Riding Lawn mower preferance....

Be kind. No government, state, or local politics allowed. Admin has final decision for any/all removed posts.
Forum rules
Be kind. No government, state, or local politics allowed. Admin has final decision for any/all removed posts.
clagar777
3 valves
3 valves
Posts: 349
Joined: Thu Mar 17, 2005 12:17 am
Location: Texas

ZTR's

Post by clagar777 »

You can't beat a zero-turn radius riding lawn mower if you have a large yard, even more so if there are many obstacles to avoid such as trees.
User avatar
Chuck(G)
6 valves
6 valves
Posts: 5679
Joined: Fri Mar 19, 2004 12:48 am
Location: Not out of the woods yet.
Contact:

Post by Chuck(G) »

One of my neighbors has these--they do a pretty good job on the grass and the kids can ride them:
Image
User avatar
Joe Baker
5 valves
5 valves
Posts: 1162
Joined: Fri Mar 19, 2004 8:37 am
Location: Knoxville, TN

Re: Riding Lawn mower preferance....

Post by Joe Baker »

Greg wrote:I have recently moved to a new home with a rather large yard (100X200) and it looks like I am going to end up buying a riding lawn mower. Anyone willing to volunteer some preferances and reasons for buying or avoiding a certain model?

Thanks for any advice,
Greg
The engineer in me is unable to arrive at a recommendation until I know the requirements. Is your lot flat or hilly? Lots of trees and flower beds, or just open grass? What kind of grass? Are you looking to just keep it under control, or are you willing to spend some $$ for a machine that will really manicure it? Which is the higher priority: getting done quickly or spending a little more time and having it look perfect? Do you have a budget?

So far, your question is a little like "Hey, guys, I'm going to buy a tuba. What kind should I buy?" Give a little more input and I believe you'll get a lot more output.
_____________________________
Joe Baker, who advises hanging onto the push mower in any case, for trim work and tight spots.
"Luck" is what happens when preparation meets opportunity -- Seneca
ThomasP
3 valves
3 valves
Posts: 337
Joined: Fri Mar 19, 2004 1:24 am
Location: Atlanta, GA
Contact:

Post by ThomasP »

Of course there's the question, do you want a Lawn Tractor, or only a Lawn Mower? That being said my uncle bought a Kubota, and I really like it, it's extremely simple. I found out while looking for lawn tractor's with him that the higher end models don't have the horsepower that the model's you'll find at your local big hardware store. For example, his Kubota is only 17.5 hp, but for the same amount of money he could have gotten a Craftsmen tractor with more than twice that amount of hp. He went with Kubota because of its reputation.

My $.02, and it's probably not worth that.
Thomas Peacock
Huttl for life
Schilke 66
User avatar
windshieldbug
Once got the "hand" as a cue
Once got the "hand" as a cue
Posts: 11513
Joined: Tue Mar 01, 2005 4:41 pm
Location: 8vb

Post by windshieldbug »

Are you thinking silver or lacquer? Or maybe both? :oops:
tubatooter1940
6 valves
6 valves
Posts: 2530
Joined: Mon Mar 22, 2004 11:09 pm
Location: alabama gulf coast

Post by tubatooter1940 »

I finally found a push mower I like by Toro. I like all Toro products.
When I moved to a larger yard I had to have a Husqvarna 20 hp riding mower or lawn tractor. Made in the U.S.A..
Shockwave
3 valves
3 valves
Posts: 313
Joined: Sun Mar 21, 2004 7:27 pm

Post by Shockwave »

I'm house sitting for my uncle (nice vacation) in a small neighborhood of McMansions on 1-2 acre lots. I've noticed that the professionals who mow the other yards in the neighborhood all use large walk-behind mowers. I have to use a 20hp Scotts yard tractor to mow the lawn and I can see why pros don't use yard tractors. The ride is extremely bumpy, trying to turn sharply carves ruts, and it cant get close enough to cut around ledges, signs, and mailboxes. Frankly I would rather walk than ride on that bumpy tractor.

-Eric
User avatar
Joe Baker
5 valves
5 valves
Posts: 1162
Joined: Fri Mar 19, 2004 8:37 am
Location: Knoxville, TN

Post by Joe Baker »

Thanks for filling in some of the gaps, Greg.

