Tuba sound projection in marching band/drum corps?

The bulk of the musical talk
jon112780
4 valves
4 valves
Posts: 541
Joined: Sat Mar 20, 2004 10:52 am
Location: on my soapbox...

Tuba sound projection in marching band/drum corps?

Post by jon112780 »

What sousaphones/contras/mpc combinations have you found to be good at projecting 'past the bell' and not getty 'woofy'?

Maybe some ideas on some that are awful?

I have some horns/mpcs in mind from my past experiences, but just wanted to hear what others say.
Energizer Bunny arrested, charged with battery.
hurricane_harry
bugler
bugler
Posts: 187
Joined: Tue Oct 05, 2004 9:54 pm
Location: Brooklyn NY

Re: Tuba sound projection in marching band/drum corps?

Post by hurricane_harry »

any horn/mouthpiece with working valves and copious amounts of steady air
Harry Phillips IV
Miraphone 1291.5
Yamaha 822-S
jon112780
4 valves
4 valves
Posts: 541
Joined: Sat Mar 20, 2004 10:52 am
Location: on my soapbox...

Re: Tuba sound projection in marching band/drum corps?

Post by jon112780 »

hurricane_harry wrote:any horn/mouthpiece with working valves and copious amounts of steady air
Hmmm, any horn?

I remember adjudicating a marching band a few years back that had a 'fleet' of those Yamaha 3/4 marching tubas, (I'm guessing to make it easier for the kids to carry).

Their two dynamic levels were: 'I can't hear you' that eventually went up to 'Ewww, what's that sound?' in the closer.

I understand jr high kids have to march with something light enough for them to actually carry AND make music on, but there's no reason to buy 3/4 marching tubas for a high school competitive marching band.
Energizer Bunny arrested, charged with battery.
User avatar
b.williams
4 valves
4 valves
Posts: 618
Joined: Fri May 29, 2009 9:32 am

Re: Tuba sound projection in marching band/drum corps?

Post by b.williams »

Many years ago, I was sitting in the top row of Jack Murphy Stadium in San Diego CA, there was a drum and bugle corps playing the half-time show. One of the contrabass bugle players sound was hitting me in the forehead like a laser beam. I am not sure of the mouthpiece/horn combinations, but if I really wanted to project, that would be the way I would go.
Miraphone 191
Yamaha YBL-613HS Bass Trombone
Dutchtown Sousa
bugler
bugler
Posts: 151
Joined: Thu Sep 01, 2011 1:14 am

Re: Tuba sound projection in marching band/drum corps?

Post by Dutchtown Sousa »

KiltieTuba wrote:Get the LM-12

The new design kicks a$$

Pretty much anything that is deep in not good for projection. If I could make a mouthpiece, I'd make something like the LM-12 but even shallower just to see...
So the LM-3 would not be good for trying to play loud? Well I guess that helps me narrow down what I want to try out
User avatar
SousaWarrior9
3 valves
3 valves
Posts: 428
Joined: Tue Apr 19, 2011 6:22 pm

Re: Tuba sound projection in marching band/drum corps?

Post by SousaWarrior9 »

jon112780 wrote:
hurricane_harry wrote:any horn/mouthpiece with working valves and copious amounts of steady air
Hmmm, any horn?

I remember adjudicating a marching band a few years back that had a 'fleet' of those Yamaha 3/4 marching tubas, (I'm guessing to make it easier for the kids to carry).

Their two dynamic levels were: 'I can't hear you' that eventually went up to 'Ewww, what's that sound?' in the closer.

I understand jr high kids have to march with something light enough for them to actually carry AND make music on, but there's no reason to buy 3/4 marching tubas for a high school competitive marching band.
Our band has a similar problem: 6 tuba players, but only 3 sousaphones. the renaming 3 players that didn't get sousas had to use those little yamahas as well. You hit the nail right on the head, their sound goes from inaudible to absolute blatt if you try to play the slightest bit loud regardless of the player/mouthpiece. :tuba:
"Some men are macho men. Others are Martin men"

It's that word "handcraft"...
daytontuba
bugler
bugler
Posts: 50
Joined: Fri Feb 10, 2012 7:36 pm

Re: Tuba sound projection in marching band/drum corps?

Post by daytontuba »

If you can use a sousaphone, I would think I would certainly consider the Conn 20J model. Unless I am very mistaken, I think a lot of the large university marching bands use them (I know Ohio State does, and their sousaphone section has the kind of sound you can only get with in tune horns, good size bores, and players that know how to play them). They are not exactly lightweight horns, but then again, neither are the really large contras that the top flight drum corps use. Just my two cents worth!
Retired Tooter
Bob Kolada
6 valves
6 valves
Posts: 2632
Joined: Sun Jul 19, 2009 1:57 pm
Location: Chicago

Re: Tuba sound projection in marching band/drum corps?

Post by Bob Kolada »

I had a LM12 for a while; I'd bought it expecting the results I always read attributed to them and sold it when I found out it didn't do anything better than my PT48.
arpthark
5 valves
5 valves
Posts: 1195
Joined: Thu Feb 28, 2008 4:14 pm

Re: Tuba sound projection in marching band/drum corps?

