Just an FYI. I have a pro-vision borescope for sale on E-Bay. This is just thing for looking into the valves and determining the necessary bumpers or hardware needed for correct valve alignment. I bought it for this purpose and it really made a significant difference in performance on my instruments. Money well spent. These things sell for 300 new. Buy it, use it, and re-sell it. Do-it-yourself valve alignment job for a fraction (literally pennies) of other means. Also great for checking for solder and other obstructions inside tubing bore after repair.
http://cgi.ebay.com/ebaymotors/ws/eBayI ... 0298364044" target="_blank" target="_blank
FS Pro-Vision Borecope - SOLD!!!
Forum rules
This is for posting links to off site deals that you are not personally selling,but wanting to pass along good deals
This is for posting links to off site deals that you are not personally selling,but wanting to pass along good deals
-
8vabasso
- bugler
- Posts: 50
- Joined: Thu Jul 08, 2004 8:01 pm
FS Pro-Vision Borecope - SOLD!!!
Last edited by 8vabasso on Fri Feb 06, 2009 11:03 pm, edited 1 time in total.
-
Dan Schultz
- TubaTinker
- Posts: 10424
- Joined: Thu Mar 18, 2004 10:46 pm
- Location: Newburgh, Indiana
- Contact:
Re: FS Pro-Vision Borecope
Heckofa good price! If I didn't already have a 30" Provision I'd bid!
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
-
danzeman
- bugler
- Posts: 31
- Joined: Wed Apr 30, 2008 1:56 pm
Re: FS Pro-Vision Borecope - SOLD!!!
I bought a Provision model 300 (36 inch) borescope on Ebay for $110 Item number: 320330923245
Both the 100 and 300 are 0.400 inch or 10mm diameter. If I had to buy one again I would not hesitate to buy the more expensive Provision 636. This is also a 36 inch long scope but is higher resolution and most importantly, has a much smaller diameter (0.23 inch. or 6mm) making it fit around tight bends easier. I have had a few problems getting the Provision 300 in close to see piston valve openings lining up to the pipes, even with the optional right angle mirror. I would strongly recomend getting the right angle mirror as well.
Both the 100 and 300 are 0.400 inch or 10mm diameter. If I had to buy one again I would not hesitate to buy the more expensive Provision 636. This is also a 36 inch long scope but is higher resolution and most importantly, has a much smaller diameter (0.23 inch. or 6mm) making it fit around tight bends easier. I have had a few problems getting the Provision 300 in close to see piston valve openings lining up to the pipes, even with the optional right angle mirror. I would strongly recomend getting the right angle mirror as well.