venting valves - question - again
- windshieldbug
- Once got the "hand" as a cue

- Posts: 11516
- Joined: Tue Mar 01, 2005 4:41 pm
- Location: 8vb
Re: venting valves - question - again
Venting valves only has an effect on slide pulling. If you are not pulling slides prior to attack look elsewhere.
Instead of talking to your plants, if you yelled at them would they still grow, but only to be troubled and insecure?
- k001k47
- 5 valves

- Posts: 1469
- Joined: Sun Aug 12, 2007 2:54 am
- Location: Tejas
Re: venting valves - question - again
bloke wrote:yeah...That happens to me too...nworbekim wrote:it feels as if there is air pressure building up somewhere and having to be released.
it's not a big problem, more of an aggravation. a slight glitch that makes me uncomfortable and if i can tweak it out, so much the better.
- sousaphone68
- 4 valves

- Posts: 980
- Joined: Thu Jun 02, 2011 6:46 pm
- Location: Ireland
Re: venting valves - question - again
Do you experience the problem on open notes or just certain valve combinations?
Cant carry a tune but I can carry a tuba.


- k001k47
- 5 valves

- Posts: 1469
- Joined: Sun Aug 12, 2007 2:54 am
- Location: Tejas
Re: venting valves - question - again
In all honesty though, I find pressure in the valve tubes very annoying, and like to pull slides; I feel you on this issue. My advice is to find a horn with vented valves and play it. If you like it - and it solves the issue - get your own valves vented!
- Ben
- 4 valves

- Posts: 718
- Joined: Mon Jan 24, 2011 7:37 pm
- Location: NYC
Re: venting valves - question - again
FWIW, Changing temperature (as it gets warmer/colder from playing/resting) of the instrument during performance can lead to differences in the pressure in the valve compartments. Although minor, while performing, I always hit the valves before an entrance in performance to avoid any minor pressure disturbances. See if this behavior helps your situation, if so, it is much cheaper then venting!
Good luck.
Good luck.
Ben Vokits
NYC/Philly area Freelancer
Nautilus Brass Quintet
Alex 164C, 163C, 155F; HB1P
NYC/Philly area Freelancer
Nautilus Brass Quintet
Alex 164C, 163C, 155F; HB1P
-
luke_hollis
- bugler

- Posts: 171
- Joined: Thu May 20, 2004 10:06 am
Re: venting valves - question - again
Some notes speak better or differently than others. Some you might miss because the note in inherently out of tune on your instrument. Try buzzing the suspect note and hitting the pitch spot on perfect exactly when you want to, then try it on the horn. You may find you miss it because the note is flat/sharp on that instrument in that partial.
I have my valves vented and it allows you to pull/push for that funky note so when you play it, it is spot on (like a Db on a CC tuba). Otherwise you miss the note.
I have my valves vented and it allows you to pull/push for that funky note so when you play it, it is spot on (like a Db on a CC tuba). Otherwise you miss the note.
-
jeopardymaster
- 4 valves

- Posts: 982
- Joined: Thu Dec 08, 2005 4:22 pm
- Location: Ft Thomas, KY
Re: venting valves - question - again
For what it's worth, there are several folks close by your neck of the woods who I would trust to do this on one of my horns. (I live in Ft Thomas, just south of the Ohio River.) Dan Schultz (Evansville) has vented valves for me - I've never had a concern or problem ever. Without hesitation I'd let Norm Eppley (still in Frankfort?) do it. Gary Dafler at Hauer Music in Dayton. Those guys are just a few hours' drive away from you at most. Bloke is a little further away, I think, but I'd trust him too. I'm sure there are quite a few others.
Gnagey CC, VMI Neptune 4098 CC, Mirafone 184-5U CC and 56 Bb, Besson 983 EEb and euphonium, King marching baritone, Alexander 163 BBb, Conn 71H/112H bass trombone, Olds Recording tenor trombone.