Mouthpiece question

The bulk of the musical talk
Post Reply
jgawn
lurker
lurker
Posts: 15
Joined: Tue Feb 01, 2005 11:52 am

Mouthpiece question

Post by jgawn »

Do i need an American shank or a large shank? (Im am from the UK and its for a Besson Eb!) Cheers
Last edited by jgawn on Mon Aug 08, 2011 12:24 pm, edited 1 time in total.
jgawn
lurker
lurker
Posts: 15
Joined: Tue Feb 01, 2005 11:52 am

Post by jgawn »

Any advice would be much appreciated
Last edited by jgawn on Sun Aug 19, 2007 9:29 pm, edited 1 time in total.
User avatar
Rick Denney
Resident Genius
Posts: 6650
Joined: Mon Mar 22, 2004 1:18 am
Contact:

Re: Mouthpiece question

Post by Rick Denney »

jgawn wrote:About to get to get a dillon M1CB for an Eb tuba. I know your all going to say its too big but it seems to work. Do i need an American shank and a large shank? (Im am from the UK and its for a Besson Eb!) Cheers
The newer Besson Eb's should be fine with an American shank, which is only slightly smaller than the European shank and are roughly interchangeable on many tubas. If it's an old Besson Eb from when they used a largish bass-trombone shank, then you'll need to convert it to a normal larger shank receiver to use a Dillon mouthpiece. I don't think they have them available in the old Besson shank. If you don't want to change the receive, you're stuck with a Wick (without the "L") or with a modular design like the Doug Elliott.

Rick "noting several 983 owners who tried the same mouthpieces I was trying at the Army conference, which were a mix of American and European shanks" Denney
scottw
5 valves
5 valves
Posts: 1519
Joined: Fri Mar 19, 2004 8:39 am
Location: South Jersey

Post by scottw »

sjra wrote:whats rong with a wick 2 L ?
Uh---L stands for large? Ergo, it won't fit? 8)
Bearin' up!
User avatar
Rick Denney
Resident Genius
Posts: 6650
Joined: Mon Mar 22, 2004 1:18 am
Contact:

Post by Rick Denney »

scottw wrote:
sjra wrote:whats rong with a wick 2 L ?
Uh---L stands for large? Ergo, it won't fit? 8)
The 2L will fit fine on a later Besson. The 2 will fit on an old Besson.

But the 2/2L is not much like a Dillon M1C, which is what the original poster wants to use.

Rick "not questioning the poster's choice" Denney
Post Reply