player, but I find that the Level VI solos that are required for Area and Conference All State tend to be too high for my range.
First question- What sort of restrictions could NYSSMA have on using a tuba in a key other than BBb?
Second question- Would it be possible to get tubing to convert a BBb into a higher key (we have various Yahamas and Kings), or is it such a big difference that I would need a whole new horn?
I am working on my higher range, but I would like to at least satisfy my curious mind for this route, too.
Thanks!
Eb tubing?
-
justinbarleben
- bugler

- Posts: 60
- Joined: Sun Nov 18, 2007 3:50 pm
- Location: Albion, NY
Eb tubing?
Albion High School '09
Roberts Wesleyan College '13 (mathematics)
Rochester Crusaders Baritone '07
Rochester Crusaders Contra '08
Dansville White Sabers Contra '09
NYSSMA Conference All-State Mixed Chorus '08 (Bass 2)
Roberts Wesleyan College '13 (mathematics)
Rochester Crusaders Baritone '07
Rochester Crusaders Contra '08
Dansville White Sabers Contra '09
NYSSMA Conference All-State Mixed Chorus '08 (Bass 2)
- windshieldbug
- Once got the "hand" as a cue

- Posts: 11516
- Joined: Tue Mar 01, 2005 4:41 pm
- Location: 8vb
One of the aforementioned CC players, agreeing with what Greg said. In fact, my F is a 6/4 horn which I use with my normal mouthpiece. A bass tuba (instead of a contrabass) only puts the tonal slots further apart, making them a little more secure, but you still have to buzz the same note. A smaller bore horn changes the response, but not the note you play.
I'm doubting that state cares what key you use, as long as you can play the notes (high AND low), and can do so for their music if you make it.
A cheaper solution, and one more likely to succeed, would be to try a smaller diameter mouthpiece. That will make the higher range easier to play, but you'll likely give up some low response if you do.
This is the same issue that disappoints many trumpet players when they get their first piccolo trumpet. They don't get a magic wand that lets them play higher.
But another mouthpiece is one heck-of-a-lot less expensive than the tenor-tuba-of-your-choice.
I'm doubting that state cares what key you use, as long as you can play the notes (high AND low), and can do so for their music if you make it.
A cheaper solution, and one more likely to succeed, would be to try a smaller diameter mouthpiece. That will make the higher range easier to play, but you'll likely give up some low response if you do.
This is the same issue that disappoints many trumpet players when they get their first piccolo trumpet. They don't get a magic wand that lets them play higher.
But another mouthpiece is one heck-of-a-lot less expensive than the tenor-tuba-of-your-choice.
Instead of talking to your plants, if you yelled at them would they still grow, but only to be troubled and insecure?
- tubaguy9
- 4 valves

- Posts: 943
- Joined: Sat Jul 29, 2006 6:07 pm
- Location: I pitty da foo!
- Contact:
- greatk82
- 3 valves

- Posts: 422
- Joined: Wed Aug 04, 2004 6:28 pm
- Location: Bloomsburg, PA
- SplatterTone
- 5 valves

- Posts: 1906
- Joined: Fri Jul 15, 2005 11:17 pm
- Location: Tulsa, OK
- Contact:
The bigger mouthpiece gets a sound that I want from the BB-flat. The potential of the big bore BB-flat would be wasted with a small mouthpiece.
My E-flat horns are a Conn 14j from the 1950s (which is not much of a horn) and a Holton from 1919 which is a pretty good horn. Smaller mouthpieces are in the E-flat horns because the smaller mouthpieces get the better sound from those horns. There is no choice with the Holton because the shank size matches no standard tuba or trombone shank -- it's slightly smaller than medium trombone shank.
So the benefit of the smaller horn isn't because it is smaller, but that it matches the smaller mouthpiece. As a result, I find that it extends my comfort range upward by maybe a third or so. Both of my E-flat horns would probably be considered "medium" size for an E-flat. There is more lost off the bottom than is added on to the top when going from the BB-flat to one of these E-flat horns. It is possible that a big bore E-flat would demand the same mouthpiece as the BB-flat to get a satisfying sound.
The E-flat horns don't see much action. I've needed to use the E-flat only one time with my church music playing, and that was when the bottom part was for third trombone. The BB-flat would have tested my reliability on the upper notes, but the biggest problem was that the blend would not have worked.
I think it is a realistic goal to work at playing the B-flat on top of the staff with a BB-flat horn without resorting to a small mouthpiece. It just takes time to build the strength. By "small" I mean something like Bach 25 or smaller.
My E-flat horns are a Conn 14j from the 1950s (which is not much of a horn) and a Holton from 1919 which is a pretty good horn. Smaller mouthpieces are in the E-flat horns because the smaller mouthpieces get the better sound from those horns. There is no choice with the Holton because the shank size matches no standard tuba or trombone shank -- it's slightly smaller than medium trombone shank.
So the benefit of the smaller horn isn't because it is smaller, but that it matches the smaller mouthpiece. As a result, I find that it extends my comfort range upward by maybe a third or so. Both of my E-flat horns would probably be considered "medium" size for an E-flat. There is more lost off the bottom than is added on to the top when going from the BB-flat to one of these E-flat horns. It is possible that a big bore E-flat would demand the same mouthpiece as the BB-flat to get a satisfying sound.
The E-flat horns don't see much action. I've needed to use the E-flat only one time with my church music playing, and that was when the bottom part was for third trombone. The BB-flat would have tested my reliability on the upper notes, but the biggest problem was that the blend would not have worked.
I think it is a realistic goal to work at playing the B-flat on top of the staff with a BB-flat horn without resorting to a small mouthpiece. It just takes time to build the strength. By "small" I mean something like Bach 25 or smaller.
Good signature lines: http://tinyurl.com/a47spm
- Wyvern
- Wessex Tubas