Post by arpthark »

daytontuba wrote:If you can use a sousaphone, I would think I would certainly consider the Conn 20J model. Unless I am very mistaken, I think a lot of the large university marching bands use them (I know Ohio State does, and their sousaphone section has the kind of sound you can only get with in tune horns, good size bores, and players that know how to play them). They are not exactly lightweight horns, but then again, neither are the really large contras that the top flight drum corps use. Just my two cents worth!
I think you mean the Conn 20K. 20J is the model number of Conn's old 6/4-size recording bass, which are actually used, with a strap, by the Jacksonville State Marching Southerners on the field.

I used a Conn 20K in high school and thought it was a great horn, besides the low 3rd partial F; much better than the Yamahas I used when I was in university marching band, IMO. Big sound, not as apt to bark as other sousas. Woofy? Sometimes - playing on a Bach 18 or similar bowl-shaped mouthpiece helped it overcome the unfocused sound you could get with larger funnels, like the PT-48.
Dutchtown Sousa
bugler
bugler
Posts: 151
Joined: Thu Sep 01, 2011 1:14 am

Re: Tuba sound projection in marching band/drum corps?

Post by Dutchtown Sousa »

daytontuba wrote:If you can use a sousaphone, I would think I would certainly consider the Conn 20J model. Unless I am very mistaken, I think a lot of the large university marching bands use them (I know Ohio State does, and their sousaphone section has the kind of sound you can only get with in tune horns, good size bores, and players that know how to play them). They are not exactly lightweight horns, but then again, neither are the really large contras that the top flight drum corps use. Just my two cents worth!
Don't you mean 20K?
Dutchtown Sousa
bugler
bugler
Posts: 151
Joined: Thu Sep 01, 2011 1:14 am

Re: Tuba sound projection in marching band/drum corps?

Post by Dutchtown Sousa »

KiltieTuba wrote: Another section mate was playing on a Helleberg - those are just a bit deep for projecting to 40,000 footballers. I lent him my LM-11 (LM-12 with a different rim, the old style), for a week and he also bought a new LM-12.
I use Helleberg and must agree a lot of the time it feels like I'm putting in more than I am getting out in marching band situations
daytontuba
bugler
bugler
Posts: 50
Joined: Fri Feb 10, 2012 7:36 pm

Re: Tuba sound projection in marching band/drum corps?

Post by daytontuba »

Yup - 20K is correct - I will use my glasses the next time I type!!!
Retired Tooter
Dutchtown Sousa
bugler
bugler
Posts: 151
Joined: Thu Sep 01, 2011 1:14 am

Re: Tuba sound projection in marching band/drum corps?

Post by Dutchtown Sousa »

daytontuba wrote:Yup - 20K is correct - I will use my glasses the next time I type!!!
Well I'm sure the Conn 20J is nice but wouldn't be too easy to march
User avatar
muttenstrudel
bugler
bugler
Posts: 68
Joined: Fri Apr 29, 2011 8:21 pm
Location: Dinklage, Lower Saxony, Germany

Re: Tuba sound projection in marching band/drum corps?

Post by muttenstrudel »

My experience is that the bigger the horn is that you are tooting in and the lower you play the softer it gets, the more you are losing the sound in the fields. Play in a middle range (like from kontra Bb to f) and you'll be heard. I can serve an entire marching band with my Knoth F (built in 1950's) which has a comparatively small bore but a very present projection of sound especially in the middle range of a tuba. The mouthpiece I use is a Josef Klier 5E, which is the shallowest they offer. So the hint with the Loud-LM12 has the same direction: Shallow MP, loud sound.
Regards,

Uwe


Knoth F 6V (1950's)
Conn 99J CC 5V (2009)
B&S F JBL Classic 6V (2011)
playa242
lurker
lurker
Posts: 4
Joined: Fri Nov 02, 2012 9:40 am

Re: Tuba sound projection in marching band/drum corps?

Post by playa242 »

muttenstrudel wrote:My experience is that the bigger the horn is that you are tooting in and the lower you play the softer it gets, the more you are losing the sound in the fields. Play in a middle range (like from kontra Bb to f) and you'll be heard. I can serve an entire marching band with my Knoth F (built in 1950's) which has a comparatively small bore but a very present projection of sound especially in the middle range of a tuba. The mouthpiece I use is a Josef Klier 5E, which is the shallowest they offer. So the hint with the Loud-LM12 has the same direction: Shallow MP, loud sound.
Can you let us know what's the Cup's depth of the Josef Klier 5E?? I think they are the shallowest next to LOUD mouthpieces. Thanks.
User avatar
k001k47
5 valves
5 valves
Posts: 1469
Joined: Sun Aug 12, 2007 2:54 am
Location: Tejas

Re: Tuba sound projection in marching band/drum corps?

Post by k001k47 »

It's a funny thing. The less one tries (puts effort into it), the louder it gets.
Post Reply