Any health issues known due to stainless steel mpc?

The bulk of the musical talk
Ulli
3 valves
3 valves
Posts: 281
Joined: Thu Dec 29, 2005 5:34 am

Any health issues known due to stainless steel mpc?

Post by Ulli »

I feel often a pain like a needle in the tip of my toungue, but I don't know the causation. May be, it comes from playing a stainless steel mpc?
happyroman
3 valves
3 valves
Posts: 499
Joined: Tue Mar 30, 2004 12:12 pm
Location: Evanston, IL

Re: Any health issues known due to stainless steel mpc?

Post by happyroman »

There are none that have been reported. Someone will correct me if I am wrong, but most of the manufacturers use "surgical stainless steel" so there should not be any issues. You can also do a search in the forum for the keyword "stainless" and you will find a lot of discussion about these mouthpieces that may prove to be helpful.
Andy
User avatar
Peach
4 valves
4 valves
Posts: 701
Joined: Thu Mar 17, 2005 8:42 am
Location: London, UK

Re: Any health issues known due to stainless steel mpc?

Post by Peach »

Why would any part of your tongue be in contact with your mouthpiece??
MP
Peach
User avatar
Ken Crawford
4 valves
4 valves
Posts: 722
Joined: Sat Jun 23, 2012 10:45 am
Location: Rexburg, ID

Re: Any health issues known due to stainless steel mpc?

Post by Ken Crawford »

You eat with stainless steel utensils. A mouthpiece doesn't even go into your mouth.
Ulli
3 valves
3 valves
Posts: 281
Joined: Thu Dec 29, 2005 5:34 am

Re: Any health issues known due to stainless steel mpc?

Post by Ulli »

Peach wrote:Why would any part of your tongue be in contact with your mouthpiece??
MP
to make the rim wet/slippery.
User avatar
Rick F
5 valves
5 valves
Posts: 1679
Joined: Thu Mar 18, 2004 11:47 pm
Location: Lake Worth, FL

Re: Any health issues known due to stainless steel mpc?

Post by Rick F »

Ulli wrote:
Peach wrote:Why would any part of your tongue be in contact with your mouthpiece??
MP
to make the rim wet/slippery.
Well if that is the cause, you can lick your lips real well instead of the mpc itself. Worth a try.
Last edited by Rick F on Wed Jun 17, 2015 1:34 pm, edited 1 time in total.
Miraphone 5050 - Warburton BJ/RF mpc
YEP-641S (recently sold), DE mpc (102 rim; I-cup; I-9 shank)
Symphonic Band of the Palm Beaches:
"Always play with a good tone, never louder than lovely, never softer than supported." - author unknown.
User avatar
bort
6 valves
6 valves
Posts: 11223
Joined: Wed Sep 22, 2004 11:08 pm
Location: Minneapolis, Minnesota

Re: Any health issues known due to stainless steel mpc?

Post by bort »

Canker sore? Lay off the acidic foods for a few days and see if that helps. Stainless mouthpieces are non-reactive, so you really shouldn't have any problems based on that.
Three Valves
6 valves
6 valves
Posts: 4230
Joined: Wed Jan 07, 2015 9:44 am
Location: With my fellow Thought Criminals

Re: Any health issues known due to stainless steel mpc?

Post by Three Valves »

Ulli wrote:
Peach wrote:Why would any part of your tongue be in contact with your mouthpiece??
MP
to make the rim wet/slippery.
Now I've heard everything!!
I am committed to the advancement of civil rights, minus the Marxist intimidation and thuggery of BLM.
User avatar
Worth
3 valves
3 valves
Posts: 451
Joined: Sat Jan 19, 2013 7:44 am

Re: Any health issues known due to stainless steel mpc?

Post by Worth »

Ulli wrote:
Peach wrote:Why would any part of your tongue be in contact with your mouthpiece??
MP
to make the rim wet/slippery.
I remember seeing someone who did this once. That's a rather unesthetic (looks gross) practice IMO
2014 Wisemann 900 with Laskey 30H
~1980 Cerveny 4V CC Piggy
1935 Franz Schediwy BBb
1968 Conn 2J (thinking of selling)
User avatar
MaryAnn
Occasionally Visiting Pipsqueak
Occasionally Visiting Pipsqueak
Posts: 3217
Joined: Fri Mar 19, 2004 9:58 am

Re: Any health issues known due to stainless steel mpc?

Post by MaryAnn »

Gross. Don't lick the mouthpiece. Lick your lips. And I bet you have a small canker sore that will be gone in a couple days.
User avatar
Guest User
bugler
bugler
Posts: 63
Joined: Wed Jun 17, 2015 3:05 pm

Re: Any health issues known due to stainless steel mpc?

Post by Guest User »

Not the mouthpiece. Some other issue.
This space intentionally left blank.
EMC
4 valves
4 valves
Posts: 643
Joined: Thu Sep 12, 2013 1:54 am

Re: Any health issues known due to stainless steel mpc?

Post by EMC »

Non really topic related, but I've had really bad itchiness, and rash develop from using wooden mouthpieces not to mention the woody taste that stays in your mouth for days.
Ulli
3 valves
3 valves
Posts: 281
Joined: Thu Dec 29, 2005 5:34 am

Re: Any health issues known due to stainless steel mpc?

Post by Ulli »

MaryAnn wrote:... I bet you have a small canker sore that will be gone in a couple days.
I know that needle feeling since years- mostly for some days and very painful.
There is nothing to see at my tongue- also not with a magnifying lens.

Ok, in the future I'll lick my lips... 8)
Three Valves
6 valves
6 valves
Posts: 4230
Joined: Wed Jan 07, 2015 9:44 am
Location: With my fellow Thought Criminals

Re: Any health issues known due to stainless steel mpc?

