F tuba--which one might be right

The bulk of the musical talk
tubashaman2
4 valves
4 valves
Posts: 713
Joined: Tue Nov 25, 2008 12:03 am

F tuba--which one might be right

Post by tubashaman2 »

.
Last edited by tubashaman2 on Thu Apr 02, 2009 6:31 pm, edited 1 time in total.
Miraphone 1291CC
PT 10S (Made in East Germany, GDR)
YFB 621S
User avatar
Wyvern
Wessex Tubas
Wessex Tubas
Posts: 5033
Joined: Fri Sep 01, 2006 7:00 pm
Location: Hampshire, England when not travelling around the world on Wessex business
Contact:

Re: F tuba--which one might be right

Post by Wyvern »

If you liked the sound of a PT-16, but not the 4+2 valve set up, then try the 5 valve PT-15. You may also find it not so stuffy in the low register.

I am pretty new to F tubas, but still have little problem with the low register on my PT-15. And http://www.oberloh.com" target="_blank have a good used one for sale by the look of it.
User avatar
skeath
bugler
bugler
Posts: 186
Joined: Sat Jan 10, 2009 10:11 pm
Location: McKinney, TX
Contact:

Re: F tuba--which one might be right

Post by skeath »

I once bought an F based more on sound than low range/high range, and was sorry for years. I have played about 6 different Fs over the years, and the Yamaha 822 is by far the best I've ever played (full disclosure: I have not played the Firebird or the 621). The 822 is a big horn, but intonation is good, high range is very free-blowing, and response is consistent through all registers. It projects like a C tuba, and can be overpowering if you want. It also responds well to different mouthpieces, so a shallower cup brightens the sound considerably.

The downside: they are not cheap, and seldom show up in the used market. People who play them just don't sell them. :(

Sandy Keathley
Sandy Keathley, DMA
https://mckinneyfirearmstraining.com
Yamaha YFB-822S F
Gnagey Holton/King CC
Gone but not forgotten: Alexander 163 CC 5V, Mirafone 186-5U CC, Nirschl 5/4 CC
User avatar
bort
6 valves
6 valves
Posts: 11223
Joined: Wed Sep 22, 2004 11:08 pm
Location: Minneapolis, Minnesota

Re: F tuba--which one might be right

Post by bort »

You might also want to check out an MW-45 or MW-45S. These are pretty cool F tubas, with a not perfect, but learnable/workable register around the low C (but you already know what that's all about). Above and below that, the ones I've tried play and sound great. You can probably find one for less than $4000.

Or, what about a Miraphone 181?
tubashaman2
4 valves
4 valves
Posts: 713
Joined: Tue Nov 25, 2008 12:03 am

Re: F tuba--which one might be right

Post by tubashaman2 »

.
Last edited by tubashaman2 on Thu Apr 02, 2009 6:30 pm, edited 1 time in total.
Miraphone 1291CC
PT 10S (Made in East Germany, GDR)
YFB 621S
User avatar
cjk
5 valves
5 valves
Posts: 1915
Joined: Fri Mar 19, 2004 12:16 pm

Re: F tuba--which one might be right

Post by cjk »

tubashaman2 wrote:Remember I am keeping my 180, ....
Why on earth would you want to do that?
User avatar
bort
6 valves
6 valves
Posts: 11223
Joined: Wed Sep 22, 2004 11:08 pm
Location: Minneapolis, Minnesota

Re: F tuba--which one might be right

Post by bort »

For me, the 822 would be too close to the 1291 in size. I'd want a little more contrast between my contrabass and bass tubas.

I don't know, those rotary MW F tubas are just fun for me. I probably wouldn't want to play "stars and stripes forever" all day long with them, but the "C range" isn't something to scare me away. The pedal range rocks and the mid/high range is sweet.

