Riding Lawn mower preferance....
Forum rules
Be kind. No government, state, or local politics allowed. Admin has final decision for any/all removed posts.
Be kind. No government, state, or local politics allowed. Admin has final decision for any/all removed posts.
- Chuck(G)
- 6 valves
- Posts: 5679
- Joined: Fri Mar 19, 2004 12:48 am
- Location: Not out of the woods yet.
- Contact:
- Joe Baker
- 5 valves
- Posts: 1162
- Joined: Fri Mar 19, 2004 8:37 am
- Location: Knoxville, TN
Re: Riding Lawn mower preferance....
The engineer in me is unable to arrive at a recommendation until I know the requirements. Is your lot flat or hilly? Lots of trees and flower beds, or just open grass? What kind of grass? Are you looking to just keep it under control, or are you willing to spend some $$ for a machine that will really manicure it? Which is the higher priority: getting done quickly or spending a little more time and having it look perfect? Do you have a budget?Greg wrote:I have recently moved to a new home with a rather large yard (100X200) and it looks like I am going to end up buying a riding lawn mower. Anyone willing to volunteer some preferances and reasons for buying or avoiding a certain model?
Thanks for any advice,
Greg
So far, your question is a little like "Hey, guys, I'm going to buy a tuba. What kind should I buy?" Give a little more input and I believe you'll get a lot more output.
_____________________________
Joe Baker, who advises hanging onto the push mower in any case, for trim work and tight spots.
"Luck" is what happens when preparation meets opportunity -- Seneca
-
- 3 valves
- Posts: 337
- Joined: Fri Mar 19, 2004 1:24 am
- Location: Atlanta, GA
- Contact:
Of course there's the question, do you want a Lawn Tractor, or only a Lawn Mower? That being said my uncle bought a Kubota, and I really like it, it's extremely simple. I found out while looking for lawn tractor's with him that the higher end models don't have the horsepower that the model's you'll find at your local big hardware store. For example, his Kubota is only 17.5 hp, but for the same amount of money he could have gotten a Craftsmen tractor with more than twice that amount of hp. He went with Kubota because of its reputation.
My $.02, and it's probably not worth that.
My $.02, and it's probably not worth that.
Thomas Peacock
Huttl for life
Schilke 66
Huttl for life
Schilke 66
- windshieldbug
- Once got the "hand" as a cue
- Posts: 11513
- Joined: Tue Mar 01, 2005 4:41 pm
- Location: 8vb
-
- 6 valves
- Posts: 2530
- Joined: Mon Mar 22, 2004 11:09 pm
- Location: alabama gulf coast
-
- 3 valves
- Posts: 313
- Joined: Sun Mar 21, 2004 7:27 pm
I'm house sitting for my uncle (nice vacation) in a small neighborhood of McMansions on 1-2 acre lots. I've noticed that the professionals who mow the other yards in the neighborhood all use large walk-behind mowers. I have to use a 20hp Scotts yard tractor to mow the lawn and I can see why pros don't use yard tractors. The ride is extremely bumpy, trying to turn sharply carves ruts, and it cant get close enough to cut around ledges, signs, and mailboxes. Frankly I would rather walk than ride on that bumpy tractor.
-Eric
-Eric
- Joe Baker
- 5 valves
- Posts: 1162
- Joined: Fri Mar 19, 2004 8:37 am
- Location: Knoxville, TN
Thanks for filling in some of the gaps, Greg.
First, 100x200 isn't all THAT big. Just about any rider should knock it out in an hour or less. Since it's flat, and you're planning to add trees, maneuverability is going to be your number one priority. You don't need the thing to be any wider than 36", and you should look for a tight turning radius. You don't need more than 12 HP for a flat lawn, though a little more power won't hurt any, either, especially if you plan to mulch (and even moreso if you expect to miss a week now and then!) I'd be looking for one that has a short turning radius and able to change speed without stopping (many -- my own, for example -- require you to come to a dead stop to change gear ratios. Never again...) If I were buying for a lawn of this size, I'd be looking at a rear-engine rather than a front engine, with one longer blade rather than two shorter ones. I'd look for a mulching attachment. And I'd make sure the seat is comfortable and padded.