First, 100x200 isn't all THAT big. Just about any rider should knock it out in an hour or less. Since it's flat, and you're planning to add trees, maneuverability is going to be your number one priority. You don't need the thing to be any wider than 36", and you should look for a tight turning radius. You don't need more than 12 HP for a flat lawn, though a little more power won't hurt any, either, especially if you plan to mulch (and even moreso if you expect to miss a week now and then!) I'd be looking for one that has a short turning radius and able to change speed without stopping (many -- my own, for example -- require you to come to a dead stop to change gear ratios. Never again...) If I were buying for a lawn of this size, I'd be looking at a rear-engine rather than a front engine, with one longer blade rather than two shorter ones. I'd look for a mulching attachment. And I'd make sure the seat is comfortable and padded.

I've always been a fan of Briggs & Stratton engines, but I've got a Tecumseh I bought three years ago (6.5 HP, on my 21" high-wheel walk-behind) that starts on the first pull, runs like a hose, and has required ZERO work other than annually changing the oil and replacing the air filter), so I think they must have really improved their quality. I haven't looked at any of the fancier name brands, so I don't know if they have their own engines or if they use B&S or Tecumseh; if they have their own, you'll want to do some research to see how reliable they are, and whether there's a qualified repair person in your area.

Good luck!
___________________________
Joe Baker, who has been quite happy with his $400 used 17 HP, 42" cut mower for a hilly lot that's about 350x120 -- but who cuts his relatively small front yard with a walk-behind so it'll look nicer.
"Luck" is what happens when preparation meets opportunity -- Seneca
User avatar
Kevin Miller
bugler
bugler
Posts: 227
Joined: Fri Mar 19, 2004 6:33 am
Contact:

Post by Kevin Miller »

Make sure it has a proper cup holder for your beer. You gotta have priorities man!
Kevin Miller
Private Teacher/Freelancer
Tulsa Opera Orchestra
Bravo Brass
User avatar
Chuck(G)
6 valves
6 valves
Posts: 5679
Joined: Fri Mar 19, 2004 12:48 am
Location: Not out of the woods yet.
Contact:

Post by Chuck(G) »

bloke wrote: ...and those folk haven't figgered out how to properly use goats...
The poster asked about riding mowers, Joe! You can't (or at least I wouldn't want to try) ride a goat. You could ride one of these, though, but they take some pretty pricey upkeep:

Image
tubatooter1940
6 valves
6 valves
Posts: 2530
Joined: Mon Mar 22, 2004 11:09 pm
Location: alabama gulf coast

Post by tubatooter1940 »

If anybody puts an open beer in the rear fender drink holder of a riding lawn mower, a lot of grass will get in it. Hate to drink all that grass!
User avatar
Chuck(G)
6 valves
6 valves
Posts: 5679
Joined: Fri Mar 19, 2004 12:48 am
Location: Not out of the woods yet.
Contact:

Post by Chuck(G) »

bloke wrote:Chuck,

Of course, you're right as usual, but for a 100' X 200' (less footprints of house, driveway, yardbarn, and truck-garden) this should more than do the trick:

Image
Now that just ain't right!
User avatar
Dylan King
YouTube Tubist
YouTube Tubist
Posts: 1602
Joined: Tue Aug 17, 2004 1:56 am
Location: Weddington, NC, USA.
Contact:

Post by Dylan King »

Image
User avatar
Matt G
5 valves
5 valves
Posts: 1196
Joined: Fri Mar 19, 2004 9:24 am
Location: Quahog, RI

Post by Matt G »

Joe Baker wrote:
You don't need the thing to be any wider than 36", and you should look for a tight turning radius. You don't need more than 12 HP for a flat lawn, though a little more power won't hurt any, either, especially if you plan to mulch (and even moreso if you expect to miss a week now and then!) I'd be looking for one that has a short turning radius and able to change speed without stopping (many -- my own, for example -- require you to come to a dead stop to change gear ratios. Never again...) If I were buying for a lawn of this size, I'd be looking at a rear-engine rather than a front engine, with one longer blade rather than two shorter ones. I'd look for a mulching attachment. And I'd make sure the seat is comfortable and padded.
I agree here. Your yard is really pretty small (less than a half-acre).

