most difficult item to discard or sell...

Be kind. No government, state, or local politics allowed. Admin has final decision for any/all removed posts.
Forum rules
Be kind. No government, state, or local politics allowed. Admin has final decision for any/all removed posts.
User avatar
Dan Schultz
TubaTinker
TubaTinker
Posts: 10424
Joined: Thu Mar 18, 2004 10:46 pm
Location: Newburgh, Indiana
Contact:

Post by Dan Schultz »

- Old upright pianos.
- Large appliances of about any kind.
- A '90 Olds that doesn't run.
- A commode you replaced and your wife won't let you keep around for a flower pot!
- A 1965 seventeen foot 'Magnolia' runabout that is now filled with dirt that I use for a flower bed.
- Any size fish tanks.

And.... yet to be reckoned with.... those new-fangled 'energy saving' light bulbs that contain mercury!

As a note... I actually cut up and burried a '69 Chevelle chassis a few years back and burried it where I removed a swimming pool.

I'm sort of glad that I don't have me for a neighbor!
Last edited by Dan Schultz on Sun Apr 06, 2008 11:30 pm, edited 1 time in total.
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
oldbandnerd
5 valves
5 valves
Posts: 1031
Joined: Wed Dec 22, 2004 8:43 pm
Location: No matter where you go... there you are .
Contact:

Post by oldbandnerd »

I donated a perfectly good refrigerator to my son's Boy Scout troop. It was 15 years old and ran just fine . The wife bought a modern looking one with a satinless steel front and the water and ice dispenser in the front .
Image
User avatar
iiipopes
Utility Infielder
Utility Infielder
Posts: 8577
Joined: Tue Sep 06, 2005 1:10 am

Post by iiipopes »

Our dryer quit. All it needed was a drum belt, but in the meantime the washer had quit (not reparable -- bearings went and some other items not cost effective to replace or fix) and we got a larger washer. So we had to get a larger dryer to match as the larger washer loads were what stressed the mechanism and caused the belt to fail. In spite of needing only a single part, I couldn't sell it or give it away, and it ended up tipped out of the back of my SUV at the local metal recycling collection point.
Jupiter JTU1110 Giddings Taku (2nd Generation)
"Real" Conn 36K (K&G 3F)
User avatar
MartyNeilan
6 valves
6 valves
Posts: 4876
Joined: Fri Mar 19, 2004 3:06 am
Location: Practicing counting rests.

Post by MartyNeilan »

Big old CRT monitors; can't hardly give them away and too heavy to ship cheaply. Ones with fuzzy screens or severe burn-in are even harder to get rid of. Where I work we have to pay a company by the pound to haul them off; it is illegal to throw them in the dumpster.
Image
User avatar
Brassdad
4 valves
4 valves
Posts: 997
Joined: Wed Apr 06, 2005 4:22 pm
Location: Milford, Ohio

Post by Brassdad »

MartyNeilan wrote:Big old CRT monitors; can't hardly give them away and too heavy to ship cheaply. Ones with fuzzy screens or severe burn-in are even harder to get rid of. Where I work we have to pay a company by the pound to haul them off; it is illegal to throw them in the dumpster.
Image
Probably no more illegal than cutting up a 69 Chevelle and burrying it in the yard, :oops:
New Breed, Old Breed! It doesn't matter so long as it's the Marine Breed!
User avatar
SplatterTone
5 valves
5 valves
Posts: 1906
Joined: Fri Jul 15, 2005 11:17 pm
Location: Tulsa, OK
Contact:

Post by SplatterTone »

I was hoping a video would be online of the Yardapult commercial from Saturday Night Live -- exactly what you need for this kind of stuff.

I have an old refrigerator out in the storage building. And I have a cutting torch. The thought has crossed my mind.