- Posts: 5033
- Joined: Fri Sep 01, 2006 7:00 pm
- Location: Hampshire, England when not travelling around the world on Wessex business
- Contact:
Interesting the reasons for choosing different pitches of tuba. I choose my pitch of tuba to use for a piece based on firstly for appropriate tone, with security of register and fingering patterns (more in the low register) as secondary considerations.
My experience is that the highest pitch tuba is not necessarily the most secure in the high register - for example my PT-20 CC slots the E above the staff more securely than does my Eb - so would be my first choice to use for Wagner Meistersinger Overture.
You need to develop the range for high register playing. Different pitch tubas are different tools to do the job, but they will not do the job for you.
My experience is that the highest pitch tuba is not necessarily the most secure in the high register - for example my PT-20 CC slots the E above the staff more securely than does my Eb - so would be my first choice to use for Wagner Meistersinger Overture.
You need to develop the range for high register playing. Different pitch tubas are different tools to do the job, but they will not do the job for you.
- pwhitaker
- 3 valves

- Posts: 449
- Joined: Tue Sep 12, 2006 1:58 pm
- Location: Springvale, Maine
Playing high
What helps me play in the treble clef with a BBb is to use my normal large inner diameter (35+ mm) mpc with a shallow (C or D depth) bowl as opposed to the extra-deep bowl depth I normally use. I sometimes use the Joseph Klier Exclusive 1 (34 mm) with both the AA cup for normal playing and the C cup for upper register pyrotechnics. I used the same stategy on my Eb's back in the day when I was doing a lot of brass quintet and solo work.
The Marcinkiewicz mpc's all have the same rim
with varying cup depths and are a nice size (33.7 mm).
The whole Joseph Klier line does that as well: each size rim from 1 down to 4 or 5 comes in cup depths ranging from AA (extra deep) down to E or F (very shallow). The backbores also decrease in size with the cup depth.
The Marcinkiewicz mpc's all have the same rim
with varying cup depths and are a nice size (33.7 mm).
The whole Joseph Klier line does that as well: each size rim from 1 down to 4 or 5 comes in cup depths ranging from AA (extra deep) down to E or F (very shallow). The backbores also decrease in size with the cup depth.
MISERICORDE, n.
A dagger which in mediaeval warfare was used by the foot soldier to remind an unhorsed knight that he was mortal.
- Devil's Dictionary - Ambrose Bierce
A dagger which in mediaeval warfare was used by the foot soldier to remind an unhorsed knight that he was mortal.
- Devil's Dictionary - Ambrose Bierce
- OldsRecording
- 5 valves

- Posts: 1173
- Joined: Thu Feb 15, 2007 6:26 pm
- Location: Agawam, Mass.
How are the false tones on the football?greatk82 wrote:Forget an Eb tuba, you need a Miraphone TU-23 mouthpiece. No matter what you play, BBb or Eb, clarinet or NFL Football, a Miraphone TU-23 mouthpiece will make you better. That's at least the latest buzz on TubeNet. I am waiting for Miraphone TU-23 Thongs to come out next.
bardus est ut bardus probo,
Bill Souder
All mushrooms are edible, some are edible only once.
Bill Souder
All mushrooms are edible, some are edible only once.
-
Bill Troiano
- 5 valves

- Posts: 1132
- Joined: Thu Mar 18, 2004 11:08 pm
- Location: Cedar Park, TX
- windshieldbug
- Once got the "hand" as a cue

- Posts: 11516
- Joined: Tue Mar 01, 2005 4:41 pm
- Location: 8vb