I've always been a fan of Briggs & Stratton engines, but I've got a Tecumseh I bought three years ago (6.5 HP, on my 21" high-wheel walk-behind) that starts on the first pull, runs like a hose, and has required ZERO work other than annually changing the oil and replacing the air filter), so I think they must have really improved their quality. I haven't looked at any of the fancier name brands, so I don't know if they have their own engines or if they use B&S or Tecumseh; if they have their own, you'll want to do some research to see how reliable they are, and whether there's a qualified repair person in your area.
Good luck!
___________________________
Joe Baker, who has been quite happy with his $400 used 17 HP, 42" cut mower for a hilly lot that's about 350x120 -- but who cuts his relatively small front yard with a walk-behind so it'll look nicer.
First, 100x200 isn't all THAT big. Just about any rider should knock it out in an hour or less. Since it's flat, and you're planning to add trees, maneuverability is going to be your number one priority. You don't need the thing to be any wider than 36", and you should look for a tight turning radius. You don't need more than 12 HP for a flat lawn, though a little more power won't hurt any, either, especially if you plan to mulch (and even moreso if you expect to miss a week now and then!) I'd be looking for one that has a short turning radius and able to change speed without stopping (many -- my own, for example -- require you to come to a dead stop to change gear ratios. Never again...) If I were buying for a lawn of this size, I'd be looking at a rear-engine rather than a front engine, with one longer blade rather than two shorter ones. I'd look for a mulching attachment. And I'd make sure the seat is comfortable and padded.
I've always been a fan of Briggs & Stratton engines, but I've got a Tecumseh I bought three years ago (6.5 HP, on my 21" high-wheel walk-behind) that starts on the first pull, runs like a hose, and has required ZERO work other than annually changing the oil and replacing the air filter), so I think they must have really improved their quality. I haven't looked at any of the fancier name brands, so I don't know if they have their own engines or if they use B&S or Tecumseh; if they have their own, you'll want to do some research to see how reliable they are, and whether there's a qualified repair person in your area.
Good luck!
___________________________
Joe Baker, who has been quite happy with his $400 used 17 HP, 42" cut mower for a hilly lot that's about 350x120 -- but who cuts his relatively small front yard with a walk-behind so it'll look nicer.
"Luck" is what happens when preparation meets opportunity -- Seneca
- Kevin Miller
- bugler
- Posts: 227
- Joined: Fri Mar 19, 2004 6:33 am
- Contact:
- Chuck(G)
- 6 valves
- Posts: 5679
- Joined: Fri Mar 19, 2004 12:48 am
- Location: Not out of the woods yet.
- Contact:
-
- 6 valves
- Posts: 2530
- Joined: Mon Mar 22, 2004 11:09 pm
- Location: alabama gulf coast
- Chuck(G)
- 6 valves
- Posts: 5679
- Joined: Fri Mar 19, 2004 12:48 am
- Location: Not out of the woods yet.
- Contact:
- Dylan King
- YouTube Tubist
- Posts: 1602
- Joined: Tue Aug 17, 2004 1:56 am
- Location: Weddington, NC, USA.
- Contact:
- Matt G
- 5 valves
- Posts: 1196
- Joined: Fri Mar 19, 2004 9:24 am
- Location: Quahog, RI
I agree here. Your yard is really pretty small (less than a half-acre).Joe Baker wrote:
You don't need the thing to be any wider than 36", and you should look for a tight turning radius. You don't need more than 12 HP for a flat lawn, though a little more power won't hurt any, either, especially if you plan to mulch (and even moreso if you expect to miss a week now and then!) I'd be looking for one that has a short turning radius and able to change speed without stopping (many -- my own, for example -- require you to come to a dead stop to change gear ratios. Never again...) If I were buying for a lawn of this size, I'd be looking at a rear-engine rather than a front engine, with one longer blade rather than two shorter ones. I'd look for a mulching attachment. And I'd make sure the seat is comfortable and padded.