Post by Three Valves »

EMC wrote:Non really topic related, but I've had really bad itchiness, and rash develop from using wooden mouthpieces not to mention the woody taste that stays in your mouth for days.
Would you guys just get girlfriends and stop making out with your tubas already??

SHEESH!!!

:roll:
I am committed to the advancement of civil rights, minus the Marxist intimidation and thuggery of BLM.
EMC
4 valves
4 valves
Posts: 643
Joined: Thu Sep 12, 2013 1:54 am

Re: Any health issues known due to stainless steel mpc?

Post by EMC »

Three Valves wrote:
EMC wrote:Non really topic related, but I've had really bad itchiness, and rash develop from using wooden mouthpieces not to mention the woody taste that stays in your mouth for days.
Would you guys just get girlfriends and stop making out with your tubas already??

SHEESH!!!





:roll:

Sorry too ugly to get one :(
User avatar
ghmerrill
4 valves
4 valves
Posts: 653
Joined: Sat Mar 05, 2011 7:48 am
Location: Central North Carolina

Re: Any health issues known due to stainless steel mpc?

Post by ghmerrill »

Virtually all stainless steels contain some nickel. If you are allergic to nickel, even to a minor degree, this may be an issue in using a stainless steel mouthpiece.

"Surgical" stainless steel will not avoid the problem. Some years ago I smashed my right knee by tripping over my wife's motorcycle stand and driving the knee straight down onto the concrete floor of the garage. Broke the patella into three major pieces. The orthopod at the hospital put it back together with three "surgical steel" screws (looked like decking screws on the x-ray). They apparently glossed over my report of my mild nickel allergy. (Not my normal orthopaedic surgeon, by the way. He wouldn't have done that.) When it didn't heel over a period of several weeks, the surgeon conceded that probably the problem was because of the nickel in the alloy used in the screws and removed them significantly earlier than he would have preferred. It then healed just fine.

Years later I had the knee replaced -- with a titanium knee (which is also coated). No problems whatever.

Nickel keys on instruments don't seem to bother my fingertips at all. But I absolutely am unable to wear stainless steel glasses because the areas where they rest on my ears develop an itchy rash over time. Have to go with titanium.

So I think a nickel allergy may be a problem for you. You could have this checked out by an allergist to be sure. Or just avoid long-term contact with stainless steel on sensitive areas.
Gary Merrill

Wessex EEb tuba (Wick 3XL)
Amati oval euph (DE LN106J6Es)
Mack Brass euph (DE LN106J9)
Buescher 1924 Eb, std rcvr, Kelly 25
Schiller bass trombone (DE LB/J/J9/Lexan 110, Brass Ark MV50R)
Olds '47 Standard trombone (mod. Kelly 12c)
Three Valves
6 valves
6 valves
Posts: 4230
Joined: Wed Jan 07, 2015 9:44 am
Location: With my fellow Thought Criminals

Re: Any health issues known due to stainless steel mpc?

Post by Three Valves »

EMC wrote:
Three Valves wrote:
EMC wrote:Non really topic related, but I've had really bad itchiness, and rash develop from using wooden mouthpieces not to mention the woody taste that stays in your mouth for days.
Would you guys just get girlfriends and stop making out with your tubas already??

SHEESH!!!





:roll:

Sorry too ugly to get one :(
I compensate for lack of Tom Brady looks with Tom Hanks charm, and Bill Gates $$
I am committed to the advancement of civil rights, minus the Marxist intimidation and thuggery of BLM.
Ulli
3 valves
3 valves
Posts: 281
Joined: Thu Dec 29, 2005 5:34 am

Re: Any health issues known due to stainless steel mpc?

Post by Ulli »

ghmerrill wrote: So I think a nickel allergy may be a problem for you. You could have this checked out by an allergist to be sure. Or just avoid long-term contact with stainless steel on sensitive areas.
Thank you for your input. I'll avoid contact with the stainless steel mpc for awhile.
Ulli
3 valves
3 valves
Posts: 281
Joined: Thu Dec 29, 2005 5:34 am

Re: Any health issues known due to stainless steel mpc?

Post by Ulli »

Three Valves wrote:
Would you guys just get girlfriends and stop making out with your tubas already??

SHEESH!!!
:roll:

Sorry too ugly to get one :(
And that's why we may also wet our mpc rim like a dog: shlapp shlapp shlapp :mrgreen: :oops:
User avatar
ghmerrill
4 valves
4 valves
Posts: 653
Joined: Sat Mar 05, 2011 7:48 am
Location: Central North Carolina

Re: Any health issues known due to stainless steel mpc?

Post by ghmerrill »

bloke wrote: Google (related to this particularly type of dense heartwood) comes up with these: "irritant, sensitizer, nausea, asthma, pink eye"
A lot of the "exotic" hardwoods from tropical regions are quite oily or contain compounds that discourage insects. Think about how that might work on your skin over time. :roll:

If I were to think of making a mouthpiece from wood, I'd look for a close-grained dense and light wood. Maybe dogwood? Or ash? Or hard maple? Not even sure about those. Then I'd finish the hell out of the surface with something appropriate and be vigilant about restoring that on a regular basis. But I doubt seriously that I'd use a wooden mouthpiece unless it was somehow the only option.
Gary Merrill

Wessex EEb tuba (Wick 3XL)
Amati oval euph (DE LN106J6Es)
Mack Brass euph (DE LN106J9)
Buescher 1924 Eb, std rcvr, Kelly 25
Schiller bass trombone (DE LB/J/J9/Lexan 110, Brass Ark MV50R)
Olds '47 Standard trombone (mod. Kelly 12c)
Post Reply