Working on a stand tune. Calls for pedal tones...

The bulk of the musical talk
Post Reply
Funcoot
bugler
bugler
Posts: 81
Joined: Sun Mar 29, 2009 10:55 pm

Working on a stand tune. Calls for pedal tones...

Post by Funcoot »

I'm working on writing out a stand tune. It's Dirty Diana by Michael Jackson. The chart has a tuba groove that calls for a pedal eflat. Now pedal tones aren't a problem, especially Pedal Eflat. I can hit quite a few of them fairly fine with decent support. The problem is.. I've only done this on 4 valved concert tubas.. never a sousaphone. I currently don't have one with me so I can't really check it out for myself right now.

How do you finger an eflat on a sousaphone, and is it a bad idea? I'm going for the style VSU wrote theirs in. http://www.youtube.com/watch?v=zHr2Z5IrVFA" target="_blank


Any help and or advice would be greatly appreciated.
Funcoot
bugler
bugler
Posts: 81
Joined: Sun Mar 29, 2009 10:55 pm

Re: Working on a stand tune. Calls for pedal tones...

Post by Funcoot »

EEEb of course (sorry I thought that was a pedal). Haha. We want this to be plenty audible.

How do you finger that on a sousaphone?
User avatar
skeath
bugler
bugler
Posts: 186
Joined: Sat Jan 10, 2009 10:11 pm
Location: McKinney, TX
Contact:

Re: Working on a stand tune. Calls for pedal tones...

Post by skeath »

Open.
Sandy Keathley, DMA
https://mckinneyfirearmstraining.com
Yamaha YFB-822S F
Gnagey Holton/King CC
Gone but not forgotten: Alexander 163 CC 5V, Mirafone 186-5U CC, Nirschl 5/4 CC
User avatar
kontrabass
3 valves
3 valves
Posts: 282
Joined: Wed Mar 24, 2004 11:30 pm
Location: Toronto
Contact:

Re: Working on a stand tune. Calls for pedal tones...

Post by kontrabass »

The "false" Eb pedal is something I would only ever use with a mic shoved down my bell. They do not project well for outdoor playing, and they can be finicky, some horns "have" them, others are tougher. I would never write that note for a sousaphone section - it's too risky, plus I don't think it would have the kind of volume you want.

Even if they were playing 4 valve instruments, for that matter, I wouldn't write a tutti pedal Eb without a healthy representation in the octave above it. Consider how much the volume and intensity drops in the video you posted around the 1:05 mark - those are only Gs. Low Eb an octave above is in the sweet spot of "blastissimo" range. My advice - stay in that octave or (obvious choice) transpose your arrangement.

Tuba players tend to seriously overestimate the effectiveness of their pedal range in my opinion.
Rob Teehan
Toronto composer and tuba player
Visit my tuba blog: http://www.robteehan.com
Funcoot
bugler
bugler
Posts: 81
Joined: Sun Mar 29, 2009 10:55 pm

Re: Working on a stand tune. Calls for pedal tones...

Post by Funcoot »

Oh my, I've made a mistake. You're right, that is only a low G. I got the notes mixed up in my head... I don't need a pedal Eb. Wooooops. Now I feel stupid. I have the right notes in my arrangement, I just got them backwards in my head for some stupid reason.

Kind of a waste of a thread. I appreciate the advice though. I will have to think about this now.
User avatar
GC
5 valves
5 valves
Posts: 1800
Joined: Fri Mar 19, 2004 5:52 am
Location: Rome, GA (between Rosedale and Armuchee)

Re: Working on a stand tune. Calls for pedal tones...

Post by GC »

Regarding the low EEEEb: almost any note below low Bb can be played open with a little practice, including the 4Eb (assuming a Bb horn, and the same principal works in other keys). I suggest hitting the pedal Bb first and working your way down the scale rather than trying to hit a subsonic note cold (you're really hearing the harmonics and there will be very little fundamental in the tone). You can tell if you're actually doing this if you work down systematically.

Of course, you've really got to be able to relax your lips to do this, and some horns just don't produce those notes well. A big sousaphone will be better than most, though.
JP/Sterling 377 compensating Eb; Warburton "The Grail" T.G.4, RM-9 7.8, Yamaha 66D4; for sale > 1914 Conn Monster Eb (my avatar), ca. 1905 Fillmore Bros 1/4-size Eb, Bach 42B trombone
Post Reply