My old CRT monitor, 19-inch Samsung SyncMaster 900p, is still doing a crisp 1600 x 1200 resolution.
Good signature lines: http://tinyurl.com/a47spm
User avatar
Carroll
4 valves
4 valves
Posts: 737
Joined: Sun Mar 21, 2004 12:25 am
Location: Cookeville, TN (USA)

Post by Carroll »

bloke wrote:I'm the guy that *picks up* those monitors off the curb. :shock: Each of our three computers has a curb-treasure monitor.

This *particular* computer's monitor is very washed out, and has a 1/64" split down the middle of the screen. Occasionally, it crackles and pops (along the split). When it isn't warmed up, the picture jumps all over the place.

Your company should toss its old monitors in the Goodwill or Salvation Army "dumpsters".

bloke " ...on borrowed time...' well past time to pick up *another* one from the curb"
Next time I come out West your way... I'll bring you TWO!
User avatar
Todd S. Malicoate
6 valves
6 valves
Posts: 2378
Joined: Sat Mar 20, 2004 11:12 pm
Location: Tulsa, OK

Post by Todd S. Malicoate »

tubashaman wrote:Old furniture at the curb.

YOu can sit on it, or use it but with 2 kids in the house it gets beat up after 10 years :)
:?: :?: :?:

I have no idea what that means...are you saying if you don't have 2 kids in the house...then...old furniture at the curb is ok...for YOu to sit on or use? How long does it takes for the 2 kids to beat up new furniture? Will they still be kids when it's worn out? Man, I hate these word problems late at night...

I seem to have a problem getting rid of old golf clubs. You see, I'm a bit of a golf club slut, buying a new set at least 3 times a year. Nobody wants the old ones and they're just piling up in the closet. Can't even see the coats in there anymore. Fore?
User avatar
The Big Ben
6 valves
6 valves
Posts: 3169
Joined: Sat Dec 16, 2006 11:54 am
Location: Port Townsend, WA

Re: most difficult item to discard or sell...

Post by The Big Ben »

bloke wrote:What is the most difficult household item to discard or sell?

...something big, that - even in perfect working order - might actually have *negative* worth...??

Here's my entry to get the thread going:

Image
My father wanted one of those badly... Unfortunately for him (and you) he passed away 25 years ago...
sungfw
3 valves
3 valves
Posts: 275
Joined: Wed Oct 03, 2007 1:21 pm
Location: RTP, nc

Post by sungfw »

Todd S. Malicoate wrote:
tubashaman wrote: I seem to have a problem getting rid of old golf clubs. You see, I'm a bit of a golf club slut, buying a new set at least 3 times a year. Nobody wants the old ones and they're just piling up in the closet. Can't even see the coats in there anymore. Fore?
Play It Again Sports buys SOME used golf clubs: if it's older than, maybe 10 years, they won't want it. Prices are pretty lowball (about 50% of what they can sell it for), but it's better than nothing.

Or you could donate them to a group like Big Brothers/Big Sisters, Police Athletic League, whomever, in exchange for a tax deduction.
User avatar
Tubaryan12
6 valves
6 valves
Posts: 2101
Joined: Sat Nov 13, 2004 7:49 am

Post by Tubaryan12 »

Todd S. Malicoate wrote:I seem to have a problem getting rid of old golf clubs. You see, I'm a bit of a golf club slut, buying a new set at least 3 times a year. Nobody wants the old ones and they're just piling up in the closet. Can't even see the coats in there anymore. Fore?
You wouldn't happen to have a Nickent P.I.P.E. putter in that collection of unwanted clubs, would you? :D
Marzan BBb
John Packer JP-274 euphonium
King 607F
Posting and You
User avatar
Uncle Buck
5 valves
5 valves
Posts: 1243
Joined: Fri Aug 27, 2004 3:45 pm
Location: Salt Lake City, Utah
Contact:

Post by Uncle Buck »

TubaTinker wrote: And.... yet to be reckoned with.... those new-fangled 'energy saving' light bulbs that contain mercury!
I also have a growing pile of these in my garage that need to be properly disposed of. I'm still glad I bought them - the savings on electricity bills has been exactly "as promised."

