robot tuning

The bulk of the musical talk
Post Reply
User avatar
Dan Schultz
TubaTinker
TubaTinker
Posts: 10427
Joined: Thu Mar 18, 2004 10:46 pm
Location: Newburgh, Indiana
Contact:

Re: robot tuning

Post by Dan Schultz »

That's pretty slick! I've heard about this but had not seen the information. Thanks for posting.

Maybe if they come up with one for wind instruments, they will be able to also teach the gizmo to read dynamics and articulation from the sheet music.

We have on trumpet player who's always 'over the top'. I've threatened to snitch his horn and install a restricter plate!
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
User avatar
Donn
6 valves
6 valves
Posts: 5977
Joined: Fri Aug 19, 2005 3:58 pm
Location: Seattle, ☯

Re: robot tuning

Post by Donn »

For me, I think it would have to be programmed to know what note I'm supposed to be playing at the moment, or some set of acceptable alternatives.
User avatar
MartyNeilan
6 valves
6 valves
Posts: 4878
Joined: Fri Mar 19, 2004 3:06 am
Location: Practicing counting rests.

Re: robot tuning

Post by MartyNeilan »

I can handle a lead trumpet playing sharp. Stretch tuning - just taken to an unnecessary extreme. What sounds far worse (and makes my job much harder) is when the Bari sax is consistently 20-25 cents sharp.
User avatar
Dan Schultz
TubaTinker
TubaTinker
Posts: 10427
Joined: Thu Mar 18, 2004 10:46 pm
Location: Newburgh, Indiana
Contact:

Re: robot tuning

Post by Dan Schultz »

MartyNeilan wrote:I can handle a lead trumpet playing sharp. Stretch tuning - just taken to an unnecessary extreme. What sounds far worse (and makes my job much harder) is when the Bari sax is consistently 20-25 cents sharp.
From my perspective... slightly out-of-tune timpani is very annoying!
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
User avatar
Paul Scott
pro musician
pro musician
Posts: 480
Joined: Sat Mar 20, 2004 8:11 am

Re: robot tuning

Post by Paul Scott »

My biggest gripe is when the tympani are a) out of tune and b) right behind my head!
Adjunct Tuba Professor
William Paterson University
Wayne, NJ
Mark

Re: robot tuning

Post by Mark »

MartyNeilan wrote:I can handle a lead trumpet playing sharp. Stretch tuning - just taken to an unnecessary extreme. What sounds far worse (and makes my job much harder) is when the Bari sax is consistently 20-25 cents sharp.
Yes! What is that with the bari sax?
toobagrowl
5 valves
5 valves
Posts: 1525
Joined: Mon Aug 02, 2010 3:12 pm
Location: USA

Re: robot tuning

Post by toobagrowl »

TubaTinker wrote:
From my perspective... slightly out-of-tune timpani is very annoying!
Yes! It is annoying when the tympani is playing the same notes as the tuba, but the intonation is a little off between the two. It literally disturbs the embouchure, causing turbulence in the air flow each time the tympani is struck hard. :x The tympani always "wins" there.
bernynhel
lurker
lurker
Posts: 15
Joined: Thu Feb 02, 2012 10:54 pm

Re: robot tuning

Post by bernynhel »

bloke wrote:' would be hard to make one of these for a tuba...
Rather than on the instrument, the active mechanics would need to be mounted near the center of the musician's derriere for something like this to be effective for brass or woodwind.
Mark

Re: robot tuning

Post by Mark »

bloke wrote:
Mark wrote:
MartyNeilan wrote:I can handle a lead trumpet playing sharp. Stretch tuning - just taken to an unnecessary extreme. What sounds far worse (and makes my job much harder) is when the Bari sax is consistently 20-25 cents sharp.
Yes! What is that with the bari sax?
They are deaf...from Marty (just behind them) blasting his bass trombone in their ears, and the only way they can hear themselves is to play way above pitch. :lol:
Well, maybe, but my experience is that the bari sax always plays sharp.
User avatar
Dan Schultz
TubaTinker
TubaTinker
Posts: 10427
Joined: Thu Mar 18, 2004 10:46 pm
Location: Newburgh, Indiana
Contact:

Re: robot tuning

Post by Dan Schultz »

I just looked at the price of the guitar 'thingie'. I was involved in automation and robotics for over thirty years and that gizmo is one hell of a buy considering there are six miniature servos, an accelerometer, a microprocessor, and an internal power pack involved. $300 bucks is cheap!
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
Post Reply