Also, if you want to stick with a smaller F, the Cerveny F tubas are gaining a lot of fans these days...
User avatar
Rick Denney
Resident Genius
Posts: 6650
Joined: Mon Mar 22, 2004 1:18 am
Contact:

Re: F tuba--which one might be right

Post by Rick Denney »

Look into a PT-9 (B&S 3100). It has the same bell as a 10/12, but it has the smaller bore on 1, 5, and 6. That does not limit its power in any way, but it does restore the accessibility of the low register. It feels a little less open, but it does not sound a little less open. With that instrument, you might decide you don't need the 180, and I think you'll find the sound the very epitome of a German rotary F tuba, as you seem to prefer. These are harder to find in the U.S., but I think worth the search. They have the same dimensions as the old Symphonie, but that doesn't mean they are the same in every way. If you could find a 6-valve Symphonie, that would be worth looking into, but they are not common.

The Petrouschka is also the real deal. I sat and played one at the Army Conference and could have easily gone home with one were I prepared to spend that kind of scratch. My wife was appropriately instructed as to what to do should lottery winnings ever come our way.

And I will agree with Joe concerning the Willson 3200R. I've played one on several occasions, and thought it had much more of the German tone than the piston 3200, but still the plays-like-a-CC low range.

Rick "who has no use for an F tuba with an unplayable low register" Denney
tubashaman2
4 valves
4 valves
Posts: 713
Joined: Tue Nov 25, 2008 12:03 am

Re: F tuba--which one might be right

Post by tubashaman2 »

.
Last edited by tubashaman2 on Thu Apr 02, 2009 6:29 pm, edited 1 time in total.
Miraphone 1291CC
PT 10S (Made in East Germany, GDR)
YFB 621S
tubashaman2
4 valves
4 valves
Posts: 713
Joined: Tue Nov 25, 2008 12:03 am

Re: F tuba--which one might be right

Post by tubashaman2 »

.
Last edited by tubashaman2 on Thu Apr 02, 2009 6:28 pm, edited 1 time in total.
Miraphone 1291CC
PT 10S (Made in East Germany, GDR)
YFB 621S
Kory101
4 valves
4 valves
Posts: 568
Joined: Thu Dec 06, 2007 8:50 pm

Re: F tuba--which one might be right

Post by Kory101 »

I'd sell your 180 and get an 822. It can cut through an orchestra just as well, if not better than an 180.
User avatar
JB
pro musician
pro musician
Posts: 704
Joined: Fri Mar 19, 2004 1:04 pm

Re: F tuba--which one might be right

Post by JB »

bloke wrote:I hear (not directly, admittedly) that Gene Pokorny has been playing a Firebird lately.


Confirmed...; "directly."
bloke wrote:In the past (after outings with new F tubas) he's always gone back to his love-to-hate/hate-to-love early vintage Perantucci B&S F tuba.
Somehow, because of sound, I expect the same. (My first B&S Perantucci F tuba was one that he had for a spell, and used for some solo recording, as I recall...)
tubashaman2
4 valves
4 valves
Posts: 713
Joined: Tue Nov 25, 2008 12:03 am

Re: F tuba--which one might be right

Post by tubashaman2 »

.
Last edited by tubashaman2 on Thu Apr 02, 2009 6:37 pm, edited 1 time in total.
Miraphone 1291CC
PT 10S (Made in East Germany, GDR)
YFB 621S
pierso20
5 valves
5 valves
Posts: 1101
Joined: Wed Oct 18, 2006 4:33 pm
Contact:

Re: F tuba--which one might be right

Post by pierso20 »

the elephant wrote:I dislike both the PT-10 (+ various offshoots) and the Willson piston F. The other two I have not played on.
Agreed...at least the ones I played.

