http://cgi.ebay.com/190536485192
At first look a run of the mill old British tenor trombone with decorated ferrules and stays.
But what is the tubing to the right in the top photo?
My immediate take is a pitch conversion pigtail to be inserted in (likely) the wide branch of the main tuning slide. But for me there is too much tubing to lower the pitch from A=459Hz to A=440Hz. And too little to take it down to an emergency G bass with too short a slide.
I am perfectly aware this is a conical list, but there are so many repairmen and cross-over players here, where I happen to be a member.
Klaus
Pitch conversion?
Forum rules
This is for posting links to off site deals that you are not personally selling,but wanting to pass along good deals
This is for posting links to off site deals that you are not personally selling,but wanting to pass along good deals
- rodgeman
- 3 valves
- Posts: 406
- Joined: Fri Jan 29, 2010 9:26 pm
Re: Pitch conversion?
Interesting. It looks more likely the extra tubing goes where the f attachment connects on other trombones.
I am not sure which key it would put it in. I found this discussion on a trombone forum:
http://tromboneforum.org/index.php?topic=6201.0
I am not sure which key it would put it in. I found this discussion on a trombone forum:
http://tromboneforum.org/index.php?topic=6201.0
- Dan Schultz
- TubaTinker
- Posts: 10424
- Joined: Thu Mar 18, 2004 10:46 pm
- Location: Newburgh, Indiana
- Contact:
Re: Pitch conversion?
I wish the pictures had better detail. At first glance... that 'loopy thing' looks like some sort of conversion. After noting that the slide fits to the bell section via a tapered ferrule.... I don't think that 'loopy thing' belongs with the instrument at all.
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
- Lingon
- 4 valves
- Posts: 558
- Joined: Fri Jan 07, 2011 8:41 am
- Location: Sweden
Re: Pitch conversion?
I also noticed that one and did also wonder what it is. It looks a bit, but not exact, like the extra tubing for a B&H Betty model G/D bass trombone to make it a G/C. If so one could speculate over why it is located in the Perfecta case?!imperialbari wrote:http://cgi.ebay.com/190536485192
...But what is the tubing to the right in the top photo?...
John Lingesjo
- Lingon
- 4 valves
- Posts: 558
- Joined: Fri Jan 07, 2011 8:41 am
- Location: Sweden
Re: Pitch conversion?
I found an old one with high and low version tuning slides. Looks more like what one can think of. http://cgi.ebay.co.uk/Rare-HAWKES-Vinta ... 2564363393
John Lingesjo
- J.c. Sherman
- 6 valves
- Posts: 2116
- Joined: Mon Apr 11, 2005 1:11 pm
- Location: Cleveland
- Contact:
Re: Pitch conversion?
Actually, it's a G crook, fit between the bell and slide to make it a bass trombone.
Yes - you loose 7th position. It's an imperfect "doublers" option. You still have a diatonic instrument, but you lose low Db and Ab. But if you're a busy bandsman, it could come in handy!
J.c.S.
Yes - you loose 7th position. It's an imperfect "doublers" option. You still have a diatonic instrument, but you lose low Db and Ab. But if you're a busy bandsman, it could come in handy!
J.c.S.
Instructor of Tuba & Euphonium, Cleveland State University
Principal Tuba, Firelands Symphony Orchestra
President, Variations in Brass
http://www.jcsherman.net
Principal Tuba, Firelands Symphony Orchestra
President, Variations in Brass
http://www.jcsherman.net
- Lingon
- 4 valves
- Posts: 558
- Joined: Fri Jan 07, 2011 8:41 am
- Location: Sweden
Re: Pitch conversion?
Nice!J.c. Sherman wrote:Actually, it's a G crook, fit between the bell and slide to make it a bass trombone.
Yes - you loose 7th position. It's an imperfect "doublers" option. You still have a diatonic instrument, but you lose low Db and Ab. But if you're a busy bandsman, it could come in handy!
J.c.S.
John Lingesjo