Cracked Hard Case

The bulk of the musical talk
Post Reply
XtremeEuph
4 valves
4 valves
Posts: 598
Joined: Thu Feb 23, 2006 5:02 pm

Cracked Hard Case

Post by XtremeEuph »

The 'trusty' local repairmen sent my horn back beautifully, but with a small (1.5") long crack in the case, near the bell. Its a yamaha hard case for an 842 Euph... Maybe the repairmen will be doing this for me next time I see him :twisted:

Any suggestions to strengthen this to prevent it from getting bigger? Some sort of Putty?

I wasn't successful in searching for the correct cue words.

Thanks
peter birch
4 valves
4 valves
Posts: 553
Joined: Wed Aug 09, 2006 3:21 pm
Location: uk

Re: Cracked Hard Case

Post by peter birch »

gaffer tape is good for this.
remember though, that the job of the case is to protect the valuable instrument inside it. a few scuffs and cracks add character to the case
courtois 181 EEb
PT24+
User avatar
Rick F
5 valves
5 valves
Posts: 1679
Joined: Thu Mar 18, 2004 11:47 pm
Location: Lake Worth, FL

Re: Cracked Hard Case

Post by Rick F »

You could take the Yamaha case to a luggage repair place to get the crack patched. I've had our Samsonite suitcases patched after an airline cracked our suitcases.
Miraphone 5050 - Warburton BJ/RF mpc
YEP-641S (recently sold), DE mpc (102 rim; I-cup; I-9 shank)
Symphonic Band of the Palm Beaches:
"Always play with a good tone, never louder than lovely, never softer than supported." - author unknown.
XtremeEuph
4 valves
4 valves
Posts: 598
Joined: Thu Feb 23, 2006 5:02 pm

Re: Cracked Hard Case

Post by XtremeEuph »

Thanks guys. It doesn't affect the protection at the moment, but I don't want it to get worse, as the rest of the case is in good condition. I thought about that being a possibility Bloke, but it's more fun to blame the repairmen of course.
Uncle Markie
bugler
bugler
Posts: 199
Joined: Wed Jun 02, 2010 2:17 pm
Location: Highlands NJ - gateway to the Jersey Shore (Sandy Hook)

Re: Cracked Hard Case

Post by Uncle Markie »

Sounds like this is vacuum molded plastic. Hit the auto parts store or the Home Depot for some fiberglass cloth and resin. Scuff the surface for adhesion. Cut the cloth the length of the crack with some over lap and brush the resin/hardener over the cloth and squeegee it smooth. Sand it smooth and spray paint it match the case. The patch might make it through another flight better than the rest of the case!

I held an old Martin two-piece wood case together this way for years before it finally gave up the ghost.

Some auto repair guys (one of my sons is an Audi tech) have plastic welders which might work for you. Check around - the novelty of fixing a tuba case might appeal to an automotive repair person.

Mark Heter
Mark Heter
1926 Martin Handcraft 3v upright bell front action ; 1933 Martin Handcraft 3v bellfront; King 2341 (old style); King top-action 3v; Bach (King) fiberglass sousaphone.
User avatar
bill
3 valves
3 valves
Posts: 317
Joined: Fri May 20, 2005 5:30 pm
Location: Scappoose, OR

Re: Cracked Hard Case

Post by bill »

Uncle Markie's got the real solution if you can find the people/materials he is suggesting. With that said, I have fixed similar problems by super gluing pennies, in a row, along the crack. Of course, a piece of metal strip would do the same thing, more neatly. Just a thought . . . :roll:
Always make a good sound; audiences will forget if you miss a note but making a good sound will get you the next job.
Mark

Re: Cracked Hard Case

Post by Mark »

Has anyone tried Rhino Linings on a hard case?
User avatar
Schedonnardus
bugler
bugler
Posts: 41
Joined: Wed Nov 07, 2012 5:17 pm
Contact:

Re: Cracked Hard Case

Post by Schedonnardus »

Mark wrote:Has anyone tried Rhino Linings on a hard case?
never thought about that. I've always used gorilla tape on my cracks
Post Reply