But, the advertised seven-year-life of the bulbs is complete bull.
User avatar
Todd S. Malicoate
6 valves
6 valves
Posts: 2378
Joined: Sat Mar 20, 2004 11:12 pm
Location: Tulsa, OK

Post by Todd S. Malicoate »

Tubaryan12 wrote:You wouldn't happen to have a Nickent P.I.P.E. putter in that collection of unwanted clubs, would you? :D
No, I don't like the Nickent putter. I have played with people who use one, though...generally speaking, those players are among the worst putters I've played with.

Todd "who finds it's harder to locate the spot to putt toward and the speed at which to hit the ball than to accurately putt in that direction" S. Malicoate
User avatar
Rick F
5 valves
5 valves
Posts: 1679
Joined: Thu Mar 18, 2004 11:47 pm
Location: Lake Worth, FL

Post by Rick F »

For me, it's a Dual—1019 turntable that I bought in 1969 while in the service. Just can't bring myself to tossing it even though I don't have any records to play on it any more. It was always a great turntable.


Image
Miraphone 5050 - Warburton BJ/RF mpc
YEP-641S (recently sold), DE mpc (102 rim; I-cup; I-9 shank)
Symphonic Band of the Palm Beaches:
"Always play with a good tone, never louder than lovely, never softer than supported." - author unknown.
User avatar
Tubaryan12
6 valves
6 valves
Posts: 2101
Joined: Sat Nov 13, 2004 7:49 am

Post by Tubaryan12 »

Todd S. Malicoate wrote:No, I don't like the Nickent putter. I have played with people who use one, though...generally speaking, those players are among the worst putters I've played with.
Sounds like me....you should see them without it. :lol:
Marzan BBb
John Packer JP-274 euphonium
King 607F
Posting and You
User avatar
SplatterTone
5 valves
5 valves
Posts: 1906
Joined: Fri Jul 15, 2005 11:17 pm
Location: Tulsa, OK
Contact:

Post by SplatterTone »

But, the advertised seven-year-life of the bulbs is complete bull.
Yep. I think it is only if you turn it on one day per week. The normal on-off-on-off of daily use burns these suckers right out. Maybe the LED bulbs will be better if they ever get the cost down. The LEDs seem to be working OK in traffic lights.
Good signature lines: http://tinyurl.com/a47spm
J Stowe
bugler
bugler
Posts: 166
Joined: Wed Oct 12, 2005 9:46 am
Location: Columbia, SC
Contact:

Post by J Stowe »

Are those color keys according to Rimsky-Korsakov or Scriabin's standards? :oops:
Go Dawgs!
Woo Pig!
Go Ducks!
User avatar
DonShirer
4 valves
4 valves
Posts: 571
Joined: Fri Mar 19, 2004 9:08 am
Location: Westbrook, CT

Post by DonShirer »

How about a 20 year old impact printer? Or even a 10 year old inkjet printer which doesn't have drivers to modern computers. Can't even give them away.
Don Shirer
Westbrook, CT
User avatar
SplatterTone
5 valves
5 valves
Posts: 1906
Joined: Fri Jul 15, 2005 11:17 pm
Location: Tulsa, OK
Contact:

Post by SplatterTone »

Just hang on that old stuff for long enough. I have a Friden rotary calculator with the ten key multiplier pad. And it works. Don't you know there are some folks who would love to get their hands on that.
Good signature lines: http://tinyurl.com/a47spm
tubatooter1940
6 valves
6 valves
Posts: 2530
Joined: Mon Mar 22, 2004 11:09 pm
Location: alabama gulf coast

Post by tubatooter1940 »

We have a hard time disposing of building materials left from demolition or leftover new. Nobody wants to buy them. The city won't pick them up. We have to load them on our trailer and pay the dump to take them.
We pronounce it Guf Coast
Post Reply