Hello all I get my first horn tomorrow and yes the excitement is killing me. It has been sitting in a terminal at the airport all weekend so I can only assume all the valves and slides will be completely dried out. Now with my school horn(Rotary old Miraphone) I would use sewing maching oil and then this radio shack electronic parts lube for the slides. Naturally my Horn(Besson 995) will be my baby so I was curious if anyone knew of oils and greases that are easy and low maintenance(Meaning I dont have to lube up every day) I am currently in Phoenix so it needs to be able to withstand hot and dry weather. Thanks in advance for the suggestions.
JB
First Horn, have a question
-
- bugler
- Posts: 87
- Joined: Mon Dec 06, 2004 3:35 pm
- Location: Phoenix, AZ
- Dan Schultz
- TubaTinker
- Posts: 10424
- Joined: Thu Mar 18, 2004 10:46 pm
- Location: Newburgh, Indiana
- Contact:
Can you arrange to send me the 'old' Miraphone?
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
- JayW
- 4 valves
- Posts: 579
- Joined: Fri Mar 19, 2004 2:18 am
- Location: Northern NJ aka NYC suburb
- Contact:
-
- bugler
- Posts: 87
- Joined: Mon Dec 06, 2004 3:35 pm
- Location: Phoenix, AZ
- Dan Schultz
- TubaTinker
- Posts: 10424
- Joined: Thu Mar 18, 2004 10:46 pm
- Location: Newburgh, Indiana
- Contact:
It was worth a try! heh hehTubaman485 wrote:The Miraphone is owned by my university but if I could I would send it your way.
JB
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
-
- 5 valves
- Posts: 1031
- Joined: Wed Dec 22, 2004 8:43 pm
- Location: No matter where you go... there you are .
- Contact:
-
- 5 valves
- Posts: 1132
- Joined: Thu Mar 18, 2004 11:08 pm
- Location: Cedar Park, TX
Zaja, the company that makes the various scented valve oil products, makes a slide grease that works very well and lasts longer than most others.
http://www.zajamusic.com/lube.htm
http://www.zajamusic.com/lube.htm
-
- bugler
- Posts: 87
- Joined: Mon Dec 06, 2004 3:35 pm
- Location: Phoenix, AZ
-
- bugler
- Posts: 87
- Joined: Mon Dec 06, 2004 3:35 pm
- Location: Phoenix, AZ