I do like the MW 2182 though. Very easy playing horn.
Brooke Pierson

Music Educator
Composer
Composer http://www.brookepierson.com" target="_blank" target="_blank" target="_blank
User avatar
bububassboner
pro musician
pro musician
Posts: 648
Joined: Wed Jan 03, 2007 1:16 am
Location: Sembach, Germany

Re: F tuba--which one might be right

Post by bububassboner »

bloke wrote:
tubashaman2 wrote:Bloke,

how do you say the tone is not right
That model kind-of brings to my mind an image of a very fine F tuba...
...encased in concrete.

bloke "who has gotten in trouble here more than once when speaking my mind"
I got this feeling as well when I played a Yellow brass Firebird. Yet the Gold brass Firebird is SO much better. I have always thought that Yellow Brass Miraphones had something missing in the sound. Yet every Gold Brass Miraphone i have played has been great.

Bubu"Who thinks Miraphone should make the Gold Brass option the standard" bassboner
Big tubas
Little tubas
Army Strong
Go Ducks!
Allen
3 valves
3 valves
Posts: 404
Joined: Fri Mar 19, 2004 12:29 am
Location: Boston MA area

Re: F tuba--which one might be right

Post by Allen »

Kory101 wrote:I'd sell your 180 and get an 822. It can cut through an orchestra just as well, if not better than an 180.
I'll second that. I use two different mouthpieces. One (Roger Bobo solo) gives a more focused tone -- it will be heard. The other (Roger Bobo symphonic) gives a less focused tone that blends more, and has a huge low range -- for those times when you want to sound like a modest size CC tuba.

The 822 F tubas have been evolving. The earlier ones had poor pitch, making a main tuning slide trigger a practical necessity. The later ones have much better pitch. [Mine is two years old. I just do a little first valve slide tweaking.] If I were to look for a used one, I would only look at recent vintage ones.

Cheers,
Allen
tubashaman2
4 valves
4 valves
Posts: 713
Joined: Tue Nov 25, 2008 12:03 am

Re: F tuba--which one might be right

Post by tubashaman2 »

.
Last edited by tubashaman2 on Thu Apr 02, 2009 6:36 pm, edited 1 time in total.
Miraphone 1291CC
PT 10S (Made in East Germany, GDR)
YFB 621S
tubashaman2
4 valves
4 valves
Posts: 713
Joined: Tue Nov 25, 2008 12:03 am

Re: F tuba--which one might be right

Post by tubashaman2 »

.
Last edited by tubashaman2 on Thu Apr 02, 2009 6:41 pm, edited 1 time in total.
Miraphone 1291CC
PT 10S (Made in East Germany, GDR)
YFB 621S
User avatar
Rick Denney
Resident Genius
Posts: 6650
Joined: Mon Mar 22, 2004 1:18 am
Contact:

Re: F tuba--which one might be right

Post by Rick Denney »

tubashaman2 wrote:If I could find a GOOD Older B&S F, with approval from a future teacher I will consider, also still considering Firebird, petruscka , YFB621, and MW 2182....though i think the yamaha might be too small for orchestral playing and overall use????
I found that the 621 sound had a limit beyond which it will not go. And that limit falls short of being enough for a large ensemble. Someone reported second-hand that Daellenbach claimed his 621 C was good for ensembles up to about 12 people, but I think even that is stretching it. When you try to play the 621 louder than it wants to play, it will back up on you. The only option at that point is to use a really shallow mouthpiece and go trombone-like.

But you already have a small F tuba. What's the strategery in getting another one? A PT-9/Symphonie/Willson 3200R would be an orchestral F. The notion that even the old Symphonie is a small F tuba is just nutty to me. Mine absolutely dwarfs my 621.

Rick "who uses a gig bag made for a Miraphone 186 to carry, with not that much room to spare, his B&S F" Denney
tubashaman2
4 valves
4 valves
Posts: 713
Joined: Tue Nov 25, 2008 12:03 am

Re: F tuba--which one might be right

Post by tubashaman2 »

.
Last edited by tubashaman2 on Thu Apr 02, 2009 6:41 pm, edited 1 time in total.
Miraphone 1291CC
PT 10S (Made in East Germany, GDR)
YFB 621S
Post Reply