Guides and grooves - reversed
Forum rules
This is for posting links to off site deals that you are not personally selling,but wanting to pass along good deals
This is for posting links to off site deals that you are not personally selling,but wanting to pass along good deals
-
imperialbari
- 6 valves
- Posts: 7461
- Joined: Fri Mar 19, 2004 3:47 am
-
bisontuba
- 6 valves
- Posts: 4320
- Joined: Sat Mar 20, 2004 8:55 am
- Location: Bottom of Lake Erie
Re: Guides and grooves - reversed
Never seen that before!
Mark
Mark
-
Dan Schultz
- TubaTinker
- Posts: 10424
- Joined: Thu Mar 18, 2004 10:46 pm
- Location: Newburgh, Indiana
- Contact:
Re: Guides and grooves - reversed
Common on Berliner Pumpen valves.
Dan Schultz
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
"The Village Tinker"
http://www.thevillagetinker.com" target="_blank
Current 'stable'... Rudolf Meinl 5/4, Marzan (by Willson) euph, King 2341, Alphorn, and other strange stuff.
-
bisontuba
- 6 valves
- Posts: 4320
- Joined: Sat Mar 20, 2004 8:55 am
- Location: Bottom of Lake Erie
Re: Guides and grooves - reversed
Hi-
Yes, the setup is similar to Berliner pumpen valves, but on those valves the pstons are short and fat/stubby and the slots are at the top.
This looks to be some short of hybrid perinet piston with the screws in the casings similar to Berliner valves BUT with the slots on the bottom of the pistons--most interesting....
Mark
Yes, the setup is similar to Berliner pumpen valves, but on those valves the pstons are short and fat/stubby and the slots are at the top.
This looks to be some short of hybrid perinet piston with the screws in the casings similar to Berliner valves BUT with the slots on the bottom of the pistons--most interesting....
Mark