I remember these being popular down home (FL) for people with yards from about 1/3-2 acres:

11HP to 15hp, great turn radius, good build quality and reliability. You can even stand it on end for storage and repair. Starts at about $1200.
Dillon/Walters CC
Meinl Weston 2165
Meinl Weston 2165
- Lew
- 5 valves
- Posts: 1700
- Joined: Fri Mar 19, 2004 4:57 pm
- Location: Annville, PA
I had one of those (back when I used to cut my own grass) and although it was reliable and did a decent job, the turning radius wasn't so great. I would look for one that specifically says it has a very tight turning radius. I seem to remember someone advertising a "zero turning radius" mower.Matthew Gilchrest wrote:I agree here. Your yard is really pretty small (less than a half-acre).Joe Baker wrote:
You don't need the thing to be any wider than 36", and you should look for a tight turning radius. You don't need more than 12 HP for a flat lawn, though a little more power won't hurt any, either, especially if you plan to mulch (and even moreso if you expect to miss a week now and then!) I'd be looking for one that has a short turning radius and able to change speed without stopping (many -- my own, for example -- require you to come to a dead stop to change gear ratios. Never again...) If I were buying for a lawn of this size, I'd be looking at a rear-engine rather than a front engine, with one longer blade rather than two shorter ones. I'd look for a mulching attachment. And I'd make sure the seat is comfortable and padded.
I remember these being popular down home (FL) for people with yards from about 1/3-2 acres:
11HP to 15hp, great turn radius, good build quality and reliability. You can even stand it on end for storage and repair. Starts at about $1200.
OTOH, a riding mower seems like overkill for a half an acre. I would think that a good self-propelled walk behind mower would be more than enough.
Besson 983
Henry Distin 1897 BBb tuba
Henry Distin 1898 BBb Helicon
Eastman EBB226
Henry Distin 1897 BBb tuba
Henry Distin 1898 BBb Helicon
Eastman EBB226
- Dylan King
- YouTube Tubist
- Posts: 1602
- Joined: Tue Aug 17, 2004 1:56 am
- Location: Weddington, NC, USA.
- Contact:
- windshieldbug
- Once got the "hand" as a cue
- Posts: 11513
- Joined: Tue Mar 01, 2005 4:41 pm
- Location: 8vb
- Dylan King
- YouTube Tubist
- Posts: 1602
- Joined: Tue Aug 17, 2004 1:56 am
- Location: Weddington, NC, USA.
- Contact:
It's funny. Now that I think about it, I water that grass all the time and it never grows. When I neglect watering, it never dies. Wow. It is astro-turf. No wonder my knees have been bothering me lately.windshieldbug wrote:No, but we noticed the Astro-Turf!...MellowSmokeMan wrote:I wonder if anyone actually noticed my lawn mower in this picture.
- ThomasDodd
- 5 valves
- Posts: 1161
- Joined: Tue Mar 23, 2004 11:37 am
- Location: BFE, Mississippi
Find a used rider (pull the deck) or ATV and hook one of These up.


That give you a better cutting system (better for the grass), good mulching, and low mainenance, lower power requriements (so less fuel). If you go ATV, you also have an ATV for fun, a real dual use system :)
Note, When my mower deck finaly rusts through enough I cannot use it, I hope to get one of these. 8)


That give you a better cutting system (better for the grass), good mulching, and low mainenance, lower power requriements (so less fuel). If you go ATV, you also have an ATV for fun, a real dual use system :)
Note, When my mower deck finaly rusts through enough I cannot use it, I hope to get one of these. 8)