I own this instrument which is still in good playable conditions, I found it in France, but having come from the US maybe somebody of you there can help me in discovering something more about its origin. The engraving on the bell the says "The Rudolph Wurlitzer Co. Cincinnati" (see picture) but a small stamp below bears "exchanged for New Buescher - Elkhart In" and a serial number . What does that mean?
Thanks a lot
Gionata
Wurlitzer Helicon
-
gionvil
- bugler

- Posts: 99
- Joined: Thu Mar 27, 2008 5:10 pm
- Location: Moltrasio, Italy
Wurlitzer Helicon
You do not have the required permissions to view the files attached to this post.
- Bandmaster
- 4 valves

- Posts: 778
- Joined: Sat May 15, 2004 3:33 am
- Location: Upland, CA
- Contact:
Re: Wurlitzer Helicon
These pages show the same horn with different manufacture names, so who knows at this point? But all of these horns look VERY similar through the valve section.
http://www.horn-u-copia.net/picture.php ... elicon.jpg
http://www.horn-u-copia.net/picture.php ... elicon.jpg
http://www.horn-u-copia.net/picture.php ... elicon.jpgE. Muller, Mayence, Germania bell measures 19 ¾in
inscribed: HENRY POURCELLE, SUPERIOR, PARIS bell 19 1/2IN Pourcelle was a trade name for the Bruno Company The Bruno Company was established in New York in 1834 In 1868, the Company used C. Bruno and Son as its name. After the turn of the 20th Century, the company began using trade names including: Lafayette, Paris; Perfackton; Perfection; Henry Pourcelle, Paris; La Vesta; Vocotone.
Dave Schaafsma

1966 Holton 345 | 1955 York-Master | 1939 York 716 | 1940 York 702 | 1968 Besson 226 | 1962 Miraphone 186 | 1967 Olds | 1923 Keefer EEb | 1895 Conn Eb | 1927 Conn 38K | 1919 Martin Helicon

1966 Holton 345 | 1955 York-Master | 1939 York 716 | 1940 York 702 | 1968 Besson 226 | 1962 Miraphone 186 | 1967 Olds | 1923 Keefer EEb | 1895 Conn Eb | 1927 Conn 38K | 1919 Martin Helicon
- imperialbari
- 6 valves

- Posts: 7461
- Joined: Fri Mar 19, 2004 3:47 am
Re: Wurlitzer Helicon
This instrument looks most interesting, and I hope some of the guys in-the-know about old American makers will chime in.
For very much tuba related reasons I am busy through Saturday, but here without research I find it safe to say, that the valve tubing wrap points towards an instrument from before 1925, maybe even before 1920.
Klaus Smedegaard Bjerre
For very much tuba related reasons I am busy through Saturday, but here without research I find it safe to say, that the valve tubing wrap points towards an instrument from before 1925, maybe even before 1920.
Klaus Smedegaard Bjerre