ok...(admittedly) tooting my own horn

Be kind. No government, state, or local politics allowed. Admin has final decision for any/all removed posts.
Forum rules
Be kind. No government, state, or local politics allowed. Admin has final decision for any/all removed posts.
Post Reply
User avatar
opus37
5 valves
5 valves
Posts: 1326
Joined: Wed Sep 15, 2010 4:22 pm
Location: Woodbury, MN

Re: ok...(admittedly) tooting my own horn

Post by opus37 »

People have made buildings out of pallets, others just burn them. You have deconstructed a pallet. That is very contemporary. A deconstructed salad or sandwich is at least twice as expensive as a constructed one. Now you have to decide if this is going to be sold for a profit, burned as kindling, or reconstructed into something useful.
Brian
1892 Courtiere (J.W. Pepper Import) Helicon Eb
1980's Yamaha 321 euphonium
2007 Miraphone 383 Starlight
2010 Kanstul 66T
2016 Bubbie Mark 5
User avatar
bort
6 valves
6 valves
Posts: 11223
Joined: Wed Sep 22, 2004 11:08 pm
Location: Minneapolis, Minnesota

Re: ok...(admittedly) tooting my own horn

Post by bort »

I will only be impressed when you pick it up. :)
Three Valves
6 valves
6 valves
Posts: 4230
Joined: Wed Jan 07, 2015 9:44 am
Location: With my fellow Thought Criminals

Re: ok...(admittedly) tooting my own horn

Post by Three Valves »

opus37 wrote:.... or reconstructed into something useful.
Repurposing it would be even more trendy!!
I am committed to the advancement of civil rights, minus the Marxist intimidation and thuggery of BLM.
User avatar
iiipopes
Utility Infielder
Utility Infielder
Posts: 8579
Joined: Tue Sep 06, 2005 1:10 am

Re: ok...(admittedly) tooting my own horn

Post by iiipopes »

I have to say that a few years ago, when BoB Taylor made a guitar out of salvaged pallets that it cause a lot of head turning and reevaluation as to what was a "tone wood"!
Last edited by iiipopes on Thu Jan 07, 2016 9:36 am, edited 1 time in total.
Jupiter JTU1110 Giddings Taku (2nd Generation)
"Real" Conn 36K Conn Helleburg
Ace
5 valves
5 valves
Posts: 1395
Joined: Fri Mar 19, 2004 12:46 am
Location: Berkeley, CA

Re: ok...(admittedly) tooting my own horn

Post by Ace »

Careful, Joe. There are people (unnamed) on this board who will flame you for a post like that.
Ace
Ace
5 valves
5 valves
Posts: 1395
Joined: Fri Mar 19, 2004 12:46 am
Location: Berkeley, CA

Re: ok...(admittedly) tooting my own horn

Post by Ace »

bloke wrote:
Ace wrote:Careful, Joe. There are people (unnamed) on this board who will flame you for a post like that.
Ace
no bad puns (particularly not double-puns) allowed in my threads Image
Here's the antidote for bad puns.

http://www.goodhumor.com/product/detail ... good-humor" target="_blank

Ace
scottw
5 valves
5 valves
Posts: 1519
Joined: Fri Mar 19, 2004 8:39 am
Location: South Jersey

Re: ok...(admittedly) tooting my own horn

Post by scottw »

Not to diminish your accomplishment, Joe, but I worked for almost a full week back in my college days operating a huge pneumatic machine whose sole purpose on earth was to break up pallets, hundreds of them per day. Load 'em in, position all the little pawls, pull the lever and watch them come out looking like your pile. Of course, it also leaked pneumatic oil by the quart, squirting all over the operator in 95 degree heat and humidity, under the broiling sun or in the rain. Loved that job! :D
Bearin' up!
Three Valves
6 valves
6 valves
Posts: 4230
Joined: Wed Jan 07, 2015 9:44 am
Location: With my fellow Thought Criminals

Re: ok...(admittedly) tooting my own horn

Post by Three Valves »

scottw wrote:Not to diminish your accomplishment, Joe, but I worked for almost a full week back in my college days operating a huge pneumatic machine whose sole purpose on earth was to break up pallets, hundreds of them per day.
That's hardly comparable to Bloke's artisanal deconstruction.
I am committed to the advancement of civil rights, minus the Marxist intimidation and thuggery of BLM.
scottw
5 valves
5 valves
Posts: 1519
Joined: Fri Mar 19, 2004 8:39 am
Location: South Jersey

Re: ok...(admittedly) tooting my own horn

Post by scottw »

Three Valves wrote:
scottw wrote:Not to diminish your accomplishment, Joe, but I worked for almost a full week back in my college days operating a huge pneumatic machine whose sole purpose on earth was to break up pallets, hundreds of them per day.
That's hardly comparable to Bloke's artisanal deconstruction.
Okay, you got me on the "artisanal" part of it. I did it for the $1.65/hr, not for anything vaguely artistic. :D
Bearin' up!
tbn.al
6 valves
6 valves
Posts: 3004
Joined: Thu Apr 21, 2005 6:00 pm
Location: Atlanta, Ga

Re: ok...(admittedly) tooting my own horn

Post by tbn.al »

scottw wrote:Okay, you got me on the "artisanal" part of it. I did it for the $1.65/hr, not for anything vaguely artistic. :D
Careful there, you are very close to divulging your age.
I am fortunate to have a great job that feeds my family well, but music feeds my soul.
scottw
5 valves
5 valves
Posts: 1519
Joined: Fri Mar 19, 2004 8:39 am
Location: South Jersey

Re: ok...(admittedly) tooting my own horn

Post by scottw »

bloke wrote:
tbn.al wrote:
scottw wrote:Okay, you got me on the "artisanal" part of it. I did it for the $1.65/hr, not for anything vaguely artistic. :D
Careful there, you are very close to divulging your age.
:lol:

I remember the big jump to $2.00/hr. in 1974.
(SEARS hired me at $2.25 for whatever reason...??)

Image

That does date me, you are correct.
Mind you, I went to the pallet job after 2 weeks of following along behind a tractor with a rake attachment, picking up rocks in preparation for planting grass on a new golf course. With a peach basket. In July. In S.Jersey, where the humidity is in direct competition with the temperature. When I got home, I had to take 2 showers to get the dust off every day. Ah, the good old days! :D
Bearin' up!
tbn.al
6 valves
6 valves
Posts: 3004
Joined: Thu Apr 21, 2005 6:00 pm
Location: Atlanta, Ga

Re: ok...(admittedly) tooting my own horn

Post by tbn.al »

When it went to $1.40 in 67 I was working the night shift at a gas station to pay for tuition. I suddenly had enough money to afford cigarettes. Boy was I young and stupid. It was so much easier to start smoking than it was to stop 25 years later.
I am fortunate to have a great job that feeds my family well, but music feeds my soul.
Post Reply