I remember these being popular down home (FL) for people with yards from about 1/3-2 acres:

Image

11HP to 15hp, great turn radius, good build quality and reliability. You can even stand it on end for storage and repair. Starts at about $1200.
Dillon/Walters CC
Meinl Weston 2165
User avatar
Lew
5 valves
5 valves
Posts: 1700
Joined: Fri Mar 19, 2004 4:57 pm
Location: Annville, PA

Post by Lew »

Matthew Gilchrest wrote:
Joe Baker wrote:
You don't need the thing to be any wider than 36", and you should look for a tight turning radius. You don't need more than 12 HP for a flat lawn, though a little more power won't hurt any, either, especially if you plan to mulch (and even moreso if you expect to miss a week now and then!) I'd be looking for one that has a short turning radius and able to change speed without stopping (many -- my own, for example -- require you to come to a dead stop to change gear ratios. Never again...) If I were buying for a lawn of this size, I'd be looking at a rear-engine rather than a front engine, with one longer blade rather than two shorter ones. I'd look for a mulching attachment. And I'd make sure the seat is comfortable and padded.
I agree here. Your yard is really pretty small (less than a half-acre).

I remember these being popular down home (FL) for people with yards from about 1/3-2 acres:

Image

11HP to 15hp, great turn radius, good build quality and reliability. You can even stand it on end for storage and repair. Starts at about $1200.
I had one of those (back when I used to cut my own grass) and although it was reliable and did a decent job, the turning radius wasn't so great. I would look for one that specifically says it has a very tight turning radius. I seem to remember someone advertising a "zero turning radius" mower.

OTOH, a riding mower seems like overkill for a half an acre. I would think that a good self-propelled walk behind mower would be more than enough.
Besson 983
Henry Distin 1897 BBb tuba
Henry Distin 1898 BBb Helicon
Eastman EBB226
User avatar
Matt G
5 valves
5 valves
Posts: 1196
Joined: Fri Mar 19, 2004 9:24 am
Location: Quahog, RI

Post by Matt G »

One other option, if you are looking to mow your area in about 7 minutes:

Image
Dillon/Walters CC
Meinl Weston 2165
User avatar
Dylan King
YouTube Tubist
YouTube Tubist
Posts: 1602
Joined: Tue Aug 17, 2004 1:56 am
Location: Weddington, NC, USA.
Contact:

Post by Dylan King »

MellowSmokeMan wrote:Image
I wonder if anyone actually noticed my lawn mower in this picture.
User avatar
windshieldbug
Once got the "hand" as a cue
Once got the "hand" as a cue
Posts: 11513
Joined: Tue Mar 01, 2005 4:41 pm
Location: 8vb

Post by windshieldbug »

MellowSmokeMan wrote:I wonder if anyone actually noticed my lawn mower in this picture.
No, but we noticed the Astro-Turf!... :lol:
User avatar
Dylan King
YouTube Tubist
YouTube Tubist
Posts: 1602
Joined: Tue Aug 17, 2004 1:56 am
Location: Weddington, NC, USA.
Contact:

Post by Dylan King »

windshieldbug wrote:
MellowSmokeMan wrote:I wonder if anyone actually noticed my lawn mower in this picture.
No, but we noticed the Astro-Turf!... :lol:
It's funny. Now that I think about it, I water that grass all the time and it never grows. When I neglect watering, it never dies. Wow. It is astro-turf. No wonder my knees have been bothering me lately.
User avatar
ThomasDodd
5 valves
5 valves
Posts: 1161
Joined: Tue Mar 23, 2004 11:37 am
Location: BFE, Mississippi

Post by ThomasDodd »

Find a used rider (pull the deck) or ATV and hook one of These up.
ImageImage

That give you a better cutting system (better for the grass), good mulching, and low mainenance, lower power requriements (so less fuel). If you go ATV, you also have an ATV for fun, a real dual use system :)

Note, When my mower deck finaly rusts through enough I cannot use it, I hope to get one of these. 8)